Welcome to Raemon ...
Raemon is located in Robeson County<1>.
Raemon is 160 feet [49 m] above sea level.<2>.
Time Zone: Raemon lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Codes for Raemon: 910 & 472<3>
Communities near Raemon ...
We have created a list of 10 communities that are near Raemon.
- Lumberton
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Lumberton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <5>
- Laurinburg
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Laurinburg have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurinburg
- Laurinburg is located in Scotland County
- Population from the 2020 Census: 14,896 people
- Jump to TripAdvisor's Tourism page for Laurinburg <5>
- Bennettsville
(19 miles [30.6 km] to the west)
- Dillon
(15 miles [24.1 km] to the south)
- Red Springs
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Red Springs <5>
- Pembroke
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Pembroke. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <5>
- Fairmont
(16 miles [25.7 km] to the southeast)
- Maxton
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Maxton have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxton
- Maxton is located in Robeson County
- Population from the 2020 Census: 2,332 people
- Jump to TripAdvisor's Tourism page for Maxton <5>
- McColl
(11 miles [17.7 km] to the west)
- Rowland
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Rowland have been provided by the GNIS.<6> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowland
- Rowland is located in Robeson County
- Population from the 2020 Census: 985 people
- Jump to TripAdvisor's Tourism page for Rowland <5>
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Raemon. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Raemon.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Raemon. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Raemon.
We also have a detailed list of newspapers that have been published in the area around Raemon. See our Newspapers Page for Raemon.
TripAdvisor Tourism Pages for Raemon ...
Looking for more information about Raemon? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Raemon, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Raemon.
Adding Raemon to Our Gazetteer ...
We originally found mention of Raemon in both the FIPS-55 and the GNIS. For more information, see the FIPS and GNIS Codes sections on our Miscellaneous Page.
From our notes, the earliest published mention we've found for Raemon was in the book titled SPV's Comprehensive Railroad Atlas of North America - Appalachia & Piedmont.
For more details, see References and Mentions for Raemon.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Raemon. If you can help, please contact us through our Feedback Page.
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | If you're interested in how the shape of North Carolina's counties, including Robeson, have changed over time, we recommend the Atlas of Historical County Boundaries. |
<2> | The elevation is an estimate for the area around Raemon - it will be higher in some places and lower in others. |
<3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 910 code has been Overlayed with the 472 area code. New phone numbers in the Raemon area will be assigned with one of these codes: 910 or 472. As a result, placing a call in the Raemon area will require 10-digit dialing (where you enter both the area code and then the phone number). |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<6> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |