|
TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Old Fort. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Old Fort.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Old Fort - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 54 communities listed:
- Alexander
(26 miles [41.8 km] to the west)
- Arden
(21 miles [33.8 km] to the southwest)
- Asheville
(20 miles [32.2 km] to the west)
- Bakersville
(26 miles [41.8 km] to the north)
- Barnardsville
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Barnardsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnardsville
- Barnardsville is located in Buncombe County
- Jump to TripAdvisor's Tourism page for Barnardsville <2>
- Bat Cave
(13 miles [20.9 km] to the southwest)
- Black Mountain
(7 miles [11.3 km] to the west)
- Bostic
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Bostic have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bostic
- Bostic is located in Rutherford County
- Population from the 2020 Census: 379 people
- Jump to TripAdvisor's Tourism page for Bostic <2>
- Burnsville
(20 miles [32.2 km] to the north)
- Candler
(29 miles [46.7 km] to the west)
- Chimney Rock
(13 miles [20.9 km] to the south)
- Columbus
(25 miles [40.2 km] to the south)
- Crossnore
(30 miles [48.3 km] to the northeast)
- East Flat Rock
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for East Flat Rock have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Flat Rock
- East Flat Rock is located in Henderson County
- Jump to TripAdvisor's Tourism page for East Flat Rock <2>
- Enka
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Enka have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Enka
- Enka is located in Buncombe County
- Jump to TripAdvisor's Tourism page for Enka <2>
- Fairview
(14 miles [22.5 km] to the southwest)
- Flat Rock
(28 miles [45.1 km] to the southwest)
- Fletcher
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Fletcher have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fletcher
- Fletcher is located in Henderson County
- Population from the 2020 Census: 8,439 people
- Jump to TripAdvisor's Tourism page for Fletcher <2>
- Forest City
(27 miles [43.5 km] to the southeast)
- Gerton
(13 miles [20.9 km] to the southwest)
- Glen Alpine
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Glen Alpine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen Alpine
- Glen Alpine is located in Burke County
- Population from the 2020 Census: 1,487 people
- Jump to TripAdvisor's Tourism page for Glen Alpine <2>
- Green Mountain
(25 miles [40.2 km] to the north)
- Hendersonville
(26 miles [41.8 km] to the southwest)
- Horse Shoe
(28 miles [45.1 km] to the southwest)
- Jonas Ridge
(28 miles [45.1 km] to the northeast)
- Lake Lure
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Lake Lure have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Lure
- Lake Lure is located in Rutherford County
- Population from the 2020 Census: 1,153 people
- Jump to TripAdvisor's Tourism page for Lake Lure <2>
- Laurel Park
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Laurel Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laurel Park
- Laurel Park is located in Henderson County
- Population from the 2020 Census: 2,339 people
- Jump to TripAdvisor's Tourism page for Laurel Park <2>
- Leicester
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Leicester have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leicester
- Leicester is located in Buncombe County
- Jump to TripAdvisor's Tourism page for Leicester <2>
- Linville Falls
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Linville Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linville Falls
- Linville Falls is located in Avery County
- Jump to TripAdvisor's Tourism page for Linville Falls <2>
- Little Switzerland
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Little Switzerland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Switzerland
- Little Switzerland is located in McDowell County
- Jump to TripAdvisor's Tourism page for Little Switzerland <2>
- Marion
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Marion have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marion
- Marion is located in McDowell County
- Population from the 2020 Census: 7,937 people
- Jump to TripAdvisor's Tourism page for Marion <2>
- Mars Hill
(24 miles [38.6 km] to the northwest)
- Marshall
(30 miles [48.3 km] to the west)
- Micaville
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Micaville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Micaville
- Micaville is located in Yancey County
- Jump to TripAdvisor's Tourism page for Micaville <2>
- Mill Spring
(22 miles [35.4 km] to the south)
- Mills River
(27 miles [43.5 km] to the southwest)
- Montreat
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Montreat have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montreat
- Montreat is located in Buncombe County
- Population from the 2020 Census: 939 people
- Jump to TripAdvisor's Tourism page for Montreat <2>
- Morganton
(28 miles [45.1 km] to the east)
- Mountain Home
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Mountain Home have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountain Home
- Mountain Home is located in Henderson County
- Jump to TripAdvisor's Tourism page for Mountain Home <2>
- Nebo
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Nebo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nebo
- Nebo is located in McDowell County
- Jump to TripAdvisor's Tourism page for Nebo <2>
- Penland
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Penland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Penland
- Penland is located in Mitchell County
- Jump to TripAdvisor's Tourism page for Penland <2>
- Plumtree
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Plumtree have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plumtree
- Plumtree is located in Avery County
- Jump to TripAdvisor's Tourism page for Plumtree <2>
- Ridgecrest
(5 miles [8 km] to the west)
- Rutherfordton
(21 miles [33.8 km] to the southeast)
- Saluda
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Saluda have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saluda
- Saluda is located in Henderson County
- Population from the 2020 Census: 703 people
- Jump to TripAdvisor's Tourism page for Saluda <2>
- Skyland
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Skyland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skyland
- Skyland is located in Buncombe County
- Jump to TripAdvisor's Tourism page for Skyland <2>
- Spindale
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Spindale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spindale
- Spindale is located in Rutherford County
- Population from the 2020 Census: 4,175 people
- Jump to TripAdvisor's Tourism page for Spindale <2>
- Spruce Pine
(20 miles [32.2 km] to the north)
- Swannanoa
(12 miles [19.3 km] to the west)
- Tryon
(29 miles [46.7 km] to the south)
- Union Mills
(15 miles [24.1 km] to the southeast)
- Weaverville
(21 miles [33.8 km] to the west)
- Woodfin
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Woodfin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodfin
- Woodfin is located in Buncombe County
- Population from the 2020 Census: 6,679 people
- Jump to TripAdvisor's Tourism page for Woodfin <2>
- Zirconia
(29 miles [46.7 km] to the southwest)
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Old Fort) to Point B.Our distance measurements begin at a specific point in Old Fort. The point we use is located at these GPS coordinates - Latitude: 35.6292, Longitude: -82.1814 In this case, the coordinates for Old Fort have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|