TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Lindsay. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Lindsay.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Lindsay - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 33 communities listed:
- Alex
(11 miles [17.7 km] to the northwest)
- Amber
(27 miles [43.5 km] to the northwest)
- Blanchard
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Blanchard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blanchard
- Blanchard is located in McClain County
- Population from the 2020 Census: 9,114 people
- Jump to TripAdvisor's Tourism page for Blanchard <2>
- Bradley
(6 miles [9.7 km] to the northwest)
- Bray
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Bray have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bray
- Bray is located in Stephens County
- Population from the 2020 Census: 1,178 people
- Jump to TripAdvisor's Tourism page for Bray <2>
- Cement
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Cement have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cement
- Cement is located in Caddo County
- Population from the 2020 Census: 471 people
- Jump to TripAdvisor's Tourism page for Cement <2>
- Chickasha
(23 miles [37 km] to the northwest)
- Countyline
(26 miles [41.8 km] to the south)
- Dibble
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Dibble have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dibble
- Dibble is located in McClain County
- Population from the 2020 Census: 878 people
- Jump to TripAdvisor's Tourism page for Dibble <2>
- Duncan
(30 miles [48.3 km] to the southwest)
- Elmore City
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Elmore City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elmore City
- Elmore City is located in Garvin County
- Population from the 2020 Census: 753 people
- Jump to TripAdvisor's Tourism page for Elmore City <2>
- Foster
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Foster have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Foster
- Foster is located in Garvin County
- Population from the 2020 Census: 161 people
- Jump to TripAdvisor's Tourism page for Foster <2>
- Goldsby
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Goldsby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goldsby
- Goldsby is located in McClain County
- Population from the 2020 Census: 2,536 people
- Jump to TripAdvisor's Tourism page for Goldsby <2>
- Hennepin
(26 miles [41.8 km] to the southeast)
- Lexington
(19 miles [30.6 km] to the northeast)
- Marlow
(23 miles [37 km] to the southwest)
- Maysville
(11 miles [17.7 km] to the east)
- Newcastle
(28 miles [45.1 km] to the north)
- Ninnekah
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Ninnekah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ninnekah
- Ninnekah is located in Grady County
- Population from the 2020 Census: 1,042 people
- Jump to TripAdvisor's Tourism page for Ninnekah <2>
- Noble
(24 miles [38.6 km] to the northeast)
- Norman
(28 miles [45.1 km] to the north)
- Paoli
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Paoli have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Paoli
- Paoli is located in Garvin County
- Population from the 2020 Census: 612 people
- Jump to TripAdvisor's Tourism page for Paoli <2>
- Pauls Valley
(22 miles [35.4 km] to the east)
- Pernell
(19 miles [30.6 km] to the south)
- Purcell
(18 miles [29 km] to the northeast)
- Ratliff City
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Ratliff City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ratliff City
- Ratliff City is located in Carter County
- Population from the 2020 Census: 117 people
- Jump to TripAdvisor's Tourism page for Ratliff City <2>
- Rush Springs
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Rush Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rush Springs
- Rush Springs is located in Grady County
- Population from the 2020 Census: 1,252 people
- Jump to TripAdvisor's Tourism page for Rush Springs <2>
- Tatums
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Tatums have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tatums
- Tatums is located in Carter County
- Population from the 2020 Census: 149 people
- Jump to TripAdvisor's Tourism page for Tatums <2>
- Tussy
(23 miles [37 km] to the south)
- Velma
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Velma have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Velma
- Velma is located in Stephens County
- Population from the 2020 Census: 595 people
- Jump to TripAdvisor's Tourism page for Velma <2>
- Washington
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Washington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Washington
- Washington is located in McClain County
- Population from the 2020 Census: 601 people
- Jump to TripAdvisor's Tourism page for Washington <2>
- Wayne
(17 miles [27.4 km] to the east)
- Wynnewood
(28 miles [45.1 km] to the southeast)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Lindsay. If you can help, please contact us through our Feedback Page.
The official website for State of Oklahoma: https://www.ok.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Lindsay) to Point B.Our distance measurements begin at a specific point in Lindsay. The point we use is located at these GPS coordinates - Latitude: 34.8369, Longitude: -97.6070 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |