A Gazetteer for the United States and Canada

Fulton, New York

Nearby Census Genealogy
Cemeteries Tidbits &
Other NY

Census Data for Fulton ...

Population ...

The most recent Census Estimate<1> was for 2019 and it gave Fulton a population of 11,115 people.

The last Decennial Census<2> was in 2010, which gave Fulton a population of 11,896 people.

The city of Fulton is located in Oswego County. The 2010 Census gave Oswego County; a population of 122,109 people. This means that Fulton had 9.74% of the county's total population, making it Oswego's 2nd most populous community.

At the same time, New York had a population of 19,378,102 people, meaning that Fulton had 0.06% of the total population of New York - making it the state's 207th most populous community.

Area ...

The 2010 Census shows that the sampling area for Fulton has a total area of 4.76 square miles [12.3 km²]. Of this total, 3.75 square miles [9.7 km²] is land, with the balance (21.05%) being water (1 square miles [2.6 km²]).

Oswego County has a land area of 951 square miles [2,464.8 km²]. At 3.75 square miles [9.7 km²], Fulton has 0.39% of the county's total land area.

  • Continue Reading ...
    • When the Census Bureau conducts a census for a city like Fulton, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.
    • Things like population, area and housing for Fulton reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Fulton might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
    • Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
    • Lat:   43° 18' 13"   (or 43.3°)
    • Lon:   -76° 23' 57"   (or -76.4°)
    • More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).

Housing Units ...

At the time of the 2010 Census, Fulton had 5,300 Housing Units<3> and with its population of 11,896 people, this averages 2.24 people per Housing Unit.

  • Continue Reading ...
    • The 2010 Census shows Fulton had a land area of 3.75 square miles [9.7 km²]. This translates to 1,114 Housing Units per square mile [430.3 housing units/km²].
    • From the Census of 2000: Fulton had 5,501 Housing Units, a population of 11,855 people and a land area of 3.82 square miles [9.9 km²]. This gives a density of 2.16 people per Housing Unit and 1,156 Housing Units per square mile [446.6 housing units/km²].
    • Note: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2010 Census and the 2000 Census, there were changes in the sampling area for Fulton and you need to be careful when comparing results between the censuses. More information about the changes can be found in the section called Census-to-Census Observations ... (see below).

Oswego County ...

The community of Fulton is located in Oswego County<4>.

The county had a population of 122,109 people at the 2010 Census. With it's population of 11,896 people, Fulton represented 9.74% of the county's total.

In addition, where the city of Fulton has a population density of 2,501 people per square mile [965 people/km²], Oswego County averages 128.3 people per square mile [49.54 people/km²].

For more information, please visit our Census Page for Oswego County.

Census-to-Census Observations ...

Introduction ...

When the Census Bureau takes a census count (or enumeration) for Fulton, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Fulton. It's important to note that from one Census to the next, the shape and location of the polygon can change.

  • Continue Reading ...
    • Although we don't have specific information about the shape of the polygon for Fulton or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
    • If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.

Location ...

While generally coinciding with the GPS location (latitude/longitude) of Fulton, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Fulton.

  • Continue Reading ...
    • For the 2010 Census, the location was given as:
    • Lat:   43.303807°   (or 43°18'13" N)
    • Lon:   -76.399242°   (or -76°23'57" W)
    • For the 2000 Census, the location given was:
    • Lat:   43.319878°   (or 43°19'11" N)
    • Lon:   -76.413224°   (or -76°24'47" W)
    • The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 6,934 feet to the southeast<5> of the location that was used in the 2000 Census.
    • The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#978979) to Fulton. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Fulton. The GNIS point has been mapped to the latitude/longitude:
    • Lat:   43.316735°   (or 43°19'0" N)
    • Lon:   -76.415214°   (or -76°24'54" W)
    • The GPS location given for the 2010 Census lies 6,337 feet to the southeast<6> of the point given by the GNIS for Fulton. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Fulton.

Miscellaneous Information for Fulton ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Oswego County or the city of Fulton:

  • The GNIS Codes ...
    • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Fulton:
    • GNIS ID for Fulton: 978979
    • GNIS ID for Oswego County: 974136
    • GNIS ID for State of New York: 1779796
  • The FIPS Codes ...
    • An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
    • State Code: 36 (New York)
    • County Code: 075 (Oswego County)
    • Place Code: 27815 (Fulton)
    • State & County Code: 36/075 (New York / Oswego County)
    • State & Place Code: 36/27815 (New York / Fulton)
  • Misc. Census Codes ...
    • Fulton is located in Census Region #1 (the Northeast Region) and Division #2 (the Middle Atlantic Division).

For more information about the various Federal identification codes, please visit our Misc Page for Fulton.

Other Roadside Stops ...

Visit our Community Index for New York

About Oswego County

About New York

Off-the-Road Links ...

The official website for Fulton:

The official website for Oswego County:

The official website for State of New York:

The official website of the U.S. Census Bureau

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Footnotes ...

<1>Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019.
<2>Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.
<3>A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).
<4>If you're interested in how the shape of New York's counties, including Oswego, have changed over time, we recommend the Atlas of Historical County Boundaries.
<5>The calculated bearing (or angle) to the 2010 Census location is 212 degrees and a distance of 6,934 feet.
<6>The calculated bearing (or angle) to the GNIS point is 221 degrees and a distance of 6,337 feet.






Sitemap Privacy
of Use



Copyright 2020
All Rights Reserved

Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.

This page was last modified: 25 Jul 2022