Census Data for Loyalton
As far as we can tell, Loyalton has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Loyalton, you might be interested in some nearby communities where we do:
- Onaka
(11 miles [17.7 km] to the southwest)
- Roscoe
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Roscoe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roscoe
- Roscoe is located in Edmunds County
- Jump to TripAdvisor's Tourism page for Roscoe <1>
- Ipswich
(16 miles [25.7 km] to the northeast)
- Tolstoy
(17 miles [27.4 km] to the west)
- Cresbard
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Cresbard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cresbard
- Cresbard is located in Faulk County
- Jump to TripAdvisor's Tourism page for Cresbard <1>
- Faulkton
(18 miles [29 km] to the southeast)
- Seneca
(19 miles [30.6 km] to the southwest)
- Bowdle
(21 miles [33.8 km] to the northwest)
- Hosmer
(22 miles [35.4 km] to the northwest)
- Hoven
(24 miles [38.6 km] to the west)
- Chelsea
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Chelsea have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chelsea
- Chelsea is located in Faulk County
- Lebanon
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Potter County
- Jump to TripAdvisor's Tourism page for Lebanon <1>
- Continue List (15 more) ...
- Orient
(28 miles [45.1 km] to the south)
- Hillsview
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Hillsview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillsview
- Hillsview is located in McPherson County
Edmunds County ...
Loyalton is located in Edmunds County<3>.
For more information, please visit our Census Page for Edmunds County.
Miscellaneous Information for Loyalton ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Edmunds County or the community of Loyalton:
- The GNIS Codes ...
- The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Loyalton:
- GNIS ID for Loyalton: 1256266
- GNIS ID for Edmunds County: 1266972
- GNIS ID for State of South Dakota: 1785534
- Misc. Census Codes ...
- Loyalton is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Loyalton.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Loyalton. If you can help, please contact us through our Feedback Page.
The official website for State of South Dakota: https://www.sd.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
<1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | If you're interested in how the shape of South Dakota's counties, including Edmunds, have changed over time, we recommend the Atlas of Historical County Boundaries. |