Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Bantam (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Bantam. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Bantam is located in Clermont County.
To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Clermont County: Bracken (KY), Campbell (KY), Pendleton (KY), Brown, Clinton, Hamilton & Warren.
Below are the counties that are near Bantam. For each of these counties, we show a sample of those communities that are closest to Bantam:
- Clermont County (The home county of Bantam)
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Elk Lick ‑ Historic
(Less than 2 miles to the north)
- Note: We haven't been able to verify our GPS coordinates for Elk Lick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Elk Lick
- Elk Lick is located in Clermont County
- Google driving directions:
- From your current location to Elk Lick
- From Bantam to Elk Lick
- Fair Oaks
(Less than 2 miles to the west)
- Note: The GPS coordinates that we are using for Fair Oaks have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fair Oaks
- Fair Oaks is located in Clermont County
- Hulington
(Less than 2 miles to the west)
- Note: We haven't been able to verify our GPS coordinates for Hulington. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hulington
- Hulington is located in Clermont County
- Google driving directions:
- From your current location to Hulington
- From Bantam to Hulington
- Bethel
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel
- Bethel is located in Clermont County
- Population from the 2020 Census: 2,825 people
- Jump to TripAdvisor's Tourism page for Bethel <3>
- Nicholsville
(3 miles [4.8 km] to the southwest)
- Afton
(4 miles [6.4 km] to the northeast)
- Amelia
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Amelia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Amelia
- Amelia is located in Clermont County
- Estimated population in 2019: 5,039 people
- Jump to TripAdvisor's Tourism page for Amelia <3>
- Batavia
(5 miles [8 km] to the north)
- Williamsburg
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Williamsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamsburg
- Williamsburg is located in Clermont County
- Population from the 2020 Census: 2,574 people
- Jump to TripAdvisor's Tourism page for Williamsburg <3>
- Braziers
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Braziers. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Braziers
- Braziers is located in Clermont County
- Google driving directions:
- From your current location to Braziers
- From Bantam to Braziers
- Locust Corner
(7 miles [11.3 km] to the west)
- New Richmond
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for New Richmond have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Richmond
- New Richmond is located in Clermont County
- Population from the 2020 Census: 2,706 people
- Jump to TripAdvisor's Tourism page for New Richmond <3>
- Adams County
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Emerald
(25 miles [40.2 km] to the east)
- Winchester
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Winchester have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winchester
- Winchester is located in Adams County
- Population from the 2020 Census: 1,002 people
- Jump to TripAdvisor's Tourism page for Winchester <3>
- Cherry Fork
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Cherry Fork have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cherry Fork
- Cherry Fork is located in Adams County
- Estimated population in 2016: 155 people
- Buck Run ‑ Historic
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Buck Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buck Run
- Buck Run is located in Adams County
- Seaman
(30 miles [48.3 km] to the east)
- Brown County
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Locust Ridge
(7 miles [11.3 km] to the east)
- Maple
(8 miles [12.9 km] to the southeast)
- Hamersville
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Hamersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamersville
- Hamersville is located in Brown County
- Population from the 2020 Census: 494 people
- Jump to TripAdvisor's Tourism page for Hamersville <3>
- Mount Orab
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Mount Orab have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Orab
- Mount Orab is located in Brown County
- Population from the 2020 Census: 3,422 people
- Jump to TripAdvisor's Tourism page for Mount Orab <3>
- Feesburg
(11 miles [17.7 km] to the southeast)
- Bardwell
(12 miles [19.3 km] to the east)
- New Hope
(12 miles [19.3 km] to the east)
- White Oak Valley
(12 miles [19.3 km] to the southeast)
- Fivemile
(13 miles [20.9 km] to the northeast)
- Sunshine ‑ Historic
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Sunshine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunshine
- Sunshine is located in Brown County
- Vera Cruz
(15 miles [24.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Vera Cruz. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Vera Cruz
- Vera Cruz is located in Brown County
- Google driving directions:
- From your current location to Vera Cruz
- From Bantam to Vera Cruz
- Georgetown
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Georgetown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Brown County
- Population from the 2020 Census: 4,216 people
- Jump to TripAdvisor's Tourism page for Georgetown <3>
- Butler County
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Gano
(25 miles [40.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Gano. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gano
- Gano is located in Butler County
- Google driving directions:
- From your current location to Gano
- From Bantam to Gano
- West Chester
(26 miles [41.8 km] to the northwest)
- Olde West Chester
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Olde West Chester have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olde West Chester
- Olde West Chester is located in Butler County
- Beckett Ridge
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Beckett Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beckett Ridge
- Beckett Ridge is located in Butler County
- Tylersville
(28 miles [45.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Tylersville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Tylersville
- Tylersville is located in Butler County
- Google driving directions:
- From your current location to Tylersville
- From Bantam to Tylersville
- Wetherington
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Wetherington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wetherington
- Wetherington is located in Butler County
- Bethany
(29 miles [46.7 km] to the northwest)
- Stockton
(29 miles [46.7 km] to the northwest)
- Taylor Village
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Taylor Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylor Village
- Taylor Village is located in Butler County
- Clinton County
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Blanchester
(21 miles [33.8 km] to the north)
- Westboro
(23 miles [37 km] to the northeast)
- Midland
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midland
- Midland is located in Clinton County
- Population from the 2020 Census: 317 people
- Martinsville
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Martinsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martinsville
- Martinsville is located in Clinton County
- Population from the 2020 Census: 439 people
- Clarksville
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Clarksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Clinton County
- Population from the 2020 Census: 552 people
- Jump to TripAdvisor's Tourism page for Clarksville <3>
- Morrisville
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Morrisville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Morrisville
- Morrisville is located in Clinton County
- Google driving directions:
- From your current location to Morrisville
- From Bantam to Morrisville
- Hamilton County
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Mount Summit
(11 miles [17.7 km] to the northwest)
- Dry Run
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Dry Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dry Run
- Dry Run is located in Hamilton County
- Forestville
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Forestville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forestville
- Forestville is located in Hamilton County
- Fruit Hill
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Fruit Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fruit Hill
- Fruit Hill is located in Hamilton County
- Milford
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milford
- Milford is located in Hamilton County
- Population from the 2020 Census: 6,801 people
- Jump to TripAdvisor's Tourism page for Milford <3>
- Sherwood Village
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Sherwood Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherwood Village
- Sherwood Village is located in Hamilton County
- Sherwood
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Sherwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherwood
- Sherwood is located in Hamilton County
- Newtown
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Newtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newtown
- Newtown is located in Hamilton County
- Population from the 2020 Census: 2,665 people
- Jump to TripAdvisor's Tourism page for Newtown <3>
- Terrace Park
(14 miles [22.5 km] to the northwest)
- Turpin Hills
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Turpin Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turpin Hills
- Turpin Hills is located in Hamilton County
- East Madisonville
(16 miles [25.7 km] to the northwest)
- Fairfax
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Fairfax have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfax
- Fairfax is located in Hamilton County
- Population from the 2020 Census: 1,701 people
- Highland County
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Sicily ‑ Historic
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Sicily. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sicily
- Sicily is located in Highland County
- Google driving directions:
- From your current location to Sicily
- From Bantam to Sicily
- Buford
(16 miles [25.7 km] to the east)
- Needfull
(16 miles [25.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Needfull. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Needfull
- Needfull is located in Highland County
- Google driving directions:
- From your current location to Needfull
- From Bantam to Needfull
- Harwood
(18 miles [29 km] to the northeast)
- Hollowtown
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Hollowtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hollowtown
- Hollowtown is located in Highland County
- Google driving directions:
- From your current location to Hollowtown
- From Bantam to Hollowtown
- Mowrystown
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Mowrystown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mowrystown
- Mowrystown is located in Highland County
- Population from the 2020 Census: 353 people
- Lynchburg
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynchburg
- Lynchburg is located in Highland County
- Population from the 2020 Census: 1,493 people
- Jump to TripAdvisor's Tourism page for Lynchburg <3>
- Sugar Tree Ridge
(26 miles [41.8 km] to the east)
- Shackleton
(27 miles [43.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Shackleton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Shackleton
- Shackleton is located in Highland County
- Google driving directions:
- From your current location to Shackleton
- From Bantam to Shackleton
- Hoagland
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Hoagland. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hoagland
- Hoagland is located in Highland County
- Google driving directions:
- From your current location to Hoagland
- From Bantam to Hoagland
- Willettsville
(29 miles [46.7 km] to the northeast)
- Folsom
(30 miles [48.3 km] to the east)
- Warren County
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Pleasant Plain
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Pleasant Plain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Plain
- Pleasant Plain is located in Warren County
- Population from the 2020 Census: 171 people
- Jump to TripAdvisor's Tourism page for Pleasant Plain <3>
- Comargo
(20 miles [32.2 km] to the north)
- Butlerville
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Butlerville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butlerville
- Butlerville is located in Warren County
- Population from the 2020 Census: 162 people
- Landen
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Landen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Landen
- Landen is located in Warren County
- Jump to TripAdvisor's Tourism page for Landen <3>
- Maineville
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Maineville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maineville
- Maineville is located in Warren County
- Population from the 2020 Census: 1,132 people
- Jump to TripAdvisor's Tourism page for Maineville <3>
- Morrow
(24 miles [38.6 km] to the north)
- Osceola
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Osceola have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osceola
- Osceola is located in Warren County
- San Je Village
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for San Je Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for San Je Village
- San Je Village is located in Warren County
- South Lebanon
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for South Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Lebanon
- South Lebanon is located in Warren County
- Population from the 2020 Census: 4,799 people
- Jump to TripAdvisor's Tourism page for South Lebanon <3>
- Mason
(26 miles [41.8 km] to the north)
- Hageman
(27 miles [43.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hageman. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hageman
- Hageman is located in Warren County
- Google driving directions:
- From your current location to Hageman
- From Bantam to Hageman
- Shadow Lake Village
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Shadow Lake Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shadow Lake Village
- Shadow Lake Village is located in Warren County
- Boone County (KY)
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Devon
(25 miles [40.2 km] to the west)
- Constance
(26 miles [41.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Constance. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Constance
- Constance is located in Boone County (KY)
- Google driving directions:
- From your current location to Constance
- From Bantam to Constance
- Florence
(26 miles [41.8 km] to the west)
- Kensington
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Kensington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kensington
- Kensington is located in Boone County (KY)
- Richwood
(26 miles [41.8 km] to the west)
- Walton
(26 miles [41.8 km] to the west)
- Stringtown
(27 miles [43.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Stringtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stringtown
- Stringtown is located in Boone County (KY)
- Google driving directions:
- From your current location to Stringtown
- From Bantam to Stringtown
- Union
(28 miles [45.1 km] to the west)
- Limaburg
(29 miles [46.7 km] to the west)
- Oakbrook
(29 miles [46.7 km] to the west)
- Hebron
(30 miles [48.3 km] to the west)
- Taylorsport
(30 miles [48.3 km] to the west)
- Bracken County (KY)
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Bradford
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Bradford. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Bradford
- Bradford is located in Bracken County (KY)
- Google driving directions:
- From your current location to Bradford
- From Bantam to Bradford
- Foster
(14 miles [22.5 km] to the south)
- Rock Springs
(16 miles [25.7 km] to the south)
- Augusta
(17 miles [27.4 km] to the southeast)
- Chatham
(20 miles [32.2 km] to the south)
- Brooksville
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brooksville
- Brooksville is located in Bracken County (KY)
- Population from the 2020 Census: 650 people
- Jump to TripAdvisor's Tourism page for Brooksville <3>
- Powersville
(23 miles [37 km] to the south)
- Neave
(24 miles [38.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Neave. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Neave
- Neave is located in Bracken County (KY)
- Google driving directions:
- From your current location to Neave
- From Bantam to Neave
- Germantown
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Germantown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Germantown
- Germantown is located in Bracken County (KY)
- Population from the 2020 Census: 149 people
- Milford
(28 miles [45.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Milford. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Milford
- Milford is located in Bracken County (KY)
- Google driving directions:
- From your current location to Milford
- From Bantam to Milford
- Campbell County (KY)
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- California
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for California have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for California
- California is located in Campbell County (KY)
- Population from the 2020 Census: 98 people
- Jump to TripAdvisor's Tourism page for California <3>
- Mentor
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Mentor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mentor
- Mentor is located in Campbell County (KY)
- Population from the 2020 Census: 226 people
- Flagg Spring
(10 miles [16.1 km] to the southwest)
- Ross
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Ross. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ross
- Ross is located in Campbell County (KY)
- Google driving directions:
- From your current location to Ross
- From Bantam to Ross
- Gubser Mill
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Gubser Mill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gubser Mill
- Gubser Mill is located in Campbell County (KY)
- Google driving directions:
- From your current location to Gubser Mill
- From Bantam to Gubser Mill
- Camp Springs
(11 miles [17.7 km] to the west)
- Melbourne
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Melbourne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Melbourne
- Melbourne is located in Campbell County (KY)
- Population from the 2020 Census: 487 people
- Jump to TripAdvisor's Tourism page for Melbourne <3>
- Kohler
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Kohler. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Kohler
- Kohler is located in Campbell County (KY)
- Google driving directions:
- From your current location to Kohler
- From Bantam to Kohler
- Alexandria
(13 miles [20.9 km] to the west)
- Silver Grove
(13 miles [20.9 km] to the west)
- Claryville
(14 miles [22.5 km] to the west)
- Crestview
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Crestview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crestview
- Crestview is located in Campbell County (KY)
- Population from the 2020 Census: 498 people
- Grant County (KY)
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Flingsville
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Flingsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flingsville
- Flingsville is located in Grant County (KY)
- Crittenden
(28 miles [45.1 km] to the southwest)
- Sherman
(30 miles [48.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Sherman. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sherman
- Sherman is located in Grant County (KY)
- Google driving directions:
- From your current location to Sherman
- From Bantam to Sherman
- Jefferson County (KY)
- Portland
(23 miles [37 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Portland. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Portland
- Portland is located in Jefferson County (KY)
- Google driving directions:
- From your current location to Portland
- From Bantam to Portland
- Kenton County (KY)
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Ryland Heights
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Ryland Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ryland Heights
- Ryland Heights is located in Kenton County (KY)
- Population from the 2020 Census: 1,081 people
- Visalia
(17 miles [27.4 km] to the west)
- White Villa
(18 miles [29 km] to the southwest)
- Fairview
(18 miles [29 km] to the west)
- Latonia Lakes
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Latonia Lakes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latonia Lakes
- Latonia Lakes is located in Kenton County (KY)
- Ryland
(18 miles [29 km] to the west)
- Kenton
(19 miles [30.6 km] to the southwest)
- Latonia
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Latonia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latonia
- Latonia is located in Kenton County (KY)
- Jump to TripAdvisor's Tourism page for Latonia <3>
- Taylor Mill
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Taylor Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylor Mill
- Taylor Mill is located in Kenton County (KY)
- Population from the 2020 Census: 6,820 people
- Jump to TripAdvisor's Tourism page for Taylor Mill <3>
- Morning View
(20 miles [32.2 km] to the southwest)
- Covington
(20 miles [32.2 km] to the west)
- Kenton Vale
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Kenton Vale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kenton Vale
- Kenton Vale is located in Kenton County (KY)
- Population from the 2020 Census: 109 people
- Mason County (KY)
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Dover
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Dover have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dover
- Dover is located in Mason County (KY)
- Population from the 2020 Census: 252 people
- Minerva
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Minerva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minerva
- Minerva is located in Mason County (KY)
- South Ripley
(23 miles [37 km] to the southeast)
- Pendleton County (KY)
- The following are listed by their distance from Bantam, with the one closest to Bantam listed first.
