Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Temple B'nai B'rith Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Temple B'nai B'rith Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Temple B'nai B'rith Cemetery. We've listed the following communities based on their distance, with the closest first.

Ashley
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for Ashley
- Ashley is located in Luzerne County
- Population from the 2020 Census: 2,734 people
- Jump to TripAdvisor's Tourism page for Ashley <2>
- Google driving directions:
- From your current location to Ashley
- From the Temple B'nai B'rith Cemetery to Ashley
Plymouth
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for Plymouth
- Plymouth is located in Luzerne County
- Population from the 2020 Census: 5,752 people
- Jump to TripAdvisor's Tourism page for Plymouth <2>
- Google driving directions:
- From your current location to Plymouth
- From the Temple B'nai B'rith Cemetery to Plymouth
Larksville
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Larksville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Larksville
- Larksville is located in Luzerne County
- Population from the 2020 Census: 4,395 people
- Jump to TripAdvisor's Tourism page for Larksville <2>
Sugar Notch
(2 miles [3.2 km] to the south)
- Note: The GPS coordinates that we are using for Sugar Notch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sugar Notch
- Sugar Notch is located in Luzerne County
- Population from the 2020 Census: 959 people
Wilkes-Barre
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for Wilkes-Barre
- Wilkes-Barre is located in Luzerne County
- Population from the 2020 Census: 40,597 people
- Jump to TripAdvisor's Tourism page for Wilkes-Barre <2>
- Google driving directions:
- From your current location to Wilkes-Barre
- From the Temple B'nai B'rith Cemetery to Wilkes-Barre
Kingston
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for Kingston
- Kingston is located in Luzerne County
- Population from the 2020 Census: 12,787 people
- Jump to TripAdvisor's Tourism page for Kingston <2>
- Google driving directions:
- From your current location to Kingston
- From the Temple B'nai B'rith Cemetery to Kingston
Edwardsville
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Edwardsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edwardsville
- Edwardsville is located in Luzerne County
- Population from the 2020 Census: 4,738 people
- Jump to TripAdvisor's Tourism page for Edwardsville <2>
Warrior Run
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Warrior Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warrior Run
- Warrior Run is located in Luzerne County
- Population from the 2020 Census: 550 people
Laurel Run
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for Laurel Run
- Laurel Run is located in Luzerne County
- Population from the 2020 Census: 518 people
- Jump to TripAdvisor's Tourism page for Laurel Run <2>
- Google driving directions:
- From your current location to Laurel Run
- From the Temple B'nai B'rith Cemetery to Laurel Run
Forty Fort
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Forty Fort. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Forty Fort
- Forty Fort is located in Luzerne County
- Population from the 2020 Census: 4,025 people
- Google driving directions:
- From your current location to Forty Fort
- From the Temple B'nai B'rith Cemetery to Forty Fort
Pringle
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Pringle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pringle
- Pringle is located in Luzerne County
- Population from the 2020 Census: 913 people
Nanticoke
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Nanticoke
- Nanticoke is located in Luzerne County
- Population from the 2020 Census: 10,278 people
- Jump to TripAdvisor's Tourism page for Nanticoke <2>
- Google driving directions:
- From your current location to Nanticoke
- From the Temple B'nai B'rith Cemetery to Nanticoke
Concrete City ‑ Historic
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Concrete City
- Concrete City is located in Luzerne County
- Google driving directions:
- From your current location to Concrete City
- From the Temple B'nai B'rith Cemetery to Concrete City
Mountain Top
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Mountain Top have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountain Top
- Mountain Top is located in Luzerne County
- Jump to TripAdvisor's Tourism page for Mountain Top <2>
Plains
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for Plains
- Plains is located in Luzerne County
- Jump to TripAdvisor's Tourism page for Plains <2>
- Google driving directions:
- From your current location to Plains
- From the Temple B'nai B'rith Cemetery to Plains
Port Bowkley
(4 miles [6.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Port Bowkley. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Port Bowkley
- Port Bowkley is located in Luzerne County
- Google driving directions:
- From your current location to Port Bowkley
