Our Genealogy Helper
Introduction ...
So far, we found very little information about Glenville. The little that we've found leads us believe that the community is historic.<1>
We've added Glenville to our Gazetteer with the hope that we can develop more information. If you can help us with Glenville, please Contact Us.
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Glenville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Glenville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Although our information shows that the community of Glenville is historic, it would have been located within present day Crawford County.
To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Crawford County: Huron, Marion, Morrow, Richland, Seneca & Wyandot.
Below are the counties that are near Glenville. For each of these counties, we show a sample of those communities that are closest to Glenville:
- Crawford County (The home county of Glenville)
- The following are listed by their distance from Glenville, with the one closest to Glenville listed first.
- Bucyrus
(3 miles [4.8 km] to the east)- Jump to our Gazetteer entry for Bucyrus
- Bucyrus is located in Crawford County
- Population from the 2020 Census: 11,738 people
- Jump to TripAdvisor's Tourism page for Bucyrus <2>
- Oceola
(3 miles [4.8 km] to the northwest)- Jump to our Gazetteer entry for Oceola
- Oceola is located in Crawford County
- Lemert
(5 miles [8 km] to the northwest)- Jump to our Gazetteer entry for Lemert
- Lemert is located in Crawford County
- Broken Sword
(6 miles [9.7 km] to the north)- Jump to our Gazetteer entry for Broken Sword
- Broken Sword is located in Crawford County
- Broken Sword has also been known as:
- Bloody Corners
- Porterville
- Wingarts Corners
- Wingert Corners
- Wingerts Corners
- Benton
(8 miles [12.9 km] to the north)- Jump to our Gazetteer entry for Benton
- Benton is located in Crawford County
- North Robinson
(10 miles [16.1 km] to the east)- Note: The GPS coordinates that we are using for North Robinson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Robinson
- North Robinson is located in Crawford County
- Population from the 2020 Census: 198 people
- Chatfield
(11 miles [17.7 km] to the northeast) - Leesville
(13 miles [20.9 km] to the east) - Galion
(14 miles [22.5 km] to the east)- Jump to our Gazetteer entry for Galion
- Galion is located in Crawford County
- Population from the 2020 Census: 9,929 people
- Jump to TripAdvisor's Tourism page for Galion <2>
- New Washington
(14 miles [22.5 km] to the northeast)- Note: The GPS coordinates that we are using for New Washington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Washington
- New Washington is located in Crawford County
- Population from the 2020 Census: 915 people
- Jump to TripAdvisor's Tourism page for New Washington <2>
- Crestline
(16 miles [25.7 km] to the east)- Jump to our Gazetteer entry for Crestline
- Crestline is located in Crawford County
- Population from the 2020 Census: 4,406 people
- Jump to TripAdvisor's Tourism page for Crestline <2>
- Tiro
(16 miles [25.7 km] to the northeast)- Note: The GPS coordinates that we are using for Tiro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tiro
- Tiro is located in Crawford County
- Population from the 2020 Census: 262 people
- Jump to TripAdvisor's Tourism page for Tiro <2>
- North Auburn
(17 miles [27.4 km] to the northeast)- Note: The GPS coordinates that we are using for North Auburn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Auburn
- North Auburn is located in Crawford County
- Delaware County
- The following are listed by their distance from Glenville, with the one closest to Glenville listed first.
- Norton
(26 miles [41.8 km] to the south)- Jump to our Gazetteer entry for Norton
- Norton is located in Delaware County
- Robertsburg ‑ Historic
(27 miles [43.5 km] to the south)- Note: The GPS coordinates that we are using for Robertsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Robertsburg
- Robertsburg is located in Delaware County
- Windsor Corners ‑ Historic
(27 miles [43.5 km] to the south)- Note: The GPS coordinates that we are using for Windsor Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windsor Corners
- Windsor Corners is located in Delaware County
- Ashley
(28 miles [45.1 km] to the south)- Jump to our Gazetteer entry for Ashley
- Ashley is located in Delaware County
- Population from the 2020 Census: 1,640 people
- Jump to TripAdvisor's Tourism page for Ashley <2>
- Inskeep Corners ‑ Historic
(28 miles [45.1 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Inskeep Corners. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Inskeep Corners
- Inskeep Corners is located in Delaware County
- Troyton ‑ Historic
(28 miles [45.1 km] to the south)- Jump to our Gazetteer entry for Troyton
- Troyton is located in Delaware County
- Kerr Corner
(29 miles [46.7 km] to the south)- Jump to our Gazetteer entry for Kerr Corner
- Kerr Corner is located in Delaware County
- Meredith
(29 miles [46.7 km] to the south)- Jump to our Gazetteer entry for Meredith
- Meredith is located in Delaware County
- Coles Mills ‑ Historic
(30 miles [48.3 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Coles Mills. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Coles Mills
- Coles Mills is located in Delaware County
- Radnor
(30 miles [48.3 km] to the south)
- Hancock County
- The following are listed by their distance from Glenville, with the one closest to Glenville listed first.
- Vanlue
(25 miles [40.2 km] to the northwest)- Jump to our Gazetteer entry for Vanlue
- Vanlue is located in Hancock County
- Population from the 2020 Census: 351 people
- West Independence
(27 miles [43.5 km] to the northwest)- Jump to our Gazetteer entry for West Independence
- West Independence is located in Hancock County
- Mount Blanchard
(27 miles [43.5 km] to the west)- Note: The GPS coordinates that we are using for Mount Blanchard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Blanchard
- Mount Blanchard is located in Hancock County
- Population from the 2020 Census: 478 people
- Jump to TripAdvisor's Tourism page for Mount Blanchard <2>
- Hardin County
- The following are listed by their distance from Glenville, with the one closest to Glenville listed first.
- Forest
(24 miles [38.6 km] to the west)- Note: The GPS coordinates that we are using for Forest have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest
- Forest is located in Hardin County
- Population from the 2020 Census: 1,444 people
- Jump to TripAdvisor's Tourism page for Forest <2>
- Patterson
(24 miles [38.6 km] to the west) - McVitty
(25 miles [40.2 km] to the west)- Jump to our Gazetteer entry for McVitty
- McVitty is located in Hardin County
- Pfeiffer
(26 miles [41.8 km] to the southwest)- Jump to our Gazetteer entry for Pfeiffer
- Pfeiffer is located in Hardin County
- Grant
(27 miles [43.5 km] to the west)- Jump to our Gazetteer entry for Grant
- Grant is located in Hardin County
- Huron County
- The following are listed by their distance from Glenville, with the one closest to Glenville listed first.
- Celeryville
(22 miles [35.4 km] to the northeast)- Jump to our Gazetteer entry for Celeryville
- Celeryville is located in Huron County
- Willard
(23 miles [37 km] to the northeast)- Jump to our Gazetteer entry for Willard
- Willard is located in Huron County
- Population from the 2020 Census: 5,988 people
- Jump to TripAdvisor's Tourism page for Willard <2>
- Coble Village
(24 miles [38.6 km] to the northeast)- Note: The GPS coordinates that we are using for Coble Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coble Village
- Coble Village is located in Huron County
- Delphi
(27 miles [43.5 km] to the northeast)- Jump to our Gazetteer entry for Delphi
- Delphi is located in Huron County
- Steuben
(27 miles [43.5 km] to the northeast)- Jump to our Gazetteer entry for Steuben
- Steuben is located in Huron County
- North Fairfield
(30 miles [48.3 km] to the northeast)- Note: The GPS coordinates that we are using for North Fairfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Fairfield
- North Fairfield is located in Huron County
- Population from the 2020 Census: 531 people
- Knox County
- Batemantown
(30 miles [48.3 km] to the southeast)- Jump to our Gazetteer entry for Batemantown
- Batemantown is located in Knox County
- Batemantown
- Marion County
- The following are listed by their distance from Glenville, with the one closest to Glenville listed first.
- Morral
(11 miles [17.7 km] to the southwest) - Caledonia
(12 miles [19.3 km] to the south)- Note: The GPS coordinates that we are using for Caledonia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caledonia
- Caledonia is located in Marion County
- Population from the 2020 Census: 560 people
- Jump to TripAdvisor's Tourism page for Caledonia <2>
- Martel
(12 miles [19.3 km] to the southeast)- Jump to our Gazetteer entry for Martel
- Martel is located in Marion County
- Ruth
(15 miles [24.1 km] to the southwest) - Marion
(16 miles [25.7 km] to the south)- Jump to our Gazetteer entry for Marion
- Marion is located in Marion County
- Population from the 2020 Census: 35,516 people
- Jump to TripAdvisor's Tourism page for Marion <2>
- New Bloomington
(20 miles [32.2 km] to the southwest)- Note: The GPS coordinates that we are using for New Bloomington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Bloomington
- New Bloomington is located in Marion County
- Population from the 2020 Census: 511 people
- Green Camp
(21 miles [33.8 km] to the south)- Note: The GPS coordinates that we are using for Green Camp have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green Camp
- Green Camp is located in Marion County
- Population from the 2020 Census: 356 people
- Newmans
(23 miles [37 km] to the south)- Jump to our Gazetteer entry for Newmans
- Newmans is located in Marion County
- La Rue
(23 miles [37 km] to the southwest) - Waldo
(24 miles [38.6 km] to the south)- Jump to our Gazetteer entry for Waldo
- Waldo is located in Marion County
- Population from the 2020 Census: 322 people
- Jump to TripAdvisor's Tourism page for Waldo <2>
- Prospect
(25 miles [40.2 km] to the south)- Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prospect
- Prospect is located in Marion County
- Population from the 2020 Census: 1,058 people
- Jump to TripAdvisor's Tourism page for Prospect <2>
- Morrow County
- The following are listed by their distance from Glenville, with the one closest to Glenville listed first.
- Iberia
(14 miles [22.5 km] to the southeast)- Jump to our Gazetteer entry for Iberia
- Iberia is located in Morrow County
- Blooming Grove
(18 miles [29 km] to the east)- Jump to our Gazetteer entry for Blooming Grove
- Blooming Grove is located in Morrow County
- West Point
(18 miles [29 km] to the southeast)- Note: The GPS coordinates that we are using for West Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Point
- West Point is located in Morrow County
- Edison
(20 miles [32.2 km] to the southeast)- Note: The GPS coordinates that we are using for Edison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edison
- Edison is located in Morrow County
- Population from the 2020 Census: 444 people
- Jump to TripAdvisor's Tourism page for Edison <2>
- Mount Gilead
(21 miles [33.8 km] to the southeast)- Note: The GPS coordinates that we are using for Mount Gilead have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Gilead
- Mount Gilead is located in Morrow County
- Population from the 2020 Census: 3,687 people
- Jump to TripAdvisor's Tourism page for Mount Gilead <2>
- Cardington
(23 miles [37 km] to the south)- Note: The GPS coordinates that we are using for Cardington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cardington
- Cardington is located in Morrow County
- Population from the 2020 Census: 2,076 people
- Jump to TripAdvisor's Tourism page for Cardington <2>
- Shawtown
(23 miles [37 km] to the south)- Jump to our Gazetteer entry for Shawtown
- Shawtown is located in Morrow County
- Fulton
(26 miles [41.8 km] to the southeast)- Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fulton
- Fulton is located in Morrow County
- Population from the 2020 Census: 251 people
- Jump to TripAdvisor's Tourism page for Fulton <2>
- Chesterville
(30 miles [48.3 km] to the southeast)- Note: The GPS coordinates that we are using for Chesterville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chesterville
- Chesterville is located in Morrow County
- Population from the 2020 Census: 234 people
- Jump to TripAdvisor's Tourism page for Chesterville <2>
- Richland County
- The following are listed by their distance from Glenville, with the one closest to Glenville listed first.
- Bethlehem
(17 miles [27.4 km] to the east) - Vernon Junction
(19 miles [30.6 km] to the east)- Jump to our Gazetteer entry for Vernon Junction
- Vernon Junction is located in Richland County
- Shelby
(21 miles [33.8 km] to the east)- Note: The GPS coordinates that we are using for Shelby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelby
- Shelby is located in Richland County
- Population from the 2020 Census: 9,066 people
- Jump to TripAdvisor's Tourism page for Shelby <2>
- Maybee
(22 miles [35.4 km] to the east)- Jump to our Gazetteer entry for Maybee
- Maybee is located in Richland County
- Ontario
(23 miles [37 km] to the east)- Note: The GPS coordinates that we are using for Ontario have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ontario
- Ontario is located in Richland County
- Population from the 2020 Census: 6,102 people
- Jump to TripAdvisor's Tourism page for Ontario <2>
- Plymouth
(23 miles [37 km] to the northeast)- Jump to our Gazetteer entry for Plymouth
- Plymouth is located in Richland County
- Population from the 2020 Census: 1,789 people
- Alta
(25 miles [40.2 km] to the east)- Jump to our Gazetteer entry for Alta
- Alta is located in Richland County
- Shiloh
(25 miles [40.2 km] to the northeast)- Note: The GPS coordinates that we are using for Shiloh have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shiloh
- Shiloh is located in Richland County
- Population from the 2020 Census: 617 people
- Jump to TripAdvisor's Tourism page for Shiloh <2>
- Ganges
(26 miles [41.8 km] to the east) - Lexington
(26 miles [41.8 km] to the east)- Note: The GPS coordinates that we are using for Lexington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lexington
- Lexington is located in Richland County
- Population from the 2020 Census: 4,695 people
- Jump to TripAdvisor's Tourism page for Lexington <2>
- Hanley Village
(27 miles [43.5 km] to the east)- Note: The GPS coordinates that we are using for Hanley Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanley Village
- Hanley Village is located in Richland County
- Mansfield
(28 miles [45.1 km] to the east)- Jump to our Gazetteer entry for Mansfield
- Mansfield is located in Richland County
- Population from the 2020 Census: 46,125 people
- Jump to TripAdvisor's Tourism page for Mansfield <2>
- Shenandoah
(29 miles [46.7 km] to the east)- Note: The GPS coordinates that we are using for Shenandoah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shenandoah
- Shenandoah is located in Richland County
- Seneca County
- The following are listed by their distance from Glenville, with the one closest to Glenville listed first.
- Melmore
(14 miles [22.5 km] to the north)- Jump to our Gazetteer entry for Melmore
- Melmore is located in Seneca County
- Carrothers
(14 miles [22.5 km] to the northeast)- Jump to our Gazetteer entry for Carrothers
- Carrothers is located in Seneca County
- Bloomville
(16 miles [25.7 km] to the north)- Jump to our Gazetteer entry for Bloomville
- Bloomville is located in Seneca County
- Population from the 2020 Census: 906 people
- Jump to TripAdvisor's Tourism page for Bloomville <2>
- McCutchenville
(16 miles [25.7 km] to the northwest)- Jump to our Gazetteer entry for McCutchenville
- McCutchenville is located in Seneca County
- Jump to TripAdvisor's Tourism page for McCutchenville <2>
- Caroline
(18 miles [29 km] to the northeast)- Jump to our Gazetteer entry for Caroline
- Caroline is located in Seneca County
- Attica
(19 miles [30.6 km] to the northeast)- Note: The GPS coordinates that we are using for Attica have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Attica
- Attica is located in Seneca County
- Population from the 2020 Census: 862 people
- Jump to TripAdvisor's Tourism page for Attica <2>
- Adrian
(19 miles [30.6 km] to the northwest)- Jump to our Gazetteer entry for Adrian
- Adrian is located in Seneca County
- Jump to TripAdvisor's Tourism page for Adrian <2>
- Berwick
(19 miles [30.6 km] to the northwest)- Jump to our Gazetteer entry for Berwick
- Berwick is located in Seneca County
- Scipio
(20 miles [32.2 km] to the north) - Attica Junction
(20 miles [32.2 km] to the northeast)- Jump to our Gazetteer entry for Attica Junction
- Attica Junction is located in Seneca County
- Republic
(21 miles [33.8 km] to the north)- Note: The GPS coordinates that we are using for Republic have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Republic
- Republic is located in Seneca County
- Population from the 2020 Census: 518 people
- Jump to TripAdvisor's Tourism page for Republic <2>
- Tiffin
(21 miles [33.8 km] to the north)- Jump to our Gazetteer entry for Tiffin
- Tiffin is located in Seneca County
- Population from the 2020 Census: 17,359 people
- Jump to TripAdvisor's Tourism page for Tiffin <2>
- New Riegel
(21 miles [33.8 km] to the northwest)- Jump to our Gazetteer entry for New Riegel
- New Riegel is located in Seneca County
- Population from the 2020 Census: 234 people
- Jump to TripAdvisor's Tourism page for New Riegel <2>
- Union County
- Richwood
(29 miles [46.7 km] to the southwest)- Jump to our Gazetteer entry for Richwood
- Richwood is located in Union County
- Population from the 2020 Census: 2,554 people
- Jump to TripAdvisor's Tourism page for Richwood <2>
- Richwood
- Wyandot County
- The following are listed by their distance from Glenville, with the one closest to Glenville listed first.
- Nevada
(4 miles [6.4 km] to the west)- Jump to our Gazetteer entry for Nevada
- Nevada is located in Wyandot County
- Population from the 2020 Census: 727 people
- Jump to TripAdvisor's Tourism page for Nevada <2>
- Wyandot
(6 miles [9.7 km] to the southwest)- Jump to our Gazetteer entry for Wyandot
- Wyandot is located in Wyandot County
- Duenquat
(8 miles [12.9 km] to the northwest)- Jump to our Gazetteer entry for Duenquat
- Duenquat is located in Wyandot County
- Belle Vernon
(11 miles [17.7 km] to the northwest)- Jump to our Gazetteer entry for Belle Vernon
- Belle Vernon is located in Wyandot County
- Sycamore
(11 miles [17.7 km] to the northwest) - Harpster
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Harpster
- Harpster is located in Wyandot County
- Population from the 2020 Census: 192 people
- Jump to TripAdvisor's Tourism page for Harpster <2>
- Upper Sandusky
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Upper Sandusky
- Upper Sandusky is located in Wyandot County
- Population from the 2020 Census: 6,436 people
- Mexico
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Mexico
- Mexico is located in Wyandot County
- Carey
(19 miles [30.6 km] to the northwest)- Jump to our Gazetteer entry for Carey
- Carey is located in Wyandot County
- Population from the 2020 Census: 3,540 people
- Jump to TripAdvisor's Tourism page for Carey <2>
- Marseilles
(19 miles [30.6 km] to the southwest)- Note: The GPS coordinates that we are using for Marseilles have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marseilles
- Marseilles is located in Wyandot County
- Population from the 2020 Census: 106 people
- Kirby
(19 miles [30.6 km] to the west)- Note: The GPS coordinates that we are using for Kirby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirby
- Kirby is located in Wyandot County
- Population from the 2020 Census: 112 people
- Jump to TripAdvisor's Tourism page for Kirby <2>
- Wharton
(21 miles [33.8 km] to the west)
For an expanded list of the communities that are closest to Glenville, see our County-by-County Page for Glenville.
Newspapers Published in Glenville ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 63 newspapers that have been published in the area around Glenville.
Although we're unaware of any newspapers that were published in the immediate area of Glenville, there are papers which were published within 23 miles [37 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Glenville.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Glenville:
- Websites specific to Ohio
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Website for the //www.ohiohistory.org/learn/archives-library
- Pages specific to Crawford County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Genealogy information for nearby counties
- Delaware County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Hancock County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Hardin County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Huron County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Knox County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Marion County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Morrow County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Richland County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Seneca County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Union County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Wyandot County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Delaware County
- Cemetery Information and Directories for Ohio
- Cemetery Junction: Cemeteries of Ohio
- Cyndi's List
- Cemeteries of Ohio
- Cemeteries of Crawford County
- FamilySearch.org: Cemeteries of Ohio
- Find-A-Grave: Home Page
- Interment.net
- Cemeteries of Ohio
- Cemeteries of Crawford County
Cemeteries Near Glenville ...
Below are cemeteries that are in the vicinity of Glenville.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Glenville covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Glenville, with the one closest to Glenville listed first.
- German Reformed Cemetery
(Less than 2 miles to the west)- Note: The GPS coordinates that we are using for the German Reformed Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the German Reformed Cemetery
- Mt. Zion Cemetery
(2 miles [3.2 km] to the south)- Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Mt. Zion Cemetery
- Oceola #1 Cemetery
(2 miles [3.2 km] to the northwest)- Note: The GPS coordinates that we are using for the Oceola #1 Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Oceola #1 Cemetery
- Oceola #3 Cemetery
(2 miles [3.2 km] to the northwest)- Note: The GPS coordinates that we are using for the Oceola #3 Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Oceola #3 Cemetery
- Oceola #2 Cemetery
(2 miles [3.2 km] to the northwest)- Note: The GPS coordinates that we are using for the Oceola #2 Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Oceola #2 Cemetery
- Bethel Cemetery
(3 miles [4.8 km] to the north)- Note: The GPS coordinates that we are using for the Bethel Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Bethel Cemetery
- Oakwood Cemetery
(3 miles [4.8 km] to the east)- Jump to our Gazetteer entry for the Oakwood Cemetery
- Holy Trinity Cemetery
(3 miles [4.8 km] to the east)- Note: The GPS coordinates that we are using for the Holy Trinity Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Holy Trinity Cemetery
- Tiffin Road Cemetery
(3 miles [4.8 km] to the east)- Note: The GPS coordinates that we are using for the Tiffin Road Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Tiffin Road Cemetery
- Friends Cemetery
(4 miles [6.4 km] to the east)- Note: The GPS coordinates that we are using for the Friends Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Friends Cemetery
- Nevada Cemetery
(4 miles [6.4 km] to the west)- Note: The GPS coordinates that we are using for the Nevada Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Nevada Cemetery
- Burkes Cemetery
(5 miles [8 km] to the west)- Note: The GPS coordinates that we are using for the Burkes Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Burkes Cemetery
- Continue List (511 more) ...
