|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hubbard Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hubbard Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hubbard Cemetery. We've listed the following communities based on their distance, with the closest first.
- Sandwich
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for Sandwich
- Sandwich is located in Carroll County
- Population from the 2020 Census: 1,367 people
- North Sandwich
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for North Sandwich. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for North Sandwich
- North Sandwich is located in Carroll County
- Jump to TripAdvisor's Tourism page for North Sandwich <3>
- South Tamworth
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for South Tamworth
- South Tamworth is located in Carroll County
- Big Rock Corner
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for Big Rock Corner
- Big Rock Corner is located in Carroll County
- Whiteface
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for Whiteface
- Whiteface is located in Carroll County
- Whittier
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for Whittier
- Whittier is located in Carroll County
- Chicks Corner
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for Chicks Corner
- Chicks Corner is located in Carroll County
- Melvin Village
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Melvin Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Melvin Village
- Melvin Village is located in Carroll County
- Jump to TripAdvisor's Tourism page for Melvin Village <3>
- Tamworth
(7 miles [11.3 km] to the northeast)
- Wonalancet
(8 miles [12.9 km] to the north)
- Jump to our Gazetteer entry for Wonalancet
- Wonalancet is located in Carroll County
- Ferncroft
(8 miles [12.9 km] to the north)
- Jump to our Gazetteer entry for Ferncroft
- Ferncroft is located in Carroll County
- Waterville Valley
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Waterville Valley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waterville Valley
- Waterville Valley is located in Grafton County
- Population from the 2020 Census: 242 people
- Jump to TripAdvisor's Tourism page for Waterville Valley <3>
- Chocorua
(9 miles [14.5 km] to the northeast)
- Federal Corner
(10 miles [16.1 km] to the southeast)
- Jump to our Gazetteer entry for Federal Corner
- Federal Corner is located in Carroll County
- Chickville
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Chickville
- Chickville is located in Carroll County
- Holderness
(11 miles [17.7 km] to the west)
- Meredith
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Meredith have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meredith
- Meredith is located in Belknap County
- Population from the 2020 Census: 6,476 people
- Jump to TripAdvisor's Tourism page for Meredith <3>
- Water Village
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Water Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Water Village
- Water Village is located in Carroll County
- Silver Lake
(11 miles [17.7 km] to the northeast)
- Interlaken Park
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Interlaken Park
- Interlaken Park is located in Belknap County
- Stockbridge Corner
(13 miles [20.9 km] to the southeast)
- Jump to our Gazetteer entry for Stockbridge Corner
- Stockbridge Corner is located in Carroll County
- Madison
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Madison have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madison
- Madison is located in Carroll County
- Population from the 2020 Census: 2,632 people
- Jump to TripAdvisor's Tourism page for Madison <3>
- Ashland
(14 miles [22.5 km] to the southwest)
- Glendale
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Glendale
- Glendale is located in Belknap County
- Wolfeboro Center
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Wolfeboro Center
- Wolfeboro Center is located in Carroll County
- North Wolfeboro
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for North Wolfeboro. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for North Wolfeboro
- North Wolfeboro is located in Carroll County
- Ossipee
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Ossipee have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ossipee
- Ossipee is located in Carroll County
- Population from the 2020 Census: 4,383 people
- Jump to TripAdvisor's Tourism page for Ossipee <3>
- East Madison
(14 miles [22.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for East Madison. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for East Madison
- East Madison is located in Carroll County
- Passaconaway
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Passaconaway. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Passaconaway
- Passaconaway is located in Carroll County
- Campton Upper Village
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Campton Upper Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campton Upper Village
- Campton Upper Village is located in Grafton County
- Campton Lower Village
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Campton Lower Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campton Lower Village
- Campton Lower Village is located in Grafton County
Off-the-Road Links ...
The official website for State of New Hampshire: https://www.nh.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hubbard Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.7856, Longitude: -71.3623 In this case, the coordinates for the Hubbard Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|