- From the Temple B'nai B'rith Cemetery to Port Bowkley
Luzerne
(4 miles [6.4 km] to the north)
- Jump to our Gazetteer entry for Luzerne
- Luzerne is located in Luzerne County
- Population from the 2020 Census: 2,802 people
- Jump to TripAdvisor's Tourism page for Luzerne <2>
- Google driving directions:
- From your current location to Luzerne
- From the Temple B'nai B'rith Cemetery to Luzerne
Courtdale
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Courtdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Courtdale
- Courtdale is located in Luzerne County
- Population from the 2020 Census: 711 people
Miners Mills
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for Miners Mills
- Miners Mills is located in Luzerne County
- Google driving directions:
- From your current location to Miners Mills
- From the Temple B'nai B'rith Cemetery to Miners Mills
Swoyersville
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for Swoyersville
- Swoyersville is located in Luzerne County
- Population from the 2020 Census: 5,010 people
- Jump to TripAdvisor's Tourism page for Swoyersville <2>
- Google driving directions:
- From your current location to Swoyersville
- From the Temple B'nai B'rith Cemetery to Swoyersville
Trucksville
(5 miles [8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Trucksville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Trucksville
- Trucksville is located in Luzerne County
- Google driving directions:
- From your current location to Trucksville
- From the Temple B'nai B'rith Cemetery to Trucksville
Glen Summit
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Glen Summit. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Glen Summit
- Glen Summit is located in Luzerne County
- Google driving directions:
- From your current location to Glen Summit
- From the Temple B'nai B'rith Cemetery to Glen Summit
Hilldale
(6 miles [9.7 km] to the northeast)
- Jump to our Gazetteer entry for Hilldale
- Hilldale is located in Luzerne County
- Google driving directions:
- From your current location to Hilldale
- From the Temple B'nai B'rith Cemetery to Hilldale
Port Blanchard
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Port Blanchard. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Port Blanchard
- Port Blanchard is located in Luzerne County
- Google driving directions:
- From your current location to Port Blanchard
- From the Temple B'nai B'rith Cemetery to Port Blanchard
Hunlock Creek
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Hunlock Creek
- Hunlock Creek is located in Luzerne County
- Jump to TripAdvisor's Tourism page for Hunlock Creek <2>
- Google driving directions:
- From your current location to Hunlock Creek
- From the Temple B'nai B'rith Cemetery to Hunlock Creek
Wanamie
(7 miles [11.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Wanamie. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wanamie
- Wanamie is located in Luzerne County
- Google driving directions:
- From your current location to Wanamie
- From the Temple B'nai B'rith Cemetery to Wanamie
Slocum Corners
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Slocum Corners
- Slocum Corners is located in Luzerne County
- Google driving directions:
- From your current location to Slocum Corners
- From the Temple B'nai B'rith Cemetery to Slocum Corners
Albert
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Albert
- Albert is located in Luzerne County
- Google driving directions:
- From your current location to Albert
- From the Temple B'nai B'rith Cemetery to Albert
Dallas
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for Dallas
- Dallas is located in Luzerne County
- Population from the 2020 Census: 2,762 people
- Jump to TripAdvisor's Tourism page for Dallas <2>
- Google driving directions:
- From your current location to Dallas
- From the Temple B'nai B'rith Cemetery to Dallas
Laflin
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Laflin
- Laflin is located in Luzerne County
- Population from the 2020 Census: 1,435 people
- Google driving directions:
- From your current location to Laflin
- From the Temple B'nai B'rith Cemetery to Laflin
Wyoming
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Wyoming have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wyoming
- Wyoming is located in Luzerne County
- Population from the 2020 Census: 3,004 people
- Jump to TripAdvisor's Tourism page for Wyoming <2>
West Wyoming
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for West Wyoming have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Wyoming
- West Wyoming is located in Luzerne County
- Population from the 2020 Census: 2,671 people

Off-the-Road Links ...

The official website for Luzerne County: www.luzernecounty.org/

The official website for Commonwealth of Pennsylvania: https://www.pa.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Temple B'nai B'rith Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.2277, Longitude: -75.9164
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.