|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Liberty Hill Church Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Liberty Hill Church Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Liberty Hill Church Cemetery. We've listed the following communities based on their distance, with the closest first.
- Massieville
(2 miles [3.2 km] to the southeast)
- North Fork Village
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for North Fork Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Fork Village
- North Fork Village is located in Ross County
- Chillicothe
(3 miles [4.8 km] to the north)
- Deadman Crossing
(4 miles [6.4 km] to the east)
- Riton ‑ Historic
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Riton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riton
- Riton is located in Ross County
- Knockemstiff ‑ Historic
(5 miles [8 km] to the west)
- Alma
(6 miles [9.7 km] to the south)
- Summithill
(7 miles [11.3 km] to the southwest)
- Schooley
(7 miles [11.3 km] to the east)
- Peck
(8 miles [12.9 km] to the south)
- Bourneville
(8 miles [12.9 km] to the west)
- Nipgen
(9 miles [14.5 km] to the southwest)
- Musselman
(9 miles [14.5 km] to the northwest)
- Waverly
(10 miles [16.1 km] to the south)
- Waverly City
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Waverly City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waverly City
- Waverly City is located in Pike County
- Estimated population in 2011: 4,395 people
- Bristol Village
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Bristol Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bristol Village
- Bristol Village is located in Pike County
- Andersonville
(10 miles [16.1 km] to the north)
- Dills
(11 miles [17.7 km] to the west)
- Richmond Dale
(11 miles [17.7 km] to the southeast)
- Roxabell
(11 miles [17.7 km] to the northwest)
- Lattaville
(11 miles [17.7 km] to the northwest)
- Frankfort
(12 miles [19.3 km] to the northwest)
- Bainbridge
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Bainbridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bainbridge
- Bainbridge is located in Ross County
- Population from the 2020 Census: 846 people
- Jump to TripAdvisor's Tourism page for Bainbridge <3>
- Piketon
(14 miles [22.5 km] to the south)
- Greggs
(14 miles [22.5 km] to the south)
- Mount Sinai
(14 miles [22.5 km] to the southeast)
- Kingston
(14 miles [22.5 km] to the north)
Off-the-Road Links ...
The official website for Ross County: www.co.ross.oh.us/ The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Liberty Hill Church Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.2816, Longitude: -83.0083 |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|