|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Mount Pleasant in the Atlas, the following communities of the 1890's would have been found near the current location of Mount Pleasant. The following communities are listed based on their distance, with the one closest to Mount Pleasant listed first.
- Oregon City
(Less than 2 miles to the south)
- Canemah
(Less than 2 miles to the northwest)
- Park Place
(2 miles [3.2 km] to the northeast)
- New Era ‑ Historic
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for New Era have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Era
- New Era is located in Clackamas County
- Gladstone
(3 miles [4.8 km] to the north)
- Carus
(4 miles [6.4 km] to the south)
- Clackamas
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Clackamas have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clackamas
- Clackamas is located in Clackamas County
- Jump to TripAdvisor's Tourism page for Clackamas <2>
- Stafford
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Stafford. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stafford
- Stafford is located in Clackamas County
- Google driving directions:
- From your current location to Stafford
- From Mount Pleasant to Stafford
- Canby
(6 miles [9.7 km] to the southwest)
- Milwaukie
(7 miles [11.3 km] to the north)
- Sunnyside
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Sunnyside have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunnyside
- Sunnyside is located in Clackamas County
- Barlow
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Barlow. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Barlow
- Barlow is located in Clackamas County
- Population from the 2020 Census: 147 people
- Google driving directions:
- From your current location to Barlow
- From Mount Pleasant to Barlow
- Sellwood
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Sellwood have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sellwood
- Sellwood is located in Multnomah County
- Mulino
(8 miles [12.9 km] to the south)
- Logan
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Logan have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Logan
- Logan is located in Clackamas County
- Tualatin
(8 miles [12.9 km] to the west)
- Wilsonville
(8 miles [12.9 km] to the west)
- Macksburg
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Macksburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Macksburg
- Macksburg is located in Clackamas County
- Union Mills
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Union Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Mills
- Union Mills is located in Clackamas County
- Fulton ‑ Historic
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fulton
- Fulton is located in Multnomah County
- Viola
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Viola
- Viola is located in Clackamas County
- Woodstock
(9 miles [14.5 km] to the north)
- Damascus
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Damascus have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Damascus
- Damascus is located in Clackamas County
- Estimated population in 2017: 11,155 people
- Jump to TripAdvisor's Tourism page for Damascus <2>
- Lents
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Lents have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lents
- Lents is located in Multnomah County
- Aurora
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Aurora have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aurora
- Aurora is located in Marion County
- Population from the 2020 Census: 1,039 people
- Jump to TripAdvisor's Tourism page for Aurora <2>
- South Portland ‑ Historic
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for South Portland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Portland
- South Portland is located in Multnomah County
- Clarkes
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Clarkes have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkes
- Clarkes is located in Clackamas County
- Hillsdale
(10 miles [16.1 km] to the northwest)
- Bertha ‑ Historic
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Bertha have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bertha
- Bertha is located in Multnomah County
- Sycamore
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Sycamore have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sycamore
- Sycamore is located in Multnomah County
- West Portland
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for West Portland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Portland
- West Portland is located in Multnomah County
Off-the-Road Links ...
The official website for Clackamas County: www.co.clackamas.or.us/ The official website for State of Oregon: https://www.oregon.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mount Pleasant, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|