RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Pennsylvania >> Bedford County >> Jackson Mills >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Pennsylvania


The Commemorative Quarter for Pennsylvania







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Jackson Mills, we use the following websites to find information relevant to Jackson Mills and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Jackson Mills:
    • 39.972029, -78.271124
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Jackson Mills
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Jackson Mills ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Crystal Spring
    (2 miles [3.2 km] to the southeast)
    • Jump to our Gazetteer entry for Crystal Spring
    • Crystal Spring is located in Fulton County
  • Emmaville
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for Emmaville
    • Emmaville is located in Fulton County
  • Everett
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Everett have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Everett
    • Everett is located in Bedford County
    • Population from the 2020 Census: 1,717 people
    • Jump to TripAdvisor's Tourism page for Everett <2>
  • Gapsville
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Gapsville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gapsville
    • Gapsville is located in Bedford County
  • Graceville
    (5 miles [8 km] to the north)
    • Jump to our Gazetteer entry for Graceville
    • Graceville is located in Bedford County
  • Hopewell
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Hopewell have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hopewell
    • Hopewell is located in Bedford County
    • Population from the 2020 Census: 236 people
    • Jump to TripAdvisor's Tourism page for Hopewell <2>
  • Mattie
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for Mattie have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mattie
    • Mattie is located in Bedford County
  • Old Mountain House
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Old Mountain House have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Mountain House
    • Old Mountain House is located in Fulton County
  • Shortys Place
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Shortys Place have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shortys Place
    • Shortys Place is located in Fulton County
  • Valley-Hi
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Valley-Hi have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Valley-Hi
    • Valley-Hi is located in Fulton County
    • Population from the 2020 Census: 15 people

How Far From Jackson Mills to ...

We spend a lot of time looking through Gazetteers, Almanacs & Directories that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Jackson Mills to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<3> beginning in Jackson Mills and extending to:

  • Bedford, which is the Seat of Bedford County, lies 11 miles [17.7 km]<3> to the west. If you could walk a straight line from Jackson Mills to Bedford, with an average speed<4> of 2.2 miles [3.5 km] per hour, it would take five to six hours to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take nearly four hours.
  • Harrisburg, which is the State Capital of Pennsylvania, lies 76 miles [122.3 km] to the east northeast (ENE). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than two hours, a buggy would take most of three days and walking would take 5 days.
  • The White House (Washington, DC) is 99 miles [159.3 km] to the southeast (SE). Driving would take less than two hours, a buggy would take three full days and walking would take 6 days.
  • The shortest distance<5> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 5,903 miles [9,500 km] and it lies to the northeast (NE).<6>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,616 miles [10,647.4 km] and it lies to the northeast (NE).<7>
  • The distance to Saint Peter's Basilica (The Vatican) is 4,491 miles [7,227.6 km] and it lies to the northeast (NE).<8>

Unfortunately, we don't know of a website for Jackson Mills. If you can help, please contact us through our Feedback Page.

The official website for State of Pennsylvania: https://www.pa.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Jackson Mills) to Point B.Our distance measurements begin at a specific point in Jackson Mills. The point we use is located at these GPS coordinates - Latitude: 39.9720, Longitude: -78.2711       In this case, the coordinates for Jackson Mills have been provided by the Geographic Names Information System (GNIS).
<4>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<5>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Jackson Mills to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<6>The calculated bearing (or angle) to Jerusalem is 308.56 degrees.
<7>The calculated bearing (or angle) to Mecca is 304.365 degrees.
<8>The calculated bearing (or angle) to the Vatican is 304.832 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024