Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Watson Run had a post office and railroad service.
The following communities are listed based on their distance from Watson Run, with the one closest to Watson Run listed first.
- Harmonsburg
(2 miles [3.2 km] to the west)
- Meadville Junction
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Meadville Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meadville Junction
- Meadville Junction is located in Crawford County
- Conneaut Lake
(4 miles [6.4 km] to the southwest)
- West Vernon
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for West Vernon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Vernon
- West Vernon is located in Crawford County
- Norrisville
(4 miles [6.4 km] to the north)
- Shermansville
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Shermansville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shermansville
- Shermansville is located in Crawford County
- Kerrtown
(5 miles [8 km] to the east)
- Coons Corners
(5 miles [8 km] to the northeast)
- Stony Point
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Stony Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stony Point
- Stony Point is located in Crawford County
- Geneva
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Geneva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Geneva
- Geneva is located in Crawford County
- Meadville
(6 miles [9.7 km] to the east)
- Rundell
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Rundell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rundell
- Rundell is located in Crawford County
- Mosiertown
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Mosiertown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mosiertown
- Mosiertown is located in Crawford County
- Conneautville
(8 miles [12.9 km] to the northwest)
- Linesville
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Linesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linesville
- Linesville is located in Crawford County
- Population from the 2020 Census: 965 people
- Jump to TripAdvisor's Tourism page for Linesville <3>
- Hickernell
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Hickernell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hickernell
- Hickernell is located in Crawford County
- Hartstown
(9 miles [14.5 km] to the southwest)
- Custards
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Custards have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Custards
- Custards is located in Crawford County
- Shaws Landing
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Shaws Landing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shaws Landing
- Shaws Landing is located in Crawford County
- Wayland
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Wayland. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wayland
- Wayland is located in Crawford County
- Google driving directions:
- From your current location to Wayland
- From Watson Run to Wayland
- Conneautville Station
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Conneautville Station have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conneautville Station
- Conneautville Station is located in Crawford County
- Adamsville
(11 miles [17.7 km] to the southwest)
- Atlantic
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Atlantic have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atlantic
- Atlantic is located in Crawford County
- Blooming Valley
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Blooming Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blooming Valley
- Blooming Valley is located in Crawford County
- Population from the 2020 Census: 311 people
- Springboro
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Springboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springboro
- Springboro is located in Crawford County
- Population from the 2020 Census: 444 people
- Jump to TripAdvisor's Tourism page for Springboro <3>
- Woodcock
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Woodcock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodcock
- Woodcock is located in Crawford County
- Population from the 2020 Census: 147 people
- Venango
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Venango have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Venango
- Venango is located in Crawford County
- Population from the 2020 Census: 247 people
- Jump to TripAdvisor's Tourism page for Venango <3>
- Palmer
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Palmer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Palmer
- Palmer is located in Crawford County
Off-the-Road Links ...
The official website for Crawford County: www.co.crawford.pa.us/
The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Watson Run, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |