Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Redeemer Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Redeemer Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Redeemer Cemetery. We've listed the following communities based on their distance, with the closest first.
- Bowdle
(Less than 2 miles to the south)
- Hosmer
(11 miles [17.7 km] to the northeast)
- Java
(11 miles [17.7 km] to the west)
- Hillsview
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Hillsview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillsview
- Hillsview is located in McPherson County
- Population from the 2020 Census: 3 people
- Roscoe
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Roscoe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roscoe
- Roscoe is located in Edmunds County
- Population from the 2020 Census: 285 people
- Jump to TripAdvisor's Tourism page for Roscoe <2>
- Hoven
(16 miles [25.7 km] to the south)
- Tolstoy
(17 miles [27.4 km] to the south)
- Selby
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Selby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Selby
- Selby is located in Walworth County
- Population from the 2020 Census: 612 people
- Jump to TripAdvisor's Tourism page for Selby <2>
- Lowry
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Lowry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowry
- Lowry is located in Walworth County
- Population from the 2020 Census: 6 people
- Onaka
(20 miles [32.2 km] to the southeast)
- Loyalton
(21 miles [33.8 km] to the southeast)
- Beebe
(21 miles [33.8 km] to the east)
- Eureka
(21 miles [33.8 km] to the north)
- Akaska
(24 miles [38.6 km] to the west)
- Mound City
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Mound City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mound City
- Mound City is located in Campbell County
- Population from the 2020 Census: 65 people
- Jump to TripAdvisor's Tourism page for Mound City <2>
- Lebanon
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Potter County
- Population from the 2020 Census: 43 people
- Jump to TripAdvisor's Tourism page for Lebanon <2>
- Seneca
(28 miles [45.1 km] to the south)
- Ipswich
(29 miles [46.7 km] to the east)
Off-the-Road Links ...
The official website for State of South Dakota: https://www.sd.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Redeemer Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.4670, Longitude: -99.6480 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |