RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of New Hampshire >> Hillsborough County >> Loverens Mill >> Census DataIndex...










Learn About
The Commemorative
Quarter for
New Hampshire


The Commemorative Quarter for New Hampshire







Census Data for Loverens Mill

As far as we can tell, Loverens Mill<1> has not been included in past Census counts, so there is no population information for this community.

While we don't have census information for Loverens Mill, you might be interested in some nearby communities where we do:

  • Windsor
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for Windsor have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Windsor
    • Windsor is located in Hillsborough County
  • Antrim
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Antrim have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Antrim
    • Antrim is located in Hillsborough County
    • Jump to TripAdvisor's Tourism page for Antrim <3>
  • Stoddard
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Stoddard have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stoddard
    • Stoddard is located in Cheshire County
    • Jump to TripAdvisor's Tourism page for Stoddard <3>
  • Bennington
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Bennington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bennington
    • Bennington is located in Hillsborough County
    • Jump to TripAdvisor's Tourism page for Bennington <3>
  • Hillsboro
    (6 miles [9.7 km] to the northeast)
  • Hancock
    (7 miles [11.3 km] to the south)
  • Nelson
    (7 miles [11.3 km] to the southwest)
    • Jump to our Gazetteer entry for Nelson
    • Nelson is located in Cheshire County
  • Deering
    (8 miles [12.9 km] to the east)
    • Jump to our Gazetteer entry for Deering
    • Deering is located in Hillsborough County
  • Washington
    (8 miles [12.9 km] to the northwest)
  • Harrisville
    (9 miles [14.5 km] to the southwest)
  • Marlow
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Marlow have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marlow
    • Marlow is located in Cheshire County
  • Dublin
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dublin
    • Dublin is located in Cheshire County
    • Jump to TripAdvisor's Tourism page for Dublin <3>
  • Continue List   (364 more) ...
    • Francestown
      (11 miles [17.7 km] to the southeast)
    • Greenfield
      (11 miles [17.7 km] to the southeast)
    • Roxbury
      (11 miles [17.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Roxbury have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roxbury
      • Roxbury is located in Cheshire County

Hillsborough County ...

Loverens Mill is located in Hillsborough County<4>.

For more information, please visit our Census Page for Hillsborough County.

Miscellaneous Information for Loverens Mill ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Hillsborough County or the community of Loverens Mill:

  • The GNIS Codes ...
    • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Loverens Mill:
    • GNIS ID for Loverens Mill: 871202
    • GNIS ID for Hillsborough County: 873179
    • GNIS ID for State of New Hampshire: 1779794
  • Misc. Census Codes ...
    • Loverens Mill is located in Census Region #1 (the Northeast Region) and Division #1 (the New England Division).

For more information about the various Federal identification codes, please visit our Misc Page for Loverens Mill.

Unfortunately, we don't know of a website for Loverens Mill. If you can help, please contact us through our Feedback Page.

The official website for Hillsborough County: www.hillsboroughcountynh.org/

The official website for State of New Hampshire: https://www.nh.gov/

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Footnotes ...

<1>It's a common practice for mapmakers to remove the apostrophe from possessive names. So Loverens Mill may originally have been Loveren's Mill. Sometimes the trailing 's' might be dropped altogether, in which case Loverens Mill might be written as Loveren Mill. For more information, please visit our Genealogy Helper Page for Loverens Mill.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>If you're interested in how the shape of New Hampshire's counties, including Hillsborough, have changed over time, we recommend the Atlas of Historical County Boundaries.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024