|  | 
Nearby Communities in the 1890sWe largely built the following list with information that came from an Atlas published by Rand McNally in 1895.  The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available.  Over time, we will continue to add communities that we find during our research. If it applies, we indicate whether a community no longer exists and is now historic.<1> While we didn't find Smallwood in the Atlas, the following communities of the 1890's would have been found near the current location of Smallwood.  The following communities are listed based on their distance, with the one closest to Smallwood listed first. 
Ridgeway(Less than 2 miles to the north)
Simpson(5 miles [8 km] to the west)
 
Note: The GPS coordinates that we are using for Simpson have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for SimpsonSimpson is located in Fairfield CountySharp(7 miles [11.3 km] to the south)
 
Note: The GPS coordinates that we are using for Sharp have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for SharpSharp is located in Richland CountyLongtown(7 miles [11.3 km] to the northeast)
 
Note: The GPS coordinates that we are using for Longtown have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for LongtownLongtown is located in Fairfield CountyFlint Hill(8 miles [12.9 km] to the north)
 
Note: The GPS coordinates that we are using for Flint Hill have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Flint HillFlint Hill is located in Fairfield CountyPleasant ‑ Historic(8 miles [12.9 km] to the southwest)
 
Note: The GPS coordinates that we are using for Pleasant have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for PleasantPleasant is located in Richland CountyRockton(8 miles [12.9 km] to the northwest)
 
Note: The GPS coordinates that we are using for Rockton have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for RocktonRockton is located in Fairfield CountyKillian(9 miles [14.5 km] to the south)
 
Note: The GPS coordinates that we are using for Killian have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for KillianKillian is located in Richland CountyLever ‑ Historic(10 miles [16.1 km] to the southwest)
 
Note: The GPS coordinates that we are using for Lever have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for LeverLever is located in Richland CountyWinnsboro(10 miles [16.1 km] to the northwest)
Rion(10 miles [16.1 km] to the west)
Jennings(12 miles [19.3 km] to the west)
 
Note: The GPS coordinates that we are using for Jennings have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for JenningsJennings is located in Fairfield CountyBookman(14 miles [22.5 km] to the southwest)
 
Note: The GPS coordinates that we are using for Bookman have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for BookmanBookman is located in Richland CountyAdger(14 miles [22.5 km] to the northwest)
 
Note: We haven't been able to verify our GPS coordinates for Adger.  Although the coordinates have been estimated, they should be in the vicinity.<4>Jump to our Gazetteer entry for AdgerAdger is located in Fairfield CountyGoogle driving directions:From your current location to Adger From Smallwood to Adger Liberty Hill(15 miles [24.1 km] to the northeast)
Cantey(16 miles [25.7 km] to the east)
 
Note: The GPS coordinates that we are using for Cantey have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for CanteyCantey is located in Kershaw CountyWhite Oak(16 miles [25.7 km] to the northwest)
Wallaceville(17 miles [27.4 km] to the west)
 
Note: The GPS coordinates that we are using for Wallaceville have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for WallacevilleWallaceville is located in Fairfield CountyBallentine(19 miles [30.6 km] to the southwest)
Irmo(19 miles [30.6 km] to the southwest)
Leaphart(19 miles [30.6 km] to the southwest)
 
Note: The GPS coordinates that we are using for Leaphart have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for LeaphartLeaphart is located in Lexington CountyCamden(19 miles [30.6 km] to the east)
Jenkinsville(19 miles [30.6 km] to the west)
White Rock(20 miles [32.2 km] to the southwest)
Columbia(20 miles [32.2 km] to the south)
Woodward(20 miles [32.2 km] to the northwest)
 
Note: We haven't been able to verify our GPS coordinates for Woodward.  Although the coordinates have been estimated, they should be in the vicinity.<4>Jump to our Gazetteer entry for WoodwardWoodward is located in Fairfield CountyGoogle driving directions:From your current location to Woodward From Smallwood to Woodward Monticello(20 miles [32.2 km] to the west)
 
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists.  However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now.  Unfortunately our sources of data have proven to be unreliable.  If you can provide us with more specific information about Smallwood, please let us know so that we can improve our accuracy. |  | <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |  | <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS).  While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |  | <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates.  That said, we have some confidence that we have placed the marker near the actual location.  A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |  |  |