Nearest Communities to Grosse,
Listed County-By-County
The purpose of this page is to identify those communities that are closest to Grosse, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Grosse:
We have great-grandparents who lived in a small community in the northwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Keep in mind that when we give a distance, it's a 'straight-line' distance from Grosse.<1>
If you're researching your genealogy, we hope that the following information helps.
Grosse is located in Brule County.
The following 6 counties adjoin and form the boundaries of Brule County: Aurora, Buffalo, Charles Mix, Gregory, Jerauld & Lyman.
Our Gazetteer shows that there are 28 communities within 40 miles [64.4 km]<1> of Grosse. Of these communities, 20 are located in counties other than Brule County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Grosse (which is Brule County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Grosse
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Brule County (where Grosse resides)
- County Seat for Brule: Chamberlain
- Genealogy Websites ...
- Nearest Communities to Grosse ...
- These communities are listed by their distance from Grosse.
- Chamberlain
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Chamberlain have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chamberlain
- Chamberlain is located in Brule County
- Population from the 2020 Census: 2,348 people
- Jump to TripAdvisor's Tourism page for Chamberlain <4>
- Pukwana
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Pukwana have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pukwana
- Pukwana is located in Brule County
- Population from the 2020 Census: 303 people
- Jump to TripAdvisor's Tourism page for Pukwana <4>
- Lyonville
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Lyonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lyonville
- Lyonville is located in Brule County
- Estimated population in 2014: 49 people
- Grandview
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Grandview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grandview
- Grandview is located in Brule County
- Kimball
(20 miles [32.2 km] to the southeast)
- Ola
(22 miles [35.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Ola. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Ola
- Ola is located in Brule County
- Estimated population in 2014: 108 people
- Eagle
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Eagle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eagle
- Eagle is located in Brule County
- Estimated population in 2014: 17 people
- Bijou Hills
(29 miles [46.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Bijou Hills. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Bijou Hills
- Bijou Hills is located in Brule County
- Buffalo County
- County Seat for Buffalo: Gann Valley
- Genealogy Websites ...
- Nearest Communities to Grosse ...
- These communities are listed by their distance from Grosse.
- Crow Creek
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Crow Creek. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Crow Creek
- Crow Creek is located in Buffalo County
- Shelby
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Shelby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelby
- Shelby is located in Buffalo County
- Estimated population in 2014: 96 people
- Lees Corner
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Lees Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lees Corner
- Lees Corner is located in Buffalo County
- Fort Thompson
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Fort Thompson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Thompson
- Fort Thompson is located in Buffalo County
- Population from the 2010 Census: 1,282 people
- Jump to TripAdvisor's Tourism page for Fort Thompson <4>
- Gann Valley
(16 miles [25.7 km] to the northeast)
- Hand County
- County Seat for Hand: Miller
- Genealogy Websites ...
- Nearest Communities to Grosse ...
- These communities are listed by their distance from Grosse.
- Ames
(25 miles [40.2 km] to the north)
- Jump to our Gazetteer entry for Ames
- Ames is located in Hand County
- Danforth
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Danforth have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Danforth
- Danforth is located in Hand County
- Hyde County
- County Seat for Hyde: Highmore
- Genealogy Websites ...
- Nearest Communities to Grosse ...
- These communities are listed by their distance from Grosse.
- Macs Corner
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Macs Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Macs Corner
- Macs Corner is located in Hyde County
- Stephan
(23 miles [37 km] to the north)
- Jerauld County
- County Seat for Jerauld: Wessington Springs
- Genealogy Websites ...
- Nearest Communities to Grosse ...
- These communities are listed by their distance from Grosse.
- Spring Valley Colony
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Spring Valley Colony have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Valley Colony
- Spring Valley Colony is located in Jerauld County
- Crow Lake
(27 miles [43.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Crow Lake. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Crow Lake
- Crow Lake is located in Jerauld County
- Lyman County
- County Seat for Lyman: Kennebec
- Genealogy Websites ...
- Nearest Communities to Grosse ...
- These communities are listed by their distance from Grosse.
- Oacoma
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Oacoma have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oacoma
- Oacoma is located in Lyman County
- Population from the 2020 Census: 478 people
- Jump to TripAdvisor's Tourism page for Oacoma <4>
- East Lyman
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for East Lyman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Lyman
- East Lyman is located in Lyman County
- Estimated population in 2019: 145 people
- Reliance
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Reliance have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reliance
- Reliance is located in Lyman County
- Population from the 2020 Census: 210 people
- Jump to TripAdvisor's Tourism page for Reliance <4>
- Council House
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Council House have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Council House
- Council House is located in Lyman County
- Lower Brule
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Lower Brule have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lower Brule
- Lower Brule is located in Lyman County
- Population from the 2010 Census: 24 people
- Jump to TripAdvisor's Tourism page for Lower Brule <4>
- Lyman
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Lyman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lyman
- Lyman is located in Lyman County
- Estimated population in 2014: 43 people
- Iona
(27 miles [43.5 km] to the south)
- Kennebec
(28 miles [45.1 km] to the west)
- Tripp County
- County Seat for Tripp: Winner
- Genealogy Websites ...
- Nearest Communities to Grosse ...
- Hamill
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Hamill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamill
- Hamill is located in Tripp County
- Population from the 2010 Census: 11 people
- Jump to TripAdvisor's Tourism page for Hamill <4>
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Grosse) to Point B.Our distance measurements begin at a specific point in Grosse. The point we use is located at these GPS coordinates - Latitude: 43.9272, Longitude: -99.2865 In this case, the coordinates for Grosse have been provided by the Geographic Names Information System (GNIS). |
<2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |