|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pisgah Ridge Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pisgah Ridge Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Pisgah Ridge Cemetery. We've listed the following communities based on their distance, with the closest first.
- Dover
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Dover have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dover
- Dover is located in Mason County (KY)
- Population from the 2020 Census: 252 people
- South Ripley
(3 miles [4.8 km] to the southeast)
- Ripley
(3 miles [4.8 km] to the southeast)
- Higginsport
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Higginsport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Higginsport
- Higginsport is located in Brown County
- Population from the 2020 Census: 242 people
- Jump to TripAdvisor's Tourism page for Higginsport <3>
- Minerva
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Minerva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minerva
- Minerva is located in Mason County (KY)
- Augusta
(6 miles [9.7 km] to the west)
- Georgetown
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Georgetown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Brown County
- Population from the 2020 Census: 4,216 people
- Jump to TripAdvisor's Tourism page for Georgetown <3>
- Russellville
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Russellville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Russellville
- Russellville is located in Brown County
- Population from the 2020 Census: 510 people
- Chatham
(8 miles [12.9 km] to the southwest)
- Sunshine ‑ Historic
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Sunshine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunshine
- Sunshine is located in Brown County
- Neel
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Neel. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Neel
- Neel is located in Brown County
- Google driving directions:
- From your current location to Neel
- From the Pisgah Ridge Cemetery to Neel
- White Oak Valley
(9 miles [14.5 km] to the north)
- Germantown
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Germantown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Germantown
- Germantown is located in Bracken County (KY)
- Population from the 2020 Census: 149 people
- Slickaway ‑ Historic
(9 miles [14.5 km] to the southeast)
- Decatur
(9 miles [14.5 km] to the east)
- Feesburg
(9 miles [14.5 km] to the northwest)
- Utopia
(9 miles [14.5 km] to the west)
- Aberdeen
(10 miles [16.1 km] to the southeast)
- Hamersville
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Hamersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamersville
- Hamersville is located in Brown County
- Population from the 2020 Census: 494 people
- Jump to TripAdvisor's Tourism page for Hamersville <3>
- Ash Ridge
(10 miles [16.1 km] to the northeast)
- Arnheim
(10 miles [16.1 km] to the north)
- Ellsberry
(11 miles [17.7 km] to the southeast)
- Maple
(11 miles [17.7 km] to the northwest)
- Rock Springs
(11 miles [17.7 km] to the west)
- Brooksville
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brooksville
- Brooksville is located in Bracken County (KY)
- Population from the 2020 Census: 650 people
- Jump to TripAdvisor's Tourism page for Brooksville <3>
- Washington
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Washington came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Washington
- Washington is located in Mason County (KY)
- Maysville
(12 miles [19.3 km] to the southeast)
- Bradysville
(12 miles [19.3 km] to the southeast)
- Felicity
(12 miles [19.3 km] to the west)
- New Hope
(12 miles [19.3 km] to the north)
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pisgah Ridge Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.7818, Longitude: -83.8800 |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |
|
|