RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Rutherford County >> Union Mills >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Union Mills. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Union Mills.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Union Mills - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 46 communities listed:

  • Bat Cave
    (18 miles [29 km] to the west)
  • Black Mountain
    (22 miles [35.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Black Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Black Mountain
    • Black Mountain is located in Buncombe County
    • Population from the 2020 Census: 8,256 people
    • Jump to TripAdvisor's Tourism page for Black Mountain <2>
  • Boiling Springs
    (23 miles [37 km] to the southeast)
  • Boiling Springs
    (30 miles [48.3 km] to the south)
  • Bostic
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Bostic have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bostic
    • Bostic is located in Rutherford County
    • Population from the 2020 Census: 379 people
    • Jump to TripAdvisor's Tourism page for Bostic <2>
  • Campobello
    (27 miles [43.5 km] to the south)
  • Casar
    (19 miles [30.6 km] to the east)
    • Jump to our Gazetteer entry for Casar
    • Casar is located in Cleveland County
    • Population from the 2020 Census: 292 people
    • Jump to TripAdvisor's Tourism page for Casar <2>
  • Chesnee
    (24 miles [38.6 km] to the south)
    • Jump to our Gazetteer entry for Chesnee
    • Chesnee is located in Cherokee County (SC)
    • Population from the 2020 Census: 942 people
    • Jump to TripAdvisor's Tourism page for Chesnee <2>
  • Chimney Rock
    (16 miles [25.7 km] to the west)
  • Columbus
    (20 miles [32.2 km] to the southwest)
  • Connelly Springs
    (30 miles [48.3 km] to the northeast)
  • East Flat Rock
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for East Flat Rock have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Flat Rock
    • East Flat Rock is located in Henderson County
    • Jump to TripAdvisor's Tourism page for East Flat Rock <2>
  • Ellenboro
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Ellenboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ellenboro
    • Ellenboro is located in Rutherford County
    • Population from the 2020 Census: 830 people
    • Jump to TripAdvisor's Tourism page for Ellenboro <2>
  • Fairview
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairview
    • Fairview is located in Buncombe County
    • Jump to TripAdvisor's Tourism page for Fairview <2>
  • Fallston
    (26 miles [41.8 km] to the east)
    • Note: The GPS coordinates that we are using for Fallston have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fallston
    • Fallston is located in Cleveland County
    • Population from the 2020 Census: 610 people
    • Jump to TripAdvisor's Tourism page for Fallston <2>
  • Fingerville
    (24 miles [38.6 km] to the south)
  • Flat Rock
    (30 miles [48.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Flat Rock have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Flat Rock
    • Flat Rock is located in Henderson County
    • Population from the 2020 Census: 3,408 people
    • Jump to TripAdvisor's Tourism page for Flat Rock <2>
  • Fletcher
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Fletcher have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fletcher
    • Fletcher is located in Henderson County
    • Population from the 2020 Census: 8,439 people
    • Jump to TripAdvisor's Tourism page for Fletcher <2>
  • Forest City
    (12 miles [19.3 km] to the southeast)
  • Gerton
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Gerton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gerton
    • Gerton is located in Henderson County
    • Jump to TripAdvisor's Tourism page for Gerton <2>
  • Glen Alpine
    (19 miles [30.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Glen Alpine have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glen Alpine
    • Glen Alpine is located in Burke County
    • Population from the 2020 Census: 1,487 people
    • Jump to TripAdvisor's Tourism page for Glen Alpine <2>
  • Gramling
    (29 miles [46.7 km] to the south)
  • Hendersonville
    (30 miles [48.3 km] to the southwest)
  • Lake Lure
    (13 miles [20.9 km] to the west)
    • Note: The GPS coordinates that we are using for Lake Lure have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Lure
    • Lake Lure is located in Rutherford County
    • Population from the 2020 Census: 1,153 people
    • Jump to TripAdvisor's Tourism page for Lake Lure <2>
  • Landrum
    (25 miles [40.2 km] to the southwest)
    • Jump to our Gazetteer entry for Landrum
    • Landrum is located in Spartanburg County (SC)
    • Population from the 2020 Census: 2,725 people
    • Jump to TripAdvisor's Tourism page for Landrum <2>
  • Lawndale
    (23 miles [37 km] to the east)
    • Note: The GPS coordinates that we are using for Lawndale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lawndale
    • Lawndale is located in Cleveland County
    • Population from the 2020 Census: 589 people
    • Jump to TripAdvisor's Tourism page for Lawndale <2>
  • Little Switzerland
    (25 miles [40.2 km] to the north)
    • Note: The GPS coordinates that we are using for Little Switzerland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Little Switzerland
    • Little Switzerland is located in McDowell County
    • Jump to TripAdvisor's Tourism page for Little Switzerland <2>
  • Marion
    (13 miles [20.9 km] to the north)
    • Note: The GPS coordinates that we are using for Marion have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marion
    • Marion is located in McDowell County
    • Population from the 2020 Census: 7,937 people
    • Jump to TripAdvisor's Tourism page for Marion <2>
  • Mayo
    (28 miles [45.1 km] to the south)
  • Mill Spring
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Mill Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mill Spring
    • Mill Spring is located in Polk County
    • Jump to TripAdvisor's Tourism page for Mill Spring <2>
  • Montreat
    (21 miles [33.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Montreat have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montreat
    • Montreat is located in Buncombe County
    • Population from the 2020 Census: 939 people
    • Jump to TripAdvisor's Tourism page for Montreat <2>
  • Morganton
    (22 miles [35.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Morganton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Morganton
    • Morganton is located in Burke County
    • Population from the 2020 Census: 16,625 people
    • Jump to TripAdvisor's Tourism page for Morganton <2>
  • Mountain Home
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Mountain Home have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mountain Home
    • Mountain Home is located in Henderson County
    • Jump to TripAdvisor's Tourism page for Mountain Home <2>
  • Nebo
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Nebo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nebo
    • Nebo is located in McDowell County
    • Jump to TripAdvisor's Tourism page for Nebo <2>
  • Old Fort
    (15 miles [24.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Old Fort have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Fort
    • Old Fort is located in McDowell County
    • Population from the 2020 Census: 924 people
    • Jump to TripAdvisor's Tourism page for Old Fort <2>
  • Ridgecrest
    (20 miles [32.2 km] to the northwest)
  • Rutherford College
    (30 miles [48.3 km] to the northeast)
  • Rutherfordton
    (8 miles [12.9 km] to the south)
  • Saluda
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Saluda have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saluda
    • Saluda is located in Henderson County
    • Population from the 2020 Census: 703 people
    • Jump to TripAdvisor's Tourism page for Saluda <2>
  • Shelby
    (27 miles [43.5 km] to the southeast)
    • Jump to our Gazetteer entry for Shelby
    • Shelby is located in Cleveland County
    • Population from the 2020 Census: 20,145 people
    • Jump to TripAdvisor's Tourism page for Shelby <2>
  • Spindale
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Spindale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spindale
    • Spindale is located in Rutherford County
    • Population from the 2020 Census: 4,175 people
    • Jump to TripAdvisor's Tourism page for Spindale <2>
  • Spruce Pine
    (30 miles [48.3 km] to the north)
  • Swannanoa
    (25 miles [40.2 km] to the west)
  • Tryon
    (24 miles [38.6 km] to the southwest)
  • Valdese
    (28 miles [45.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Valdese have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Valdese
    • Valdese is located in Burke County
    • Population from the 2020 Census: 4,407 people
    • Jump to TripAdvisor's Tourism page for Valdese <2>
  • Zirconia
    (30 miles [48.3 km] to the southwest)

Unfortunately, we don't know of an official website for Union Mills. If you can help, please contact us through our Feedback Page.

The official website for Rutherford County: www.rutherfordcountync.gov/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Union Mills) to Point B.Our distance measurements begin at a specific point in Union Mills. The point we use is located at these GPS coordinates - Latitude: 35.4881, Longitude: -81.9633    
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024