RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Dakota >> Benson County >> Wilmerth Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
North Dakota

The Commemorative Quarter for North Dakota





Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Wilmerth Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Wilmerth Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Wilmerth Cemetery. We've listed the following communities based on their distance, with the closest first.

  • Brinsmade
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Brinsmade have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brinsmade
    • Brinsmade is located in Benson County
    • Population from the 2020 Census: 34 people
    • Jump to TripAdvisor's Tourism page for Brinsmade <3>
  • Leeds
    (5 miles [8 km] to the north)
  • Niles
    (5 miles [8 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Niles. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Niles
    • Niles is located in Benson County
  • York
    (9 miles [14.5 km] to the northwest)
  • Churchs Ferry
    (10 miles [16.1 km] to the east)
    • Note: The GPS coordinates that we are using for Churchs Ferry have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Churchs Ferry
    • Churchs Ferry is located in Ramsey County
    • Population from the 2020 Census: 12 people
    • Jump to TripAdvisor's Tourism page for Churchs Ferry <3>
  • Minnewaukan
    (12 miles [19.3 km] to the southeast)
  • Penn
    (14 miles [22.5 km] to the east)
  • Isabel
    (15 miles [24.1 km] to the southwest)
  • Maza
    (15 miles [24.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Maza have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maza
    • Maza is located in Towner County
  • Knox
    (15 miles [24.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Knox have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Knox
    • Knox is located in Benson County
    • Population from the 2020 Census: 24 people
    • Jump to TripAdvisor's Tourism page for Knox <3>
  • Maddock
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Maddock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maddock
    • Maddock is located in Benson County
    • Population from the 2020 Census: 375 people
    • Jump to TripAdvisor's Tourism page for Maddock <3>
  • Grand Harbor
    (19 miles [30.6 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Grand Harbor. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Grand Harbor
    • Grand Harbor is located in Ramsey County
  • Esmond
    (20 miles [32.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Esmond have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Esmond
    • Esmond is located in Benson County
    • Population from the 2020 Census: 94 people
    • Jump to TripAdvisor's Tourism page for Esmond <3>
  • Pleasant Lake
    (20 miles [32.2 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Pleasant Lake. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Pleasant Lake
    • Pleasant Lake is located in Benson County
  • Cando
    (21 miles [33.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Cando have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cando
    • Cando is located in Towner County
    • Population from the 2020 Census: 1,008 people
    • Jump to TripAdvisor's Tourism page for Cando <3>
  • Oberon
    (22 miles [35.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Oberon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oberon
    • Oberon is located in Benson County
    • Population from the 2020 Census: 101 people
    • Jump to TripAdvisor's Tourism page for Oberon <3>
  • Wolford
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Wolford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wolford
    • Wolford is located in Pierce County
    • Population from the 2020 Census: 32 people
    • Jump to TripAdvisor's Tourism page for Wolford <3>
  • Fort Totten
    (25 miles [40.2 km] to the southeast)
  • Webster
    (25 miles [40.2 km] to the east)
  • Devils Lake
    (26 miles [41.8 km] to the east)
  • Garske
    (26 miles [41.8 km] to the east)
    • Jump to our Gazetteer entry for Garske
    • Garske is located in Ramsey County
  • Bisbee
    (28 miles [45.1 km] to the north)
    • Note: The GPS coordinates that we are using for Bisbee have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bisbee
    • Bisbee is located in Towner County
    • Population from the 2020 Census: 120 people
    • Jump to TripAdvisor's Tourism page for Bisbee <3>
  • Rugby
    (28 miles [45.1 km] to the west)
  • Agate
    (28 miles [45.1 km] to the north)
  • Balta
    (28 miles [45.1 km] to the west)
    • Note: The GPS coordinates that we are using for Balta have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Balta
    • Balta is located in Pierce County
    • Population from the 2020 Census: 58 people
    • Jump to TripAdvisor's Tourism page for Balta <3>

The official website for State of North Dakota: https://www.nd.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Wilmerth Cemetery. The point we use is located at these GPS coordinates - Latitude: 48.2156, Longitude: -99.4140       In this case, the coordinates for the Wilmerth Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025