RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Pennsylvania >> Venango County >> Breedtown >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Pennsylvania

The Commemorative Quarter for Pennsylvania





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Breedtown (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Breedtown. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Breedtown is located in Venango County.

To see how the shape of Pennsylvania's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Venango County: Butler, Clarion, Crawford, Forest, Mercer & Warren.

Below are the counties that are near Breedtown. For each of these counties, we show a sample of those communities that are closest to Breedtown:

  • Venango County     (The home county of Breedtown)
    • The following are listed by their distance from Breedtown, with the one closest to Breedtown listed first.
    • Petroleum Center
      (5 miles [8 km] to the south)
      • Note: The GPS coordinates that we are using for Petroleum Center have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Petroleum Center
      • Petroleum Center is located in Venango County
    • Pleasantville
      (6 miles [9.7 km] to the east)
    • Plumer
      (7 miles [11.3 km] to the southeast)
      • Jump to our Gazetteer entry for Plumer
      • Plumer is located in Venango County
    • Rouseville
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Rouseville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rouseville
      • Rouseville is located in Venango County
      • Population from the 2020 Census: 468 people
      • Jump to TripAdvisor's Tourism page for Rouseville <2>
    • Pithole City
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Pithole City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pithole City
      • Pithole City is located in Venango County
    • McClintock
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for McClintock have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McClintock
      • McClintock is located in Venango County
    • Colonial Village
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colonial Village
      • Colonial Village is located in Venango County
    • Hasson Heights
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Hasson Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hasson Heights
      • Hasson Heights is located in Venango County
    • Cooperstown
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Cooperstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cooperstown
      • Cooperstown is located in Venango County
      • Population from the 2020 Census: 417 people
    • Oil City
      (11 miles [17.7 km] to the south)
    • Wilson Mills
      (11 miles [17.7 km] to the west)
      • Jump to our Gazetteer entry for Wilson Mills
      • Wilson Mills is located in Venango County
    • President
      (12 miles [19.3 km] to the southeast)
      • Jump to our Gazetteer entry for President
      • President is located in Venango County
  • Butler County
    • Cherry Valley
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Cherry Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cherry Valley
      • Cherry Valley is located in Butler County
      • Population from the 2020 Census: 62 people
  • Clarion County
    • The following are listed by their distance from Breedtown, with the one closest to Breedtown listed first.
    • Venus
      (20 miles [32.2 km] to the southeast)
      • Jump to our Gazetteer entry for Venus
      • Venus is located in Clarion County
    • Wolfs Corners
      (20 miles [32.2 km] to the southeast)
      • Jump to our Gazetteer entry for Wolfs Corners
      • Wolfs Corners is located in Clarion County
    • Fryburg
      (22 miles [35.4 km] to the southeast)
    • Pine City
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Pine City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine City
      • Pine City is located in Clarion County
    • Iron City
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Iron City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Iron City
      • Iron City is located in Clarion County
    • Knox
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Knox have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Knox
      • Knox is located in Clarion County
      • Population from the 2020 Census: 1,067 people
      • Jump to TripAdvisor's Tourism page for Knox <2>
    • Lamartine
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for Lamartine
      • Lamartine is located in Clarion County
    • Elk City
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Elk City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elk City
      • Elk City is located in Clarion County
    • Leeper
      (26 miles [41.8 km] to the southeast)
    • Beaver City
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Beaver City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaver City
      • Beaver City is located in Clarion County
    • Crown
      (27 miles [43.5 km] to the southeast)
      • Jump to our Gazetteer entry for Crown
      • Crown is located in Clarion County
    • Shippenville
      (27 miles [43.5 km] to the southeast)
  • Crawford County
    • The following are listed by their distance from Breedtown, with the one closest to Breedtown listed first.
    • Gresham
      (Less than 2 miles to the northwest)
      • Jump to our Gazetteer entry for Gresham
      • Gresham is located in Crawford County
    • Titusville
      (2 miles [3.2 km] to the northeast)
    • Hydetown
      (3 miles [4.8 km] to the north)
      • Jump to our Gazetteer entry for Hydetown
      • Hydetown is located in Crawford County
      • Population from the 2020 Census: 504 people
    • Fauncetown
      (7 miles [11.3 km] to the west)
      • Jump to our Gazetteer entry for Fauncetown
      • Fauncetown is located in Crawford County
    • Tryonville
      (8 miles [12.9 km] to the northwest)
      • Jump to our Gazetteer entry for Tryonville
      • Tryonville is located in Crawford County
    • Centerville
      (9 miles [14.5 km] to the north)
      • Note: The GPS coordinates that we are using for Centerville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Centerville
      • Centerville is located in Crawford County
      • Population from the 2020 Census: 202 people
      • Jump to TripAdvisor's Tourism page for Centerville <2>
    • Black Ash
      (9 miles [14.5 km] to the west)
      • Note: The GPS coordinates that we are using for Black Ash have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Black Ash
      • Black Ash is located in Crawford County
    • Townville
      (10 miles [16.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Townville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Townville
      • Townville is located in Crawford County
      • Population from the 2020 Census: 306 people
    • Riceville
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Riceville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Riceville
      • Riceville is located in Crawford County
    • Lincolnville
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Lincolnville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lincolnville
      • Lincolnville is located in Crawford County
    • Rootville
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Rootville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rootville
      • Rootville is located in Crawford County
    • Guys Mills
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Guys Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Guys Mills
      • Guys Mills is located in Crawford County
      • Jump to TripAdvisor's Tourism page for Guys Mills <2>
  • Erie County
    • The following are listed by their distance from Breedtown, with the one closest to Breedtown listed first.
    • Elgin
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Elgin
      • Elgin is located in Erie County
      • Population from the 2020 Census: 204 people
    • Union City
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Union City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Union City
      • Union City is located in Erie County
      • Population from the 2020 Census: 3,097 people
      • Jump to TripAdvisor's Tourism page for Union City <2>
    • Beaver Dam
      (22 miles [35.4 km] to the north)
      • Jump to our Gazetteer entry for Beaver Dam
      • Beaver Dam is located in Erie County
    • Corry
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Corry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Corry
      • Corry is located in Erie County
      • Population from the 2020 Census: 6,180 people
      • Jump to TripAdvisor's Tourism page for Corry <2>
    • Mill Village
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Mill Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mill Village
      • Mill Village is located in Erie County
      • Population from the 2020 Census: 383 people
    • LeBoeuf Garden
      (26 miles [41.8 km] to the northwest)
      • Jump to our Gazetteer entry for LeBoeuf Garden
      • LeBoeuf Garden is located in Erie County
    • Wattsburg
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Wattsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wattsburg
      • Wattsburg is located in Erie County
      • Population from the 2020 Census: 381 people
      • Jump to TripAdvisor's Tourism page for Wattsburg <2>
    • Waterford
      (27 miles [43.5 km] to the northwest)
    • Edinboro
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Edinboro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Edinboro
      • Edinboro is located in Erie County
      • Population from the 2020 Census: 5,405 people
      • Jump to TripAdvisor's Tourism page for Edinboro <2>
  • Forest County
    • The following are listed by their distance from Breedtown, with the one closest to Breedtown listed first.
    • Fagundus
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Fagundus have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fagundus
      • Fagundus is located in Forest County
    • Tionesta
      (14 miles [22.5 km] to the southeast)
    • Gilfoyle
      (29 miles [46.7 km] to the east)
      • Jump to our Gazetteer entry for Gilfoyle
      • Gilfoyle is located in Forest County
    • Roses
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Roses have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roses
      • Roses is located in Forest County
  • Mercer County
    • The following are listed by their distance from Breedtown, with the one closest to Breedtown listed first.
    • Milledgeville
      (20 miles [32.2 km] to the southwest)
      • Jump to our Gazetteer entry for Milledgeville
      • Milledgeville is located in Mercer County
    • New Lebanon
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for New Lebanon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Lebanon
      • New Lebanon is located in Mercer County
      • Population from the 2020 Census: 170 people
    • New Vernon
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for New Vernon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Vernon
      • New Vernon is located in Mercer County
    • Sandy Lake
      (25 miles [40.2 km] to the southwest)
    • Kilgore
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Kilgore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kilgore
      • Kilgore is located in Mercer County
    • Sheakleyville
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for Sheakleyville
      • Sheakleyville is located in Mercer County
      • Population from the 2020 Census: 134 people
    • Stoneboro
      (27 miles [43.5 km] to the southwest)
    • Clarks Mills
      (28 miles [45.1 km] to the southwest)
      • Jump to our Gazetteer entry for Clarks Mills
      • Clarks Mills is located in Mercer County
    • Perrine Corners
      (28 miles [45.1 km] to the southwest)
      • Jump to our Gazetteer entry for Perrine Corners
      • Perrine Corners is located in Mercer County
    • Hadley
      (30 miles [48.3 km] to the southwest)
  • Warren County
    • The following are listed by their distance from Breedtown, with the one closest to Breedtown listed first.
    • Enterprise
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Enterprise have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Enterprise
      • Enterprise is located in Warren County
    • Sanford
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Sanford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sanford
      • Sanford is located in Warren County
    • Tidioute
      (16 miles [25.7 km] to the east)
    • West Spring Creek
      (18 miles [29 km] to the north)
      • Jump to our Gazetteer entry for West Spring Creek
      • West Spring Creek is located in Warren County
    • Garland
      (20 miles [32.2 km] to the northeast)
      • Jump to our Gazetteer entry for Garland
      • Garland is located in Warren County
    • Colza
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Colza have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colza
      • Colza is located in Warren County
    • Pittsfield
      (23 miles [37 km] to the northeast)
    • Columbus
      (24 miles [38.6 km] to the north)
    • Youngsville
      (26 miles [41.8 km] to the northeast)
    • Hermit Spring
      (27 miles [43.5 km] to the east)
      • Jump to our Gazetteer entry for Hermit Spring
      • Hermit Spring is located in Warren County
    • Irvine
      (28 miles [45.1 km] to the northeast)
    • Bear Lake
      (29 miles [46.7 km] to the north)

For an expanded list of the communities that are closest to Breedtown, see our County-by-County Page for Breedtown.

Newspapers Published in Breedtown ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 108 newspapers that have been published in the area around Breedtown.

Although we're unaware of any newspapers that were published in the immediate area of Breedtown, there are papers which were published within 18 miles [29 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Breedtown.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Breedtown:

Cemeteries Near Breedtown ...

Below are cemeteries that are in the vicinity of Breedtown.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Breedtown covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Breedtown, with the one closest to Breedtown listed first.

  • Woodlawn Cemetery
    (2 miles [3.2 km] to the north)
  • Greenwood Cemetery
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for the Greenwood Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Greenwood Cemetery
  • Fairview Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fairview Cemetery
  • East Troy Cemetery
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the East Troy Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the East Troy Cemetery
  • St. Catharine's RC Cemetery
    (3 miles [4.8 km] to the north)
  • Titus Cemetery
    (4 miles [6.4 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for the Titus Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<5>
    • To give a relative sense of its location, the Titus Cemetery is located in Hydetown.
    • Jump to our Gazetteer entry for the Titus Cemetery
    • Jump to Find-A-Grave: FG ID #2188955 <4>
  • St. Stephens Cemetery
    (4 miles [6.4 km] to the northeast)
  • Curry Cemetery
    (4 miles [6.4 km] to the north)
    • To give a relative sense of its location, the Curry Cemetery is located 2 miles [3.2 km]<3> to the south of Titusville.
    • Jump to our Gazetteer entry for the Curry Cemetery
  • Jerusalem Corners Cemetery
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for the Jerusalem Corners Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Jerusalem Corners Cemetery
  • Union Cemetery
    (5 miles [8 km] to the northeast)
    • The Union Cemetery has also been known as:
    • Henderson Cemetery
    • Jump to our Gazetteer entry for the Union Cemetery
  • Gilson Ridge Cemetery
    (5 miles [8 km] to the north)
  • Memory's Acre Cemetery
    (6 miles [9.7 km] to the east)
    • To give a relative sense of its location, the Memory's Acre Cemetery is located in Pleasantville.
    • The Memory's Acre Cemetery has also been known as:
    • Pleasantville Cemetery
    • Jump to our Gazetteer entry for the Memory's Acre Cemetery
  • Continue List   (159 more) ...
    • Lamey Cemetery
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for the Lamey Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Lamey Cemetery
    • Fairview Cemetery
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Fairview Cemetery
    • Concord Cemetery
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for the Concord Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Concord Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

While we didn't find Breedtown in the Atlas, the following 1895 communities would have been found near the current location of Breedtown.

These communities are listed based on their distance from Breedtown, with the one closest to Breedtown listed first.

  • Gresham
    (Less than 2 miles to the northwest)
    • Jump to our Gazetteer entry for Gresham
    • Gresham is located in Crawford County
  • Titusville
    (2 miles [3.2 km] to the northeast)
  • Hydetown
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for Hydetown
    • Hydetown is located in Crawford County
    • Population from the 2020 Census: 504 people
  • East Titusville
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for East Titusville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Titusville
    • East Titusville is located in Crawford County
  • Cherrytree
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Cherrytree have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cherrytree
    • Cherrytree is located in Venango County
  • Shamburg
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Shamburg have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shamburg
    • Shamburg is located in Venango County
  • Diamond
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Diamond have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Diamond
    • Diamond is located in Venango County
  • Wallaceville
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Wallaceville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wallaceville
    • Wallaceville is located in Venango County
  • Petroleum Center
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Petroleum Center have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Petroleum Center
    • Petroleum Center is located in Venango County
  • Pioneer
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Pioneer have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pioneer
    • Pioneer is located in Venango County
  • Pleasantville
    (6 miles [9.7 km] to the east)
  • Troy Center
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Troy Center have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Troy Center
    • Troy Center is located in Crawford County
  • Continue List   (15 more) ...
    • Sunville
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Sunville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sunville
      • Sunville is located in Venango County
    • Dempseytown
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Dempseytown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dempseytown
      • Dempseytown is located in Venango County
    • Plumer
      (7 miles [11.3 km] to the southeast)
      • Jump to our Gazetteer entry for Plumer
      • Plumer is located in Venango County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Breedtown. See our List of 1890's Communities around Breedtown.

Unfortunately, we don't know of a website for Breedtown. If you can help, please contact us through our Feedback Page.

The official website for Venango County: www.co.venango.pa.us/

The official website for State of Pennsylvania: https://www.pa.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Breedtown) to Point B.Our distance measurements begin at a specific point in Breedtown. The point we use is located at these GPS coordinates - Latitude: 41.6001, Longitude: -79.7078       In this case, the coordinates for Breedtown have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Breedtown, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024