|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Appleton Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Appleton Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Appleton Cemetery. We've listed the following communities based on their distance, with the closest first.
- Hillsboro
(Less than 2 miles to the northwest)
- Holton
(Less than 2 miles to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Holton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Holton
- Holton is located in Hillsborough County
- Google driving directions:
- From your current location to Holton
- From the Appleton Cemetery to Holton
- Deering
(2 miles [3.2 km] to the southeast)
- Hillsboro Center
(3 miles [4.8 km] to the northwest)
- Hillsboro Lower Village
(3 miles [4.8 km] to the west)
- North Branch
(4 miles [6.4 km] to the west)
- East Deering
(4 miles [6.4 km] to the southeast)
- Hillsboro Upper Village
(4 miles [6.4 km] to the west)
- Antrim Center
(5 miles [8 km] to the southwest)
- Clinton Village
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Clinton Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clinton Village
- Clinton Village is located in Hillsborough County
- Antrim
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Antrim have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Antrim
- Antrim is located in Hillsborough County
- Population from the 2020 Census: 2,682 people
- Jump to TripAdvisor's Tourism page for Antrim <2>
- Slab City
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Slab City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Slab City
- Slab City is located in Hillsborough County
- Chase Village
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Chase Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chase Village
- Chase Village is located in Hillsborough County
- Henniker
(6 miles [9.7 km] to the northeast)
- Windsor
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Windsor have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windsor
- Windsor is located in Hillsborough County
- Population from the 2020 Census: 232 people
- Weare
(7 miles [11.3 km] to the east)
- North Weare
(7 miles [11.3 km] to the east)
- Francestown
(8 miles [12.9 km] to the southeast)
- Elmwood
(9 miles [14.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Elmwood. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elmwood
- Elmwood is located in Hillsborough County
- Google driving directions:
- From your current location to Elmwood
- From the Appleton Cemetery to Elmwood
- Hancock
(10 miles [16.1 km] to the southwest)
- Greenfield
(10 miles [16.1 km] to the south)
- Tavern Village
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Tavern Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tavern Village
- Tavern Village is located in Hillsborough County
- Mill Village
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Mill Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Village
- Mill Village is located in Cheshire County
- Bradford
(11 miles [17.7 km] to the north)
- Contoocook
(11 miles [17.7 km] to the northeast)
- Washington
(11 miles [17.7 km] to the northwest)
- Melvin Mills
(11 miles [17.7 km] to the north)
- Stoddard
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Stoddard have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stoddard
- Stoddard is located in Cheshire County
- Population from the 2020 Census: 1,254 people
- Jump to TripAdvisor's Tourism page for Stoddard <2>
Off-the-Road Links ...
The official website for Hillsborough County: www.hillsboroughcountynh.org/ The official website for State of New Hampshire: https://www.nh.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Appleton Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.1041, Longitude: -71.8861 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|