Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Rayne in the Atlas, the following communities of the 1890's would have been found near the current location of Rayne. The following communities are listed based on their distance, with the one closest to Rayne listed first.
- Dixonville
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Dixonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dixonville
- Dixonville is located in Indiana County
- Tanoma
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Tanoma. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tanoma
- Tanoma is located in Indiana County
- Google driving directions:
- From your current location to Tanoma
- From Rayne to Tanoma
- Marion Center
(2 miles [3.2 km] to the northwest)
- Deckers Point
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Deckers Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deckers Point
- Deckers Point is located in Indiana County
- Home
(3 miles [4.8 km] to the west)
- Gilpin
(4 miles [6.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Gilpin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gilpin
- Gilpin is located in Indiana County
- Google driving directions:
- From your current location to Gilpin
- From Rayne to Gilpin
- Ambrose
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Ambrose. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ambrose
- Ambrose is located in Indiana County
- Google driving directions:
- From your current location to Ambrose
- From Rayne to Ambrose
- Onberg
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Onberg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Onberg
- Onberg is located in Indiana County
- Purchase Line
(5 miles [8 km] to the east)
- Kimmel
(6 miles [9.7 km] to the west)
- Cookport
(6 miles [9.7 km] to the southeast)
- Rochester Mills
(6 miles [9.7 km] to the northeast)
- Elkin
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Elkin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elkin
- Elkin is located in Indiana County
- Google driving directions:
- From your current location to Elkin
- From Rayne to Elkin
- Davis
(6 miles [9.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Davis. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Davis
- Davis is located in Indiana County
- Google driving directions:
- From your current location to Davis
- From Rayne to Davis
- Chambersville
(7 miles [11.3 km] to the west)
- Kenwood
(7 miles [11.3 km] to the southeast)
- Pine Flats
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Pine Flats. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Pine Flats
- Pine Flats is located in Indiana County
- Google driving directions:
- From your current location to Pine Flats
- From Rayne to Pine Flats
- Georgeville
(7 miles [11.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Georgeville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Georgeville
- Georgeville is located in Indiana County
- Google driving directions:
- From your current location to Georgeville
- From Rayne to Georgeville
- Hillsdale
(7 miles [11.3 km] to the east)
- Plumville
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Plumville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plumville
- Plumville is located in Indiana County
- Population from the 2020 Census: 286 people
- Creekside
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Creekside have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Creekside
- Creekside is located in Indiana County
- Population from the 2020 Census: 288 people
- Penn Run
(8 miles [12.9 km] to the south)
- Marchand
(8 miles [12.9 km] to the north)
- Trade City
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Trade City. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Trade City
- Trade City is located in Indiana County
- Google driving directions:
- From your current location to Trade City
- From Rayne to Trade City
- Pikes Peak
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Pikes Peak have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pikes Peak
- Pikes Peak is located in Indiana County
- Spruce
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Spruce have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spruce
- Spruce is located in Indiana County
- Cush Creek
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Cush Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cush Creek
- Cush Creek is located in Indiana County
- Covode
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Covode have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Covode
- Covode is located in Indiana County
- Willet
(9 miles [14.5 km] to the west)
Off-the-Road Links ...
The official website for Indiana County: www.countyofindiana.org/
The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rayne, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |