Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Walcksville in the Atlas, the following communities of the 1890's would have been found near the current location of Walcksville. The following communities are listed based on their distance, with the one closest to Walcksville listed first.
- Harrity
(2 miles [3.2 km] to the south)
- Harrity is located in Carbon County
- Jump to our Gazetteer entry for Harrity
- Beltzville
(2 miles [3.2 km] to the southeast)
- Beltzville is located in Carbon County
- Jump to our Gazetteer entry for Beltzville
- Stemlersville
(2 miles [3.2 km] to the southeast)
- Stemlersville is located in Carbon County
- Jump to our Gazetteer entry for Stemlersville
- Packerton
(3 miles [4.8 km] to the west)
- Packerton is located in Carbon County
- Jump to our Gazetteer entry for Packerton
- Lehighton
(3 miles [4.8 km] to the southwest)
- Weissport
(3 miles [4.8 km] to the southwest)
- Parryville
(3 miles [4.8 km] to the south)
- Jim Thorpe
(4 miles [6.4 km] to the west)
- Jim Thorpe is located in Carbon County
- Jump to our Gazetteer entry for Jim Thorpe
- Population from the 2020 Census: 4,650 people
- Former names for Jim Thorpe:
- East Mauch Chunk
- Mauch Chunk
- Jump to TripAdvisor's Tourism page for Jim Thorpe <2>
- Lizard Creek Junction
(5 miles [8 km] to the south)
- Kittatinny
(5 miles [8 km] to the south)
- Kittatinny is located in Carbon County
- Jump to our Gazetteer entry for Kittatinny
- Hazard
(5 miles [8 km] to the south)
- Hazard is located in Carbon County
- Jump to our Gazetteer entry for Hazard
- Aquashicola
(5 miles [8 km] to the southeast)
- Aquashicola is located in Carbon County
- Jump to our Gazetteer entry for Aquashicola
- Nesquehoning Junction
(5 miles [8 km] to the west)
- Ashfield
(6 miles [9.7 km] to the southwest)
- Ashfield is located in Carbon County
- Jump to our Gazetteer entry for Ashfield
- Balliet
(6 miles [9.7 km] to the southwest)
- Balliet is located in Carbon County
- Jump to our Gazetteer entry for Balliet
- Drakes Creek
(7 miles [11.3 km] to the northwest)
- Drakes Creek is located in Carbon County
- Jump to our Gazetteer entry for Drakes Creek
- Little Gap
(7 miles [11.3 km] to the east)
- Little Gap is located in Carbon County
- Jump to our Gazetteer entry for Little Gap
- Penn Haven Junction
(7 miles [11.3 km] to the northwest)
- Penn Haven Junction is located in Carbon County
- Jump to our Gazetteer entry for Penn Haven Junction
- Germans
(8 miles [12.9 km] to the southwest)
- Germans is located in Carbon County
- Jump to our Gazetteer entry for Germans
- Slatedale
(8 miles [12.9 km] to the south)
- Slatedale is located in Lehigh County
- Jump to our Gazetteer entry for Slatedale
- Custer
(8 miles [12.9 km] to the south)
- Custer is located in Lehigh County
- Jump to our Gazetteer entry for Custer
- Emerald
(8 miles [12.9 km] to the south)
- Emerald is located in Lehigh County
- Jump to our Gazetteer entry for Emerald
- Slatington
(8 miles [12.9 km] to the south)
- Mud Run
(8 miles [12.9 km] to the north)
- Mud Run is located in Carbon County
- Jump to our Gazetteer entry for Mud Run
- Slate Valley
(8 miles [12.9 km] to the southeast)
- Slate Valley is located in Northampton County
- Jump to our Gazetteer entry for Slate Valley
- Berlinsville
(8 miles [12.9 km] to the southeast)
- Berlinsville is located in Northampton County
- Jump to our Gazetteer entry for Berlinsville
- Harpers
(8 miles [12.9 km] to the southeast)
- Harpers is located in Northampton County
- Jump to our Gazetteer entry for Harpers
- Danielsville
(8 miles [12.9 km] to the southeast)
- Kresgeville
(8 miles [12.9 km] to the east)
- Rockport
(8 miles [12.9 km] to the northwest)
- Rockport is located in Carbon County
- Jump to our Gazetteer entry for Rockport
- Nesquehoning
(8 miles [12.9 km] to the west)
- Summit Hill
(8 miles [12.9 km] to the west)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Walcksville, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |