|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Mt. Olivet Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Mt. Olivet Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Mt. Olivet Cemetery. We've listed the following communities based on their distance, with the closest first.
- White Oak
(4 miles [6.4 km] to the west)
- Adger
(5 miles [8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Adger. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Adger
- Adger is located in Fairfield County
- Google driving directions:
- From your current location to Adger
- From the Mt. Olivet Cemetery to Adger
- Winnsboro
(6 miles [9.7 km] to the southwest)
- Mitford
(6 miles [9.7 km] to the northeast)
- Winnsboro Mills
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Winnsboro Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winnsboro Mills
- Winnsboro Mills is located in Fairfield County
- Woodward
(8 miles [12.9 km] to the northwest)
- Blackstock
(9 miles [14.5 km] to the northwest)
- Great Falls
(10 miles [16.1 km] to the northeast)
- Ridgeway
(11 miles [17.7 km] to the south)
- Rion
(12 miles [19.3 km] to the southwest)
- Cornwell
(12 miles [19.3 km] to the northwest)
- Smallwood
(13 miles [20.9 km] to the south)
- Liberty Hill
(13 miles [20.9 km] to the east)
- Bell Town
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Bell Town have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Town
- Bell Town is located in Lancaster County
- Monticello
(16 miles [25.7 km] to the southwest)
- Blythewood
(17 miles [27.4 km] to the south)
- Richburg
(17 miles [27.4 km] to the north)
- Fort Lawn
(18 miles [29 km] to the northeast)
- Jenkinsville
(19 miles [30.6 km] to the southwest)
- Rock Hill
(19 miles [30.6 km] to the southwest)
- Eureka Mill
(19 miles [30.6 km] to the northwest)
- Chester
(19 miles [30.6 km] to the northwest)
- Irwin
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Irwin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Irwin
- Irwin is located in Lancaster County
- Gayle Mill
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Gayle Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gayle Mill
- Gayle Mill is located in Chester County
- Blair
(20 miles [32.2 km] to the west)
Off-the-Road Links ...
The official website for State of South Carolina: https://sc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Mt. Olivet Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.4654, Longitude: -81.0342 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|