Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Roseland had a post office and no railroad service.
The following communities are listed based on their distance from Roseland, with the one closest to Roseland listed first.
- Montmorenci
(2 miles [3.2 km] to the southeast)- Jump to our Gazetteer entry for Montmorenci
- Montmorenci is located in Aiken County
- Jump to TripAdvisor's Tourism page for Montmorenci <2>
- Aiken
(3 miles [4.8 km] to the northwest)- Jump to our Gazetteer entry for Aiken
- Aiken is located in Aiken County
- Population from the 2020 Census: 31,121 people
- Jump to TripAdvisor's Tourism page for Aiken <2>
- Croft
(5 miles [8 km] to the north) - Oakwood
(5 miles [8 km] to the east) - Graniteville
(7 miles [11.3 km] to the west)- Jump to our Gazetteer entry for Graniteville
- Graniteville is located in Aiken County
- Jump to TripAdvisor's Tourism page for Graniteville <2>
- Langley
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Langley
- Langley is located in Aiken County
- Jump to TripAdvisor's Tourism page for Langley <2>
- Vaucluse
(9 miles [14.5 km] to the northwest)- Jump to our Gazetteer entry for Vaucluse
- Vaucluse is located in Aiken County
- Jump to TripAdvisor's Tourism page for Vaucluse <2>
- Talatha
(10 miles [16.1 km] to the south)- Jump to our Gazetteer entry for Talatha
- Talatha is located in Aiken County
- Windsor
(10 miles [16.1 km] to the southeast)- Jump to our Gazetteer entry for Windsor
- Windsor is located in Aiken County
- Population from the 2020 Census: 143 people
- Jump to TripAdvisor's Tourism page for Windsor <2>
- Milledgeville ‑ Historic
(10 miles [16.1 km] to the northwest)- Note: The GPS coordinates that we are using for Milledgeville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milledgeville
- Milledgeville is located in Aiken County
- Bath
(11 miles [17.7 km] to the west)- Jump to our Gazetteer entry for Bath
- Bath is located in Aiken County
- Jump to TripAdvisor's Tourism page for Bath <2>
- Eureka
(11 miles [17.7 km] to the northwest) - Kitchings Mill
(11 miles [17.7 km] to the east)- Note: The GPS coordinates that we are using for Kitchings Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kitchings Mill
- Kitchings Mill is located in Aiken County
- Kitchings Mill has also been known as:
- Kinchens Mill
- Beech Island
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Beech Island
- Beech Island is located in Aiken County
- Jump to TripAdvisor's Tourism page for Beech Island <2>
- Hawthorne ‑ Historic
(14 miles [22.5 km] to the south) - White Pond
(14 miles [22.5 km] to the southeast)- Note: The GPS coordinates that we are using for White Pond have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Pond
- White Pond is located in Aiken County
- Hamburg
(16 miles [25.7 km] to the west) - Jackson
(16 miles [25.7 km] to the southwest)- Jump to our Gazetteer entry for Jackson
- Jackson is located in Aiken County
- Population from the 2020 Census: 1,815 people
- Jump to TripAdvisor's Tourism page for Jackson <2>
- Trenton
(16 miles [25.7 km] to the northwest)- Jump to our Gazetteer entry for Trenton
- Trenton is located in Edgefield County
- Population from the 2020 Census: 200 people
- Jump to TripAdvisor's Tourism page for Trenton <2>
- Williston
(17 miles [27.4 km] to the southeast)- Jump to our Gazetteer entry for Williston
- Williston is located in Barnwell County
- Population from the 2020 Census: 2,912 people
- Jump to TripAdvisor's Tourism page for Williston <2>
- Greenland ‑ Historic
(18 miles [29 km] to the south) - Augusta
(19 miles [30.6 km] to the west)- Jump to our Gazetteer entry for Augusta
- Augusta is located in Richmond County (GA)
- Jump to TripAdvisor's Tourism page for Augusta <2>
- Cowden
(19 miles [30.6 km] to the south) - Wagener
(19 miles [30.6 km] to the northeast)- Jump to our Gazetteer entry for Wagener
- Wagener is located in Aiken County
- Population from the 2020 Census: 845 people
- Jump to TripAdvisor's Tourism page for Wagener <2>
- Seivern
(19 miles [30.6 km] to the northeast)- Jump to our Gazetteer entry for Seivern
- Seivern is located in Aiken County
- Poverty Hill
(19 miles [30.6 km] to the west)- Note: The GPS coordinates that we are using for Poverty Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poverty Hill
- Poverty Hill is located in Edgefield County
Off-the-Road Links ...
The official website for Aiken County: www.aikencounty.net/
The official website for State of South Carolina: https://sc.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Roseland, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |