RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Guilford County >> McLeansville >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about McLeansville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for McLeansville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

McLeansville is located in Guilford County.

To see how the shape of North Carolina's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Guilford County: Alamance, Caswell, Davidson, Forsyth, Randolph, Rockingham & Stokes.

Below are the counties that are near McLeansville. For each of these counties, we show a sample of those communities that are closest to McLeansville:

  • Guilford County     (The home county of McLeansville)
    • The following are listed by their distance from McLeansville, with the one closest to McLeansville listed first.
    • Sedalia
      (2 miles [3.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Sedalia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sedalia
      • Sedalia is located in Guilford County
      • Population from the 2020 Census: 689 people
    • Whitsett
      (5 miles [8 km] to the east)
      • Note: The GPS coordinates that we are using for Whitsett have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Whitsett
      • Whitsett is located in Guilford County
      • Population from the 2020 Census: 643 people
      • Jump to TripAdvisor's Tourism page for Whitsett <2>
    • Gibsonville
      (6 miles [9.7 km] to the east)
    • Rudd
      (6 miles [9.7 km] to the northwest)
    • Cumberland
      (6 miles [9.7 km] to the west)
    • White Oak
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for White Oak have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Oak
      • White Oak is located in Guilford County
    • Browns Summit
      (7 miles [11.3 km] to the northwest)
    • Greensboro
      (7 miles [11.3 km] to the west)
    • Spicewood
      (7 miles [11.3 km] to the west)
    • Forest Oaks
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Forest Oaks have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Forest Oaks
      • Forest Oaks is located in Guilford County
    • Fairfield
      (8 miles [12.9 km] to the west)
      • Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairfield
      • Fairfield is located in Guilford County
    • Southmont
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Southmont have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Southmont
      • Southmont is located in Guilford County
  • Alamance County
    • The following are listed by their distance from McLeansville, with the one closest to McLeansville listed first.
    • Glenwood Acres
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Glenwood Acres have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glenwood Acres
      • Glenwood Acres is located in Alamance County
    • Westbrook Forest
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Westbrook Forest have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Westbrook Forest
      • Westbrook Forest is located in Alamance County
    • Westbrook
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Westbrook have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Westbrook
      • Westbrook is located in Alamance County
    • Country Club Acres
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Country Club Acres have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Country Club Acres
      • Country Club Acres is located in Alamance County
    • Deerfield
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Deerfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Deerfield
      • Deerfield is located in Alamance County
    • Elon College
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Elon College came from an uncertain source and they still need to be verified:<3>
      • Jump to our Gazetteer entry for Elon College
      • Elon College is located in Alamance County
      • Jump to TripAdvisor's Tourism page for Elon College <2>
    • Elon
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Elon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elon
      • Elon is located in Alamance County
      • Population from the 2020 Census: 12,186 people
    • Mark View
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Mark View have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mark View
      • Mark View is located in Alamance County
    • Random Hills
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Random Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Random Hills
      • Random Hills is located in Alamance County
    • Westview Terrace
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Westview Terrace have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Westview Terrace
      • Westview Terrace is located in Alamance County
    • Westview
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Westview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Westview
      • Westview is located in Alamance County
    • The Country
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for The Country have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for The Country
      • The Country is located in Alamance County
  • Caswell County
    • The following are listed by their distance from McLeansville, with the one closest to McLeansville listed first.
    • Stony Creek
      (16 miles [25.7 km] to the northeast)
    • Ashland
      (17 miles [27.4 km] to the northeast)
    • Anderson
      (20 miles [32.2 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Anderson. Although the coordinates have been estimated, they should be in the vicinity.<4>
      • Jump to our Gazetteer entry for Anderson
      • Anderson is located in Caswell County
      • Google driving directions:
      • From your current location to Anderson
      • From McLeansville to Anderson
    • Jericho
      (20 miles [32.2 km] to the northeast)
    • Locust Hill
      (21 miles [33.8 km] to the northeast)
    • Quick
      (22 miles [35.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Quick. Although the coordinates have been estimated, they should be in the vicinity.<4>
      • Jump to our Gazetteer entry for Quick
      • Quick is located in Caswell County
      • Google driving directions:
      • From your current location to Quick
      • From McLeansville to Quick
    • West Yanceyville
      (25 miles [40.2 km] to the northeast)
    • Bethel
      (26 miles [41.8 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Bethel. Although the coordinates have been estimated, they should be in the vicinity.<4>
      • Jump to our Gazetteer entry for Bethel
      • Bethel is located in Caswell County
      • Google driving directions:
      • From your current location to Bethel
      • From McLeansville to Bethel
    • Prospect Hill
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Prospect Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prospect Hill
      • Prospect Hill is located in Caswell County
    • Yanceyville
      (27 miles [43.5 km] to the northeast)
    • Pelham
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Pelham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pelham
      • Pelham is located in Caswell County
    • Ridgeville
      (29 miles [46.7 km] to the northeast)
  • Chatham County
  • Davidson County
    • The following are listed by their distance from McLeansville, with the one closest to McLeansville listed first.
    • Abotts Creek
      (24 miles [38.6 km] to the west)
    • Thomasville
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Thomasville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thomasville
      • Thomasville is located in Davidson County
      • Population from the 2020 Census: 26,713 people
      • Jump to TripAdvisor's Tourism page for Thomasville <2>
    • Eden ‑ Historic
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Eden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eden
      • Eden is located in Davidson County
    • Fair Grove
      (29 miles [46.7 km] to the southwest)
    • Wallburg
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Wallburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wallburg
      • Wallburg is located in Davidson County
      • Population from the 2020 Census: 3,125 people
      • Jump to TripAdvisor's Tourism page for Wallburg <2>
    • Bethany ‑ Historic
      (30 miles [48.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Bethany. Although the coordinates have been estimated, they should be in the vicinity.<4>
      • Jump to our Gazetteer entry for Bethany
      • Bethany is located in Davidson County
      • Google driving directions:
      • From your current location to Bethany
      • From McLeansville to Bethany
  • Forsyth County
    • The following are listed by their distance from McLeansville, with the one closest to McLeansville listed first.
    • Benefit ‑ Historic
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Benefit have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Benefit
      • Benefit is located in Forsyth County
    • Yorktown
      (22 miles [35.4 km] to the west)
    • Applegate
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Applegate have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Applegate
      • Applegate is located in Forsyth County
    • Bonanza Hills
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Bonanza Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bonanza Hills
      • Bonanza Hills is located in Forsyth County
    • Christy Acres
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Christy Acres have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Christy Acres
      • Christy Acres is located in Forsyth County
    • Cliffwood
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Cliffwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cliffwood
      • Cliffwood is located in Forsyth County
    • Emorywood Estates
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Emorywood Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Emorywood Estates
      • Emorywood Estates is located in Forsyth County
    • Horneytown
      (23 miles [37 km] to the west)
    • Kernersville
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Kernersville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kernersville
      • Kernersville is located in Forsyth County
      • Population from the 2020 Census: 24,891 people
      • Jump to TripAdvisor's Tourism page for Kernersville <2>
    • Pine Knolls
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Pine Knolls have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine Knolls
      • Pine Knolls is located in Forsyth County
    • Beeson Crossroads
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Beeson Crossroads have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beeson Crossroads
      • Beeson Crossroads is located in Forsyth County
    • Belews Creek
      (24 miles [38.6 km] to the west)
  • Orange County
    • The following are listed by their distance from McLeansville, with the one closest to McLeansville listed first.
    • Lakeview Acres
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Lakeview Acres have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lakeview Acres
      • Lakeview Acres is located in Orange County
    • Cheeks Crossroads
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Cheeks Crossroads have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cheeks Crossroads
      • Cheeks Crossroads is located in Orange County
    • Miles
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Miles have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Miles
      • Miles is located in Orange County
    • Oaks
      (24 miles [38.6 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Oaks. Although the coordinates have been estimated, they should be in the vicinity.<4>
      • Jump to our Gazetteer entry for Oaks
      • Oaks is located in Orange County
      • Google driving directions:
      • From your current location to Oaks
      • From McLeansville to Oaks
    • Carr
      (25 miles [40.2 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Carr. Although the coordinates have been estimated, they should be in the vicinity.<4>
      • Jump to our Gazetteer entry for Carr
      • Carr is located in Orange County
      • Google driving directions:
      • From your current location to Carr
      • From McLeansville to Carr
    • Teer
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Teer have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Teer
      • Teer is located in Orange County
    • Jordan Oak
      (26 miles [41.8 km] to the east)
    • Cedar Grove
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Cedar Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cedar Grove
      • Cedar Grove is located in Orange County
    • Efland
      (27 miles [43.5 km] to the east)
    • McDade
      (27 miles [43.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for McDade. Although the coordinates have been estimated, they should be in the vicinity.<4>
      • Jump to our Gazetteer entry for McDade
      • McDade is located in Orange County
      • Google driving directions:
      • From your current location to McDade
      • From McLeansville to McDade
    • Orange Grove
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Orange Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Orange Grove
      • Orange Grove is located in Orange County
    • Stagecoach Forest
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Stagecoach Forest have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stagecoach Forest
      • Stagecoach Forest is located in Orange County
  • Randolph County
    • The following are listed by their distance from McLeansville, with the one closest to McLeansville listed first.
    • Redcross
      (15 miles [24.1 km] to the south)
    • Liberty
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Liberty
      • Liberty is located in Randolph County
      • Population from the 2020 Census: 2,671 people
      • Jump to TripAdvisor's Tourism page for Liberty <2>
    • Melanchton
      (18 miles [29 km] to the south)
    • Millboro
      (21 miles [33.8 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Millboro. Although the coordinates have been estimated, they should be in the vicinity.<4>
      • Jump to our Gazetteer entry for Millboro
      • Millboro is located in Randolph County
      • Google driving directions:
      • From your current location to Millboro
      • From McLeansville to Millboro
    • Randleman
      (21 miles [33.8 km] to the south)
    • Staley
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Staley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Staley
      • Staley is located in Randolph County
      • Population from the 2020 Census: 401 people
      • Jump to TripAdvisor's Tourism page for Staley <2>
    • Worthville
      (22 miles [35.4 km] to the south)
    • Archdale
      (22 miles [35.4 km] to the southwest)
    • New Market
      (22 miles [35.4 km] to the southwest)
    • Sophia
      (22 miles [35.4 km] to the southwest)
    • Cedar Falls
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Cedar Falls have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cedar Falls
      • Cedar Falls is located in Randolph County
    • Central Falls
      (24 miles [38.6 km] to the south)
  • Rockingham County
    • The following are listed by their distance from McLeansville, with the one closest to McLeansville listed first.
    • Belmont
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Belmont have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belmont
      • Belmont is located in Rockingham County
    • Reidsville
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Reidsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Reidsville
      • Reidsville is located in Rockingham County
      • Population from the 2020 Census: 13,993 people
      • Jump to TripAdvisor's Tourism page for Reidsville <2>
    • Wittys Crossroads
      (15 miles [24.1 km] to the northwest)
    • Norwood
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Norwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Norwood
      • Norwood is located in Rockingham County
    • Lawsonville
      (20 miles [32.2 km] to the north)
    • Wentworth
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Wentworth have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wentworth
      • Wentworth is located in Rockingham County
      • Population from the 2020 Census: 2,734 people
    • Gold Hill
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Gold Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gold Hill
      • Gold Hill is located in Rockingham County
    • Ellisboro
      (23 miles [37 km] to the northwest)
    • College Village
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for College Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for College Village
      • College Village is located in Rockingham County
    • Ruffin
      (24 miles [38.6 km] to the north)
    • Madison
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Madison have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Madison
      • Madison is located in Rockingham County
      • Population from the 2020 Census: 2,108 people
      • Jump to TripAdvisor's Tourism page for Madison <2>
    • Shiloh
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Shiloh have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shiloh
      • Shiloh is located in Rockingham County
  • Stokes County
    • The following are listed by their distance from McLeansville, with the one closest to McLeansville listed first.
    • Pine Hall
      (26 miles [41.8 km] to the northwest)
    • Walnut Cove
      (29 miles [46.7 km] to the northwest)
    • Fulp
      (29 miles [46.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Fulp. Although the coordinates have been estimated, they should be in the vicinity.<4>
      • Jump to our Gazetteer entry for Fulp
      • Fulp is located in Stokes County
      • Google driving directions:
      • From your current location to Fulp
      • From McLeansville to Fulp
    • Bailey Town
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bailey Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bailey Town
      • Bailey Town is located in Stokes County

For an expanded list of the communities that are closest to McLeansville, see our County-by-County Page for McLeansville.

Cemeteries Near McLeansville ...

Below are cemeteries that are in the vicinity of McLeansville.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for McLeansville covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from McLeansville, with the one closest to McLeansville listed first.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

The Rand McNally Atlas shows that McLeansville had a population of 33 people in 1895 with a post office and railroad service.

These communities are listed based on their distance from McLeansville, with the one closest to McLeansville listed first.

  • Gibsonville
    (6 miles [9.7 km] to the east)
  • Greensboro
    (7 miles [11.3 km] to the west)
  • Browns Summit
    (7 miles [11.3 km] to the northwest)
  • Elon College
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Elon College came from an uncertain source and they still need to be verified:<3>
    • Jump to our Gazetteer entry for Elon College
    • Elon College is located in Alamance County
    • Jump to TripAdvisor's Tourism page for Elon College <2>
  • Vandalia
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Vandalia have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vandalia
    • Vandalia is located in Guilford County
  • Altamahaw
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Altamahaw have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Altamahaw
    • Altamahaw is located in Alamance County
  • Benaja
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Benaja have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Benaja
    • Benaja is located in Rockingham County
  • Pomona
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Pomona have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pomona
    • Pomona is located in Guilford County
  • Kimesville
    (12 miles [19.3 km] to the southeast)
  • Burlington
    (12 miles [19.3 km] to the east)
  • Hillsdale
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Hillsdale have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hillsdale
    • Hillsdale is located in Guilford County
  • Guilford College
    (12 miles [19.3 km] to the west)
  • Continue List   (15 more) ...
    • Climax
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Climax have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Climax
      • Climax is located in Guilford County
      • Jump to TripAdvisor's Tourism page for Climax <2>
    • Julian
      (13 miles [20.9 km] to the south)
    • Monroeton
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Monroeton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monroeton
      • Monroeton is located in Rockingham County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around McLeansville. See our List of 1890's Communities around McLeansville.

Newspapers Published in McLeansville ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 89 newspapers that have been published in the area around McLeansville.

Although we're unaware of any newspapers that were published in the immediate area of McLeansville, there are papers which were published within 12 miles [19.3 km]<7>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for McLeansville.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to McLeansville:

Unfortunately, we don't know of a website for McLeansville. If you can help, please contact us through our Feedback Page.

The official website for Guilford County: www.co.guilford.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about McLeansville, please let us know so that we can improve our accuracy.
<7>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- McLeansville) to Point B.Our distance measurements begin at a specific point in McLeansville. The point we use is located at these GPS coordinates - Latitude: 36.1075, Longitude: -79.6582       In this case, the coordinates for McLeansville have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025