Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Emery had a population of 218 people in 1895 with a post office and railroad service. In 2020, Emery had a population of 454 people.
The following communities are listed based on their distance from Emery, with the one closest to Emery listed first.
- Bridgewater
(6 miles [9.7 km] to the southeast)
- Spencer
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Spencer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spencer
- Spencer is located in McCook County
- Population from the 2020 Census: 145 people
- Jump to TripAdvisor's Tourism page for Spencer <2>
- Alexandria
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Alexandria have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alexandria
- Alexandria is located in Hanson County
- Population from the 2020 Census: 650 people
- Jump to TripAdvisor's Tourism page for Alexandria <2>
- Farmer
(9 miles [14.5 km] to the north)
- Fulton
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fulton
- Fulton is located in Hanson County
- Population from the 2020 Census: 96 people
- Jump to TripAdvisor's Tourism page for Fulton <2>
- Salem
(14 miles [22.5 km] to the northeast)
- Milltown
(15 miles [24.1 km] to the southwest)
- Canistota
(16 miles [25.7 km] to the east)
- Ethan
(18 miles [29 km] to the west)
- Freeman
(19 miles [30.6 km] to the southeast)
- Canova
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Canova have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Canova
- Canova is located in Miner County
- Population from the 2020 Census: 99 people
- Jump to TripAdvisor's Tourism page for Canova <2>
- Marion
(21 miles [33.8 km] to the southeast)
- Monroe
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe
- Monroe is located in Turner County
- Population from the 2020 Census: 156 people
- Jump to TripAdvisor's Tourism page for Monroe <2>
- Mitchell
(21 miles [33.8 km] to the west)
- Montrose
(22 miles [35.4 km] to the east)
- Farwell
(22 miles [35.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Farwell. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Farwell
- Farwell is located in Hanson County
- Google driving directions:
- From your current location to Farwell
- From Emery to Farwell
- Parkston
(23 miles [37 km] to the southwest)
- Olivet
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Olivet have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olivet
- Olivet is located in Hutchinson County
- Population from the 2020 Census: 70 people
- Jump to TripAdvisor's Tourism page for Olivet <2>
- Menno
(25 miles [40.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Menno. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Menno
- Menno is located in Hutchinson County
- Population from the 2020 Census: 615 people
- Jump to TripAdvisor's Tourism page for Menno <2>
- Google driving directions:
- From your current location to Menno
- From Emery to Menno
- Humboldt
(27 miles [43.5 km] to the east)
- Roswell
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Roswell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roswell
- Roswell is located in Miner County
- Estimated population in 2014: 70 people
- Parker
(28 miles [45.1 km] to the southeast)
- Howard
(28 miles [45.1 km] to the north)
- Vilas
(28 miles [45.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Vilas. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Vilas
- Vilas is located in Miner County
- Population from the 2020 Census: 19 people
- Google driving directions:
- From your current location to Vilas
- From Emery to Vilas
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Emery. If you can help, please contact us through our Feedback Page.
The official website for State of South Dakota: https://www.sd.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Emery, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |