Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the St. Bedes Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Bedes Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the St. Bedes Cemetery. We've listed the following cemeteries based on their distance, with the closest first.

Wakpala
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for Wakpala
- Wakpala is located in Corson County
- Estimated population in 2014: 312 people
- Jump to TripAdvisor's Tourism page for Wakpala <2>
Mobridge
(9 miles [14.5 km] to the southeast)
- Jump to our Gazetteer entry for Mobridge
- Mobridge is located in Walworth County
- Population from the 2020 Census: 3,373 people
- Jump to TripAdvisor's Tourism page for Mobridge <2>
Mahto
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Mahto
- Mahto is located in Corson County
- Jump to TripAdvisor's Tourism page for Mahto <2>
Little Eagle
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Little Eagle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Eagle
- Little Eagle is located in Corson County
- Population from the 2010 Census: 319 people
- Jump to TripAdvisor's Tourism page for Little Eagle <2>
Kenel
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Kenel
- Kenel is located in Corson County
- Estimated population in 2014: 61 people
Glenham
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Glenham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glenham
- Glenham is located in Walworth County
- Population from the 2020 Census: 103 people
- Jump to TripAdvisor's Tourism page for Glenham <2>
Trail City
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Trail City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trail City
- Trail City is located in Corson County
- Jump to TripAdvisor's Tourism page for Trail City <2>
McLaughlin
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for McLaughlin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McLaughlin
- McLaughlin is located in Corson County
- Population from the 2020 Census: 642 people
- Jump to TripAdvisor's Tourism page for McLaughlin <2>
Pollock
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Pollock have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pollock
- Pollock is located in Campbell County
- Population from the 2020 Census: 227 people
- Jump to TripAdvisor's Tourism page for Pollock <2>
Mound City
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Mound City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mound City
- Mound City is located in Campbell County
- Population from the 2020 Census: 65 people
- Jump to TripAdvisor's Tourism page for Mound City <2>
Glencross
(23 miles [37 km] to the southwest)
- Jump to our Gazetteer entry for Glencross
- Glencross is located in Dewey County
- Jump to TripAdvisor's Tourism page for Glencross <2>
Herreid
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Herreid have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Herreid
- Herreid is located in Campbell County
- Population from the 2020 Census: 419 people
- Jump to TripAdvisor's Tourism page for Herreid <2>
Selby
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Selby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Selby
- Selby is located in Walworth County
- Population from the 2020 Census: 612 people
- Jump to TripAdvisor's Tourism page for Selby <2>
Bullhead
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Bullhead have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bullhead
- Bullhead is located in Corson County
- Jump to TripAdvisor's Tourism page for Bullhead <2>
Akaska
(29 miles [46.7 km] to the southeast)
- Jump to our Gazetteer entry for Akaska
- Akaska is located in Walworth County
- Population from the 2020 Census: 47 people
- Jump to TripAdvisor's Tourism page for Akaska <2>
Westfield
(29 miles [46.7 km] to the northeast)
- Jump to our Gazetteer entry for Westfield
- Westfield is located in Emmons County (ND)

Off-the-Road Links ...

The official website for State of South Dakota: sd.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Bedes Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.6581, Longitude: -100.5257 In this case, the coordinates for the St. Bedes Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.