Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Allens Chapel Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Allens Chapel Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Allens Chapel Cemetery. We've listed the following communities based on their distance, with the closest first.
- Summerfield
(2 miles [3.2 km] to the east)- Note: The GPS coordinates that we are using for Summerfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summerfield
- Summerfield is located in Noble County
- Population from the 2020 Census: 248 people
- Whigville
(2 miles [3.2 km] to the north) - Mount Ephraim
(4 miles [6.4 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Mount Ephraim. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mount Ephraim
- Mount Ephraim is located in Noble County
- Fulda
(5 miles [8 km] to the southwest)- Jump to our Gazetteer entry for Fulda
- Fulda is located in Noble County
- Sarahsville
(5 miles [8 km] to the west)- Jump to our Gazetteer entry for Sarahsville
- Sarahsville is located in Noble County
- Population from the 2020 Census: 171 people
- Mud Run
(6 miles [9.7 km] to the north)- Jump to our Gazetteer entry for Mud Run
- Mud Run is located in Noble County
- Ashton
(7 miles [11.3 km] to the southwest)- Jump to our Gazetteer entry for Ashton
- Ashton is located in Noble County
- Stafford
(7 miles [11.3 km] to the southeast) - Caldwell
(8 miles [12.9 km] to the southwest)- Jump to our Gazetteer entry for Caldwell
- Caldwell is located in Noble County
- Population from the 2020 Census: 1,639 people
- Jump to TripAdvisor's Tourism page for Caldwell <4>
- Lewisville
(8 miles [12.9 km] to the east)- Jump to our Gazetteer entry for Lewisville
- Lewisville is located in Monroe County
- Population from the 2020 Census: 162 people
- Kennonsburg
(8 miles [12.9 km] to the north)- Jump to our Gazetteer entry for Kennonsburg
- Kennonsburg is located in Noble County
- Batesville
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Batesville
- Batesville is located in Noble County
- Population from the 2020 Census: 98 people
- Mount Zion
(9 miles [14.5 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Mount Zion. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mount Zion
- Mount Zion is located in Noble County
- Belle Valley
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Belle Valley
- Belle Valley is located in Noble County
- Population from the 2020 Census: 214 people
- Jump to TripAdvisor's Tourism page for Belle Valley <4>
- Sharon
(10 miles [16.1 km] to the west)- Jump to our Gazetteer entry for Sharon
- Sharon is located in Noble County
- South Olive
(10 miles [16.1 km] to the southwest)- Jump to our Gazetteer entry for South Olive
- South Olive is located in Noble County
- Dexter City
(10 miles [16.1 km] to the southwest)- Note: The GPS coordinates that we are using for Dexter City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dexter City
- Dexter City is located in Noble County
- Population from the 2020 Census: 124 people
- Senecaville
(10 miles [16.1 km] to the northwest)- Note: The GPS coordinates that we are using for Senecaville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Senecaville
- Senecaville is located in Guernsey County
- Population from the 2020 Census: 447 people
- Jump to TripAdvisor's Tourism page for Senecaville <4>
- Macksburg
(11 miles [17.7 km] to the south)- Jump to our Gazetteer entry for Macksburg
- Macksburg is located in Washington County
- Population from the 2020 Census: 181 people
- Jump to TripAdvisor's Tourism page for Macksburg <4>
- Harriettsville
(11 miles [17.7 km] to the south)- Jump to our Gazetteer entry for Harriettsville
- Harriettsville is located in Noble County
- Miltonsburg
(11 miles [17.7 km] to the east)- Note: The GPS coordinates that we are using for Miltonsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miltonsburg
- Miltonsburg is located in Monroe County
- Population from the 2020 Census: 41 people
- Buffalo
(11 miles [17.7 km] to the northwest)- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Guernsey County
- Jump to TripAdvisor's Tourism page for Buffalo <4>
- Pleasant City
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Pleasant City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant City
- Pleasant City is located in Guernsey County
- Population from the 2020 Census: 422 people
- Jump to TripAdvisor's Tourism page for Pleasant City <4>
- Hoskinsville
(11 miles [17.7 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Hoskinsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hoskinsville
- Hoskinsville is located in Noble County
- Crooked Tree
(12 miles [19.3 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for Crooked Tree. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Crooked Tree
- Crooked Tree is located in Noble County
- Elba
(12 miles [19.3 km] to the south)- Jump to our Gazetteer entry for Elba
- Elba is located in Washington County
- Edwina
(12 miles [19.3 km] to the southeast) - Quaker City
(12 miles [19.3 km] to the north)- Jump to our Gazetteer entry for Quaker City
- Quaker City is located in Guernsey County
- Population from the 2020 Census: 485 people
- Jump to TripAdvisor's Tourism page for Quaker City <4>
- Salesville
(12 miles [19.3 km] to the north)- Note: The GPS coordinates that we are using for Salesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salesville
- Salesville is located in Guernsey County
- Estimated population in 2016: 126 people
- Jump to TripAdvisor's Tourism page for Salesville <4>
- Gibson
(12 miles [19.3 km] to the north)- Jump to our Gazetteer entry for Gibson
- Gibson is located in Guernsey County
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Allens Chapel Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.7923, Longitude: -81.3765 In this case, the coordinates for the Allens Chapel Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |