|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Michaels Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Michaels Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Michaels Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Orient
(5 miles [8 km] to the north)
- Miranda
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Miranda
- Miranda is located in Faulk County
- Estimated population in 2014: 122 people
- Rockham
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Rockham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockham
- Rockham is located in Faulk County
- Population from the 2020 Census: 33 people
- Jump to TripAdvisor's Tourism page for Rockham <2>
- Faulkton
(14 miles [22.5 km] to the north)
- Millard
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Millard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millard
- Millard is located in Faulk County
- Ree Heights
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Ree Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ree Heights
- Ree Heights is located in Hand County
- Population from the 2020 Census: 58 people
- Jump to TripAdvisor's Tourism page for Ree Heights <2>
- Miller
(22 miles [35.4 km] to the south)
- Wecota
(23 miles [37 km] to the north)
- Saint Lawrence
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Saint Lawrence have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Lawrence
- Saint Lawrence is located in Hand County
- Population from the 2020 Census: 181 people
- Jump to TripAdvisor's Tourism page for Saint Lawrence <2>
- Cresbard
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Cresbard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cresbard
- Cresbard is located in Faulk County
- Population from the 2020 Census: 101 people
- Jump to TripAdvisor's Tourism page for Cresbard <2>
- Seneca
(25 miles [40.2 km] to the northwest)
- Highmore
(26 miles [41.8 km] to the southwest)
- Redfield
(29 miles [46.7 km] to the east)
- Chelsea
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Chelsea have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chelsea
- Chelsea is located in Faulk County
- Population from the 2020 Census: 26 people
Off-the-Road Links ...
The official website for State of South Dakota: sd.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Michaels Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.8303, Longitude: -99.1109 In this case, the coordinates for the St. Michaels Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|