|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pisgah Church of Christ Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pisgah Church of Christ Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Pisgah Church of Christ Cemetery (FG ID #2338481). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Pisgah Church of Christ Cemetery. We've listed the following communities based on their distance, with the closest first.
- Middlebourne
(2 miles [3.2 km] to the west)
- Fairview
(3 miles [4.8 km] to the east)
- Antrim
(5 miles [8 km] to the northwest)
- Elizabethtown
(6 miles [9.7 km] to the west)
- Salesville
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Salesville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salesville
- Salesville is located in Guernsey County
- Estimated population in 2016: 126 people
- Jump to TripAdvisor's Tourism page for Salesville <3>
- Quaker City
(6 miles [9.7 km] to the south)
- Hendrysburg
(6 miles [9.7 km] to the east)
- Londonderry
(6 miles [9.7 km] to the north)
- Easton ‑ Historic
(7 miles [11.3 km] to the west)
- Winterset
(7 miles [11.3 km] to the northwest)
- Old Washington
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Old Washington have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Washington
- Old Washington is located in Guernsey County
- Population from the 2020 Census: 267 people
- Jump to TripAdvisor's Tourism page for Old Washington <3>
- Gibson
(8 miles [12.9 km] to the southwest)
- Barnesville
(8 miles [12.9 km] to the southeast)
- Lore City
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Lore City have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lore City
- Lore City is located in Guernsey County
- Population from the 2020 Census: 309 people
- Jump to TripAdvisor's Tourism page for Lore City <3>
- Batesville
(10 miles [16.1 km] to the south)
- Freeport
(10 miles [16.1 km] to the north)
- Birmingham
(10 miles [16.1 km] to the northwest)
- Brady ‑ Historic
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Brady have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brady
- Brady is located in Guernsey County
- Kennonsburg
(11 miles [17.7 km] to the south)
- Morristown
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Morristown have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morristown
- Morristown is located in Belmont County
- Population from the 2020 Census: 285 people
- Rock Hill
(11 miles [17.7 km] to the northeast)
- Holloway
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Holloway have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holloway
- Holloway is located in Belmont County
- Population from the 2020 Census: 311 people
- Odell
(11 miles [17.7 km] to the northwest)
- Clio ‑ Historic
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Clio have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clio
- Clio is located in Guernsey County
- West Chester
(12 miles [19.3 km] to the north)
- Senecaville
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Senecaville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Senecaville
- Senecaville is located in Guernsey County
- Population from the 2020 Census: 447 people
- Jump to TripAdvisor's Tourism page for Senecaville <3>
- Bethesda
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Bethesda have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethesda
- Bethesda is located in Belmont County
- Population from the 2020 Census: 1,198 people
- Jump to TripAdvisor's Tourism page for Bethesda <3>
- Center
(12 miles [19.3 km] to the west)
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pisgah Church of Christ Cemetery. The point we use is located at these GPS coordinates - Latitude: 40.0615, Longitude: -81.2952 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|