- Ivor
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ivor. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ivor
- Ivor is located in Pendleton County (KY)
- Google driving directions:
- From your current location to Ivor
- From Bantam to Ivor
- Carntown
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Carntown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Carntown
- Carntown is located in Pendleton County (KY)
- Google driving directions:
- From your current location to Carntown
- From Bantam to Carntown
- Peach Grove
(14 miles [22.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Peach Grove. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Peach Grove
- Peach Grove is located in Pendleton County (KY)
- Google driving directions:
- From your current location to Peach Grove
- From Bantam to Peach Grove
- Mount Auburn
(16 miles [25.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Mount Auburn. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Mount Auburn
- Mount Auburn is located in Pendleton County (KY)
- Google driving directions:
- From your current location to Mount Auburn
- From Bantam to Mount Auburn
- Caddo
(18 miles [29 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Caddo. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Caddo
- Caddo is located in Pendleton County (KY)
- Google driving directions:
- From your current location to Caddo
- From Bantam to Caddo
- Caldwell
(18 miles [29 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Caldwell. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Caldwell
- Caldwell is located in Pendleton County (KY)
- Google driving directions:
- From your current location to Caldwell
- From Bantam to Caldwell
- Boston
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Boston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boston
- Boston is located in Pendleton County (KY)
- Butler
(19 miles [30.6 km] to the southwest)
- Meridian
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Meridian have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meridian
- Meridian is located in Pendleton County (KY)
- Concord
(20 miles [32.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Concord. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Concord
- Concord is located in Pendleton County (KY)
- Google driving directions:
- From your current location to Concord
- From Bantam to Concord
- DeMossville
(20 miles [32.2 km] to the southwest)
- Menzie
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Menzie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Menzie
- Menzie is located in Pendleton County (KY)
- Robertson County (KY)
- Bratton
(29 miles [46.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Bratton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Bratton
- Bratton is located in Robertson County (KY)
- Google driving directions:
- From your current location to Bratton
- From Bantam to Bratton
For an expanded list of the communities that are closest to Bantam, see our County-by-County Page for Bantam.
Cemeteries Near Bantam ...
Below are cemeteries that are in the vicinity of Bantam.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Bantam covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Bantam, with the one closest to Bantam listed first.
- Old Bethel Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Old Bethel Cemetery
- Note: The GPS coordinates that we are using for the Old Bethel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Monroe Cemetery
(2 miles [3.2 km] to the southwest)
- Jump to our Gazetteer entry for the Monroe Cemetery
- Note: The GPS coordinates that we are using for the Monroe Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Sugartree Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Sugartree Cemetery
- Note: The GPS coordinates that we are using for the Sugartree Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Nicholsville Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the Nicholsville Cemetery
- Note: The GPS coordinates that we are using for the Nicholsville Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Brown Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Brown Cemetery
- Note: The GPS coordinates that we are using for the Brown Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Greenbrier Cemetery
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for the Greenbrier Cemetery
- Note: The GPS coordinates that we are using for the Greenbrier Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mt. Holly Christian Chapel Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Mt. Holly Christian Chapel Cemetery
- Note: The GPS coordinates that we are using for the Mt. Holly Christian Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Lindale Baptist Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the Lindale Baptist Cemetery
- Note: The GPS coordinates that we are using for the Lindale Baptist Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mt. Pisgah Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Mt. Pisgah Cemetery
- Note: The GPS coordinates that we are using for the Mt. Pisgah Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Tate Twp. Cemetery
(4 miles [6.4 km] to the southeast)
- Concord Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Concord Cemetery
- Note: The GPS coordinates that we are using for the Concord Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Lucy Run Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the Lucy Run Cemetery
- Note: The GPS coordinates that we are using for the Lucy Run Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (561 more) ...
