RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of New Hampshire >> Cheshire County >> Mill Village >> Census DataIndex...










Learn About
The Commemorative
Quarter for
New Hampshire


The Commemorative Quarter for New Hampshire







Census Data for Mill Village

As far as we can tell, Mill Village has not been included in past Census counts, so there is no population information for this community.

While we don't have census information for Mill Village, you might be interested in some nearby communities where we do:

  • Stoddard
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for Stoddard have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stoddard
    • Stoddard is located in Cheshire County
    • Jump to TripAdvisor's Tourism page for Stoddard <2>
  • Windsor
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Windsor have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Windsor
    • Windsor is located in Hillsborough County
  • Marlow
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Marlow have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marlow
    • Marlow is located in Cheshire County
  • Nelson
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for Nelson
    • Nelson is located in Cheshire County
  • Washington
    (6 miles [9.7 km] to the north)
  • Sullivan
    (7 miles [11.3 km] to the southwest)
  • Antrim
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Antrim have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Antrim
    • Antrim is located in Hillsborough County
    • Jump to TripAdvisor's Tourism page for Antrim <2>
  • Gilsum
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Gilsum have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gilsum
    • Gilsum is located in Cheshire County
    • Jump to TripAdvisor's Tourism page for Gilsum <2>
  • Bennington
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Bennington have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bennington
    • Bennington is located in Hillsborough County
    • Jump to TripAdvisor's Tourism page for Bennington <2>
  • Hancock
    (9 miles [14.5 km] to the southeast)
  • Harrisville
    (9 miles [14.5 km] to the south)
  • Roxbury
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Roxbury have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roxbury
    • Roxbury is located in Cheshire County
  • Continue List   (387 more) ...
    • Hillsboro
      (10 miles [16.1 km] to the east)
    • Dublin
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dublin
      • Dublin is located in Cheshire County
      • Jump to TripAdvisor's Tourism page for Dublin <2>
    • Lempster
      (11 miles [17.7 km] to the northwest)
      • Jump to our Gazetteer entry for Lempster
      • Lempster is located in Sullivan County

Cheshire County ...

Mill Village is located in Cheshire County<3>.

For more information, please visit our Census Page for Cheshire County.

Miscellaneous Information for Mill Village ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Cheshire County or the community of Mill Village:

  • The GNIS Codes ...
    • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Mill Village:
    • GNIS ID for Mill Village: 868452
    • GNIS ID for Cheshire County: 873176
    • GNIS ID for State of New Hampshire: 1779794
  • Misc. Census Codes ...
    • Mill Village is located in Census Region #1 (the Northeast Region) and Division #1 (the New England Division).

For more information about the various Federal identification codes, please visit our Misc Page for Mill Village.

Unfortunately, we don't know of a website for Mill Village. If you can help, please contact us through our Feedback Page.

The official website for Cheshire County: www.co.cheshire.nh.us/

The official website for State of New Hampshire: https://www.nh.gov/

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>If you're interested in how the shape of New Hampshire's counties, including Cheshire, have changed over time, we recommend the Atlas of Historical County Boundaries.









 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 20 Mar 2025