RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Johnston County >> WestviewIndex...

Welcome to Westview ...

Westview is located in Johnston County<1>.

Westview is 140 feet [43 m] above sea level.<2>.

Time Zone: Westview lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time

Area Codes for Westview: 919 & 984<3>

Communities Also Named Westview ...

While we believe that this Westview is located in Johnston County, we know of another 2 North Carolina communities named Westview. Those communities are located in the following counties: Alamance and Forsyth County.

Beyond North Carolina, there are 30 communities that are also named Westview - they are located in Alabama (2), British Columbia, Colorado, Delaware, Florida, Georgia (2), Illinois, Indiana, Iowa, Kentucky, Maryland, Massachusetts, Missouri, New York (2), Ohio (3), Ontario (3), Saskatchewan, Tennessee, Texas, Utah and Virginia.

For more information, see our Tidbits & Trivia Page for Westview.

Communities near Westview ...

We have created a list of 10 communities that are near Westview.

  • Garner
    (18 miles [29 km] to the northwest)
  • Clayton
    (9 miles [14.5 km] to the northwest)
  • Knightdale
    (19 miles [30.6 km] to the north)
  • Wendell
    (17 miles [27.4 km] to the north)
  • Selma
    (4 miles [6.4 km] to the east)
    • Selma is located in Johnston County
    • Jump to our Gazetteer entry for Selma
    • Population from the 2020 Census: 7,323 people
    • Jump to TripAdvisor's Tourism page for Selma <4>
  • Archer Lodge
    (11 miles [17.7 km] to the north)
    • Archer Lodge is located in Johnston County
    • Jump to our Gazetteer entry for Archer Lodge
    • Population from the 2020 Census: 5,322 people
    • Archer Lodge has also been known as:
    • Archer
  • Benson
    (14 miles [22.5 km] to the southwest)
  • Wilson's Mills
    (3 miles [4.8 km] to the north)
    • Wilson's Mills is located in Johnston County
    • Jump to our Gazetteer entry for Wilson's Mills
    • Population from the 2020 Census: 2,847 people
  • Coats
    (18 miles [29 km] to the southwest)
    • Coats is located in Harnett County
    • Jump to our Gazetteer entry for Coats
    • Population from the 2020 Census: 2,520 people
    • Jump to TripAdvisor's Tourism page for Coats <4>
  • Four Oaks
    (6 miles [9.7 km] to the southwest)

To Help With Your Genealogy Research ...

We have a couple of sections for those tracing their genealogy.

We created a list of cemeteries that are in the area around Westview. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Westview.

Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Westview. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Westview.

We also have a detailed list of newspapers that have been published in the area around Westview. See our Newspapers Page for Westview.

TripAdvisor Tourism Pages for Westview ...

Looking for more information about Westview? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.

While we are unaware of a Tourism page that is specific to Westview, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Westview.

Footnotes ...

<1>If you're interested in how the shape of North Carolina's counties, including Johnston, have changed over time, we recommend the Atlas of Historical County Boundaries.
<2>The elevation is an estimate for the area around Westview - it will be higher in some places and lower in others.
<3>When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 919 code has been Overlayed with the 984 area code. New phone numbers in the Westview area will be assigned with one of these codes: 919 or 984. As a result, placing a call in the Westview area will require 10-digit dialing (where you enter both the area code and then the phone number).
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.