- Amelia Methodist Episcopal Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the Amelia Methodist Episcopal Cemetery
- Note: The GPS coordinates that we are using for the Amelia Methodist Episcopal Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Alexander Robb Cemetery
(5 miles [8 km] to the southwest)
- Franklin Chapel Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Franklin Chapel Cemetery
- Note: The GPS coordinates that we are using for the Franklin Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that Bantam had a population of 188 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Bantam, with the one closest to Bantam listed first.
- Hulington
(Less than 2 miles to the west)
- Note: We haven't been able to verify our GPS coordinates for Hulington. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hulington
- Hulington is located in Clermont County
- Google driving directions:
- From your current location to Hulington
- From Bantam to Hulington
- South Bantam
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for South Bantam have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Bantam
- South Bantam is located in Clermont County
- Fair Oaks
(Less than 2 miles to the west)
- Note: The GPS coordinates that we are using for Fair Oaks have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fair Oaks
- Fair Oaks is located in Clermont County
- Mount Holly
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Mount Holly have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Holly
- Mount Holly is located in Clermont County
- Wiltsee
(2 miles [3.2 km] to the west)
- Note: The GPS coordinates that we are using for Wiltsee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wiltsee
- Wiltsee is located in Clermont County
- Nicholsville
(3 miles [4.8 km] to the southwest)
- Bethel
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel
- Bethel is located in Clermont County
- Population from the 2020 Census: 2,825 people
- Jump to TripAdvisor's Tourism page for Bethel <3>
- Hamlet
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Hamlet have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamlet
- Hamlet is located in Clermont County
- Lindale
(3 miles [4.8 km] to the west)
- Note: The GPS coordinates that we are using for Lindale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lindale
- Lindale is located in Clermont County
- Mount Pisgah
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Mount Pisgah have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Pisgah
- Mount Pisgah is located in Clermont County
- Saltair
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Saltair have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saltair
- Saltair is located in Clermont County
- Afton
(4 miles [6.4 km] to the northeast)
- Continue List (15 more) ...
- Amelia
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Amelia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Amelia
- Amelia is located in Clermont County
- Estimated population in 2019: 5,039 people
- Jump to TripAdvisor's Tourism page for Amelia <3>
- Batavia
(5 miles [8 km] to the north)
- Wiggonsville
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Wiggonsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wiggonsville
- Wiggonsville is located in Clermont County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Bantam. See our List of 1890's Communities around Bantam.
Newspapers Published in Bantam ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 35 newspapers that have been published in the area around Bantam.
Although we're unaware of any newspapers that were published in the immediate area of Bantam, there are papers which were published within 11 miles [17.7 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Bantam.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Bantam:
- Websites specific to Ohio
- Pages specific to Clermont County
- Genealogy information for nearby counties
- Adams County
- Brown County
- Butler County
- Clinton County
- Hamilton County
- Highland County
- Warren County
- Boone County
- Bracken County
- Campbell County
- Grant County
- Jefferson County
- Kenton County
- Mason County
- Pendleton County
- Robertson County
- Cemetery Information and Directories for Ohio
Off-the-Road Links ...
Unfortunately, we don't know of a website for Bantam. If you can help, please contact us through our Feedback Page.
The official website for Clermont County: www.co.clermont.oh.us/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Bantam, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Bantam) to Point B.Our distance measurements begin at a specific point in Bantam. The point we use is located at these GPS coordinates - Latitude: 38.9986, Longitude: -84.1415 |