- Monnett Chapel Cemetery
(5 miles [8 km] to the southeast)- Note: The GPS coordinates that we are using for the Monnett Chapel Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Monnett Chapel Cemetery
- Swartz Cemetery
(6 miles [9.7 km] to the southwest)- Note: The GPS coordinates that we are using for the Swartz Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Swartz Cemetery
- Wyandot Indian Cemetery
(6 miles [9.7 km] to the southwest)- Note: The GPS coordinates that we are using for the Wyandot Indian Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Wyandot Indian Cemetery
- Monnett Chapel Cemetery
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.
Glenville itself is historic and was described in the Rand McNally Atlas as having railroad service and no post office.
These communities are listed based on their distance from Glenville, with the one closest to Glenville listed first.
- Bucyrus
(3 miles [4.8 km] to the east)- Jump to our Gazetteer entry for Bucyrus
- Bucyrus is located in Crawford County
- Population from the 2020 Census: 11,738 people
- Jump to TripAdvisor's Tourism page for Bucyrus <2>
- Spore
(3 miles [4.8 km] to the north) - Oceola
(3 miles [4.8 km] to the northwest)- Jump to our Gazetteer entry for Oceola
- Oceola is located in Crawford County
- Nevada
(4 miles [6.4 km] to the west)- Jump to our Gazetteer entry for Nevada
- Nevada is located in Wyandot County
- Population from the 2020 Census: 727 people
- Jump to TripAdvisor's Tourism page for Nevada <2>
- Lemert
(5 miles [8 km] to the northwest)- Jump to our Gazetteer entry for Lemert
- Lemert is located in Crawford County
- Wyandot
(6 miles [9.7 km] to the southwest)- Jump to our Gazetteer entry for Wyandot
- Wyandot is located in Wyandot County
- Brandywine
(6 miles [9.7 km] to the northeast)- Note: The GPS coordinates that we are using for Brandywine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brandywine
- Brandywine is located in Crawford County
- Broken Sword
(6 miles [9.7 km] to the north)- Jump to our Gazetteer entry for Broken Sword
- Broken Sword is located in Crawford County
- Broken Sword has also been known as:
- Bloody Corners
- Porterville
- Wingarts Corners
- Wingert Corners
- Wingerts Corners
- Seal
(6 miles [9.7 km] to the northwest) - Kirkpatrick
(8 miles [12.9 km] to the south)- Note: The GPS coordinates that we are using for Kirkpatrick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirkpatrick
- Kirkpatrick is located in Marion County
- Deunquat
(8 miles [12.9 km] to the northwest) - Douglass ‑ Historic
(8 miles [12.9 km] to the west) - Continue List (16 more) ...
- New Winchester
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for New Winchester have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Winchester
- New Winchester is located in Crawford County
- Sulphur Springs
(9 miles [14.5 km] to the northeast)- Note: The GPS coordinates that we are using for Sulphur Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sulphur Springs
- Sulphur Springs is located in Crawford County
- Little Sandusky
(10 miles [16.1 km] to the southwest)- Note: The GPS coordinates that we are using for Little Sandusky have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Sandusky
- Little Sandusky is located in Wyandot County
- New Winchester
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Glenville. See our List of 1890's Communities around Glenville.
Off-the-Road Links ...
The official website for Crawford County: www.crawford-co.org/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Glenville, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <5> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Glenville) to Point B.Our distance measurements begin at a specific point in Glenville. The point we use is located at these GPS coordinates - Latitude: 40.8134, Longitude: -83.0507 In this case, the coordinates for Glenville have been provided by the Geographic Names Information System (GNIS). |