RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Dakota >> Traill County >> Murray >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
North Dakota

The Commemorative Quarter for North Dakota





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that in 1895, Murray had railroad service and no post office.

The following communities are listed based on their distance from Murray, with the one closest to Murray listed first.

  • Mayville
    (5 miles [8 km] to the northwest)
  • Roseville
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for Roseville
    • Roseville is located in Traill County
  • Blanchard
    (6 miles [9.7 km] to the southeast)
  • Portland
    (6 miles [9.7 km] to the northwest)
  • Clifford
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Clifford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clifford
    • Clifford is located in Traill County
    • Population from the 2020 Census: 43 people
    • Jump to TripAdvisor's Tourism page for Clifford <2>
  • Hillsboro
    (10 miles [16.1 km] to the east)
    • Note: The GPS coordinates that we are using for Hillsboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hillsboro
    • Hillsboro is located in Traill County
    • Population from the 2020 Census: 1,624 people
    • Jump to TripAdvisor's Tourism page for Hillsboro <2>
  • Cummings
    (10 miles [16.1 km] to the northeast)
  • Greenfield
    (11 miles [17.7 km] to the south)
    • Note: We haven't been able to verify our GPS coordinates for Greenfield. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Greenfield
    • Greenfield is located in Traill County
  • Alton
    (11 miles [17.7 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Alton. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Alton
    • Alton is located in Traill County
  • Galesburg
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Galesburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Galesburg
    • Galesburg is located in Traill County
    • Population from the 2020 Census: 101 people
    • Jump to TripAdvisor's Tourism page for Galesburg <2>
  • Kelso
    (13 miles [20.9 km] to the southeast)
    • Jump to our Gazetteer entry for Kelso
    • Kelso is located in Traill County
  • Buxton
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Buxton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buxton
    • Buxton is located in Traill County
    • Population from the 2020 Census: 316 people
    • Jump to TripAdvisor's Tourism page for Buxton <2>
  • Hunter
    (16 miles [25.7 km] to the south)
    • Note: We haven't been able to verify our GPS coordinates for Hunter. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Hunter
    • Hunter is located in Cass County
    • Population from the 2020 Census: 251 people
    • Jump to TripAdvisor's Tourism page for Hunter <2>
  • Hatton
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Hatton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hatton
    • Hatton is located in Traill County
    • Population from the 2020 Census: 731 people
    • Jump to TripAdvisor's Tourism page for Hatton <2>
  • Grandin
    (18 miles [29 km] to the southeast)
    • Note: The GPS coordinates that we are using for Grandin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grandin
    • Grandin is located in Traill County
    • Population from the 2020 Census: 171 people
    • Jump to TripAdvisor's Tourism page for Grandin <2>
  • Caledonia
    (18 miles [29 km] to the east)
  • Reynolds
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Reynolds have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Reynolds
    • Reynolds is located in Grand Forks County
    • Population from the 2020 Census: 299 people
    • Jump to TripAdvisor's Tourism page for Reynolds <2>
  • Holmes
    (20 miles [32.2 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Holmes. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Holmes
    • Holmes is located in Grand Forks County
  • Hope
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Hope have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hope
    • Hope is located in Steele County
    • Population from the 2020 Census: 250 people
    • Jump to TripAdvisor's Tourism page for Hope <2>
  • Colgate
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Colgate have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Colgate
    • Colgate is located in Steele County
  • Halstad
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for Halstad have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Halstad
    • Halstad is located in Norman County (MN)
    • Population from the 2020 Census: 548 people
    • Jump to TripAdvisor's Tourism page for Halstad <2>
  • Sherbrooke
    (21 miles [33.8 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Sherbrooke. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Sherbrooke
    • Sherbrooke is located in Steele County
  • Arthur
    (22 miles [35.4 km] to the south)
  • Nielsville
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for Nielsville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nielsville
    • Nielsville is located in Polk County (MN)
    • Population from the 2020 Census: 82 people
  • Page
    (23 miles [37 km] to the southwest)

The official website for State of North Dakota: https://www.nd.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Murray, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 25 Mar 2025