RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Dakota >> Steele County >> Ebenezer Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
North Dakota

The Commemorative Quarter for North Dakota





Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Ebenezer Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Ebenezer Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Ebenezer Cemetery. We've listed the following cemeteries based on their distance, with the closest first.

  • Finley
    (Less than 2 miles to the south)
  • Sharon
    (5 miles [8 km] to the northwest)
  • Sherbrooke
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Sherbrooke have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sherbrooke
    • Sherbrooke is located in Steele County
  • Aneta
    (12 miles [19.3 km] to the northwest)
  • Cooperstown
    (14 miles [22.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Cooperstown have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cooperstown
    • Cooperstown is located in Griggs County
    • Population from the 2020 Census: 891 people
    • Jump to TripAdvisor's Tourism page for Cooperstown <2>
  • Hope
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Hope have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hope
    • Hope is located in Steele County
    • Population from the 2020 Census: 250 people
    • Jump to TripAdvisor's Tourism page for Hope <2>
  • Hatton
    (18 miles [29 km] to the east)
    • Note: The GPS coordinates that we are using for Hatton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hatton
    • Hatton is located in Traill County
    • Population from the 2020 Census: 731 people
    • Jump to TripAdvisor's Tourism page for Hatton <2>
  • Northwood
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Northwood have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Northwood
    • Northwood is located in Grand Forks County
    • Population from the 2020 Census: 884 people
    • Jump to TripAdvisor's Tourism page for Northwood <2>
  • Jessie
    (18 miles [29 km] to the west)
  • Luverne
    (20 miles [32.2 km] to the south)
    • Note: The GPS coordinates that we are using for Luverne have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Luverne
    • Luverne is located in Steele County
    • Population from the 2020 Census: 29 people
    • Jump to TripAdvisor's Tourism page for Luverne <2>
  • Roseville
    (21 miles [33.8 km] to the east)
    • Jump to our Gazetteer entry for Roseville
    • Roseville is located in Traill County
  • Portland
    (21 miles [33.8 km] to the east)
  • Hannaford
    (22 miles [35.4 km] to the southwest)
  • Sibley
    (22 miles [35.4 km] to the south)
    • Note: The GPS coordinates that we are using for Sibley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sibley
    • Sibley is located in Barnes County
    • Population from the 2020 Census: 28 people
  • Pillsbury
    (22 miles [35.4 km] to the south)
    • Note: The GPS coordinates that we are using for Pillsbury have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pillsbury
    • Pillsbury is located in Barnes County
    • Population from the 2020 Census: 11 people
  • Kempton
    (22 miles [35.4 km] to the northeast)
    • Jump to our Gazetteer entry for Kempton
    • Kempton is located in Grand Forks County
  • McVille
    (22 miles [35.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for McVille have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McVille
    • McVille is located in Nelson County
    • Population from the 2020 Census: 313 people
    • Jump to TripAdvisor's Tourism page for McVille <2>
  • Clifford
    (23 miles [37 km] to the southeast)
    • Note: The GPS coordinates that we are using for Clifford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clifford
    • Clifford is located in Traill County
    • Population from the 2020 Census: 43 people
    • Jump to TripAdvisor's Tourism page for Clifford <2>
  • Mayville
    (23 miles [37 km] to the east)
  • Binford
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for Binford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Binford
    • Binford is located in Griggs County
    • Population from the 2020 Census: 166 people
    • Jump to TripAdvisor's Tourism page for Binford <2>
  • Walum
    (24 miles [38.6 km] to the southwest)
    • Jump to our Gazetteer entry for Walum
    • Walum is located in Griggs County
  • Galesburg
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Galesburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Galesburg
    • Galesburg is located in Traill County
    • Population from the 2020 Census: 101 people
    • Jump to TripAdvisor's Tourism page for Galesburg <2>
  • Larimore
    (27 miles [43.5 km] to the north)
  • Page
    (28 miles [45.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Page have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Page
    • Page is located in Cass County
    • Population from the 2020 Census: 229 people
    • Jump to TripAdvisor's Tourism page for Page <2>
  • Holmes
    (28 miles [45.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Holmes have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Holmes
    • Holmes is located in Grand Forks County
  • Pekin
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Pekin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pekin
    • Pekin is located in Nelson County
    • Population from the 2020 Census: 63 people
    • Jump to TripAdvisor's Tourism page for Pekin <2>

The official website for State of North Dakota: www.nd.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Ebenezer Cemetery. The point we use is located at these GPS coordinates - Latitude: 47.5361, Longitude: -97.8359       In this case, the coordinates for the Ebenezer Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024