Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Ramsey Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Ramsey Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Ramsey Cemetery. We've listed the following communities based on their distance, with the closest first.

Little Rock
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for Little Rock
- Little Rock is located in Dillon County
- Jump to TripAdvisor's Tourism page for Little Rock <2>
Minturn
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for Minturn
- Minturn is located in Dillon County
- Jump to TripAdvisor's Tourism page for Minturn <2>
Dillon
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Dillon
- Dillon is located in Dillon County
- Population from the 2020 Census: 6,289 people
- Jump to TripAdvisor's Tourism page for Dillon <2>
Oakland Crossroads
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Oakland Crossroads
- Oakland Crossroads is located in Dillon County
Brownsville
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for Brownsville
- Brownsville is located in Marlboro County
Hamer
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Hamer
- Hamer is located in Dillon County
- Jump to TripAdvisor's Tourism page for Hamer <2>
Clio
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Clio
- Clio is located in Marlboro County
- Population from the 2020 Census: 645 people
- Jump to TripAdvisor's Tourism page for Clio <2>
Latta
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Latta
- Latta is located in Dillon County
- Population from the 2020 Census: 1,273 people
- Jump to TripAdvisor's Tourism page for Latta <2>
Red Bluff
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Red Bluff. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Red Bluff
- Red Bluff is located in Marlboro County
Blenheim
(10 miles [16.1 km] to the west)
- Jump to our Gazetteer entry for Blenheim
- Blenheim is located in Marlboro County
- Population from the 2020 Census: 139 people
- Jump to TripAdvisor's Tourism page for Blenheim <2>
Rowland
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Rowland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowland
- Rowland is located in Robeson County (NC)
- Population from the 2020 Census: 985 people
- Jump to TripAdvisor's Tourism page for Rowland <2>
Alfordsville
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Alfordsville
- Alfordsville is located in Robeson County (NC)
Drake
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Drake
- Drake is located in Marlboro County
Sellers
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Sellers
- Sellers is located in Marion County
- Population from the 2020 Census: 199 people
- Jump to TripAdvisor's Tourism page for Sellers <2>
Floydale
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Floydale
- Floydale is located in Dillon County
- Jump to TripAdvisor's Tourism page for Floydale <2>
Tatum
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Tatum
- Tatum is located in Marlboro County
- Population from the 2020 Census: 68 people
- Jump to TripAdvisor's Tourism page for Tatum <2>
Raemon
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Raemon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raemon
- Raemon is located in Robeson County (NC)
McColl
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for McColl
- McColl is located in Marlboro County
- Population from the 2020 Census: 1,943 people
- Jump to TripAdvisor's Tourism page for McColl <2>
Hasty
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hasty. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hasty
- Hasty is located in Scotland County (NC)
Bennettsville
(15 miles [24.1 km] to the northwest)
- Jump to our Gazetteer entry for Bennettsville
- Bennettsville is located in Marlboro County
- Population from the 2020 Census: 7,455 people
- Jump to TripAdvisor's Tourism page for Bennettsville <2>
Fork
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Fork
- Fork is located in Dillon County
- Jump to TripAdvisor's Tourism page for Fork <2>
Elrod
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Elrod have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elrod
- Elrod is located in Robeson County (NC)
McDonald
(17 miles [27.4 km] to the east)
- Jump to our Gazetteer entry for McDonald
- McDonald is located in Robeson County (NC)
- Population from the 2020 Census: 107 people
Raynham
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Raynham have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raynham
- Raynham is located in Robeson County (NC)
- Population from the 2020 Census: 68 people
Laughlin
(18 miles [29 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Laughlin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Laughlin
- Laughlin is located in Marion County

Off-the-Road Links ...

The official website for State of South Carolina: https://sc.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Ramsey Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.4696, Longitude: -79.4689 In this case, the coordinates for the Ramsey Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.