|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the McDonald Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the McDonald Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the McDonald Cemetery. We've listed the following communities based on their distance, with the closest first.
- New Jasper
(3 miles [4.8 km] to the east)
- Xenia
(3 miles [4.8 km] to the northwest)
- Pinewood Village
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Pinewood Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinewood Village
- Pinewood Village is located in Greene County
- Shawnee Hills
(5 miles [8 km] to the east)
- Wilberforce
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Wilberforce have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilberforce
- Wilberforce is located in Greene County
- Jump to TripAdvisor's Tourism page for Wilberforce <3>
- Spring Valley
(6 miles [9.7 km] to the west)
- Jamestown
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Jamestown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jamestown
- Jamestown is located in Greene County
- Population from the 2020 Census: 2,146 people
- Jump to TripAdvisor's Tourism page for Jamestown <3>
- Trebein
(7 miles [11.3 km] to the northwest)
- Roxanna
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Roxanna. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Roxanna
- Roxanna is located in Greene County
- Google driving directions:
- From your current location to Roxanna
- From the McDonald Cemetery to Roxanna
- Port William
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Port William have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port William
- Port William is located in Clinton County
- Population from the 2020 Census: 247 people
- Cedarville
(8 miles [12.9 km] to the northeast)
- North Kingman
(9 miles [14.5 km] to the south)
- Bowersville
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Bowersville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bowersville
- Bowersville is located in Greene County
- Population from the 2020 Census: 332 people
- Beavercreek
(10 miles [16.1 km] to the northwest)
- Bellbrook
(10 miles [16.1 km] to the west)
- Harveysburg
(11 miles [17.7 km] to the southwest)
- Yellow Springs
(11 miles [17.7 km] to the north)
- Grape Grove
(11 miles [17.7 km] to the northeast)
- Clifton
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Clifton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clifton
- Clifton is located in Greene County
- Population from the 2020 Census: 147 people
- Jump to TripAdvisor's Tourism page for Clifton <3>
- Waynesville
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Waynesville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waynesville
- Waynesville is located in Warren County
- Population from the 2020 Census: 3,251 people
- Jump to TripAdvisor's Tourism page for Waynesville <3>
- Corwin
(13 miles [20.9 km] to the southwest)
- Wilmington
(13 miles [20.9 km] to the south)
- Fairborn
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Fairborn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairborn
- Fairborn is located in Greene County
- Population from the 2020 Census: 33,990 people
- Jump to TripAdvisor's Tourism page for Fairborn <3>
- Cortsville
(13 miles [20.9 km] to the northeast)
- Octa
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Octa have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Octa
- Octa is located in Fayette County
- Population from the 2020 Census: 59 people
- Centerville
(14 miles [22.5 km] to the west)
Off-the-Road Links ...
The official website for Greene County: www.co.greene.oh.us/ The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the McDonald Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.6411, Longitude: -83.8825 In this case, the coordinates for the McDonald Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|