Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Kenna Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Kenna Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Kenna Cemetery. We've listed the following communities based on their distance, with the closest first.
- Kenna
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for Kenna
- Kenna is located in Roosevelt County
- Elida
(9 miles [14.5 km] to the northeast)
- Dora
(25 miles [40.2 km] to the east)
- Milnesand
(28 miles [45.1 km] to the southeast)
- Floyd
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Floyd have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Floyd
- Floyd is located in Roosevelt County
- Population from the 2020 Census: 103 people
- Jump to TripAdvisor's Tourism page for Floyd <2>
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Kenna Cemetery. The point we use is located at these GPS coordinates - Latitude: 33.8423, Longitude: -103.7719 In this case, the coordinates for the Kenna Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |