RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Sampson County >> Hayne >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Hayne (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Hayne. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Hayne is located in Sampson County.

To see how the shape of North Carolina's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Sampson County: Bladen, Cumberland, Duplin, Harnett, Johnston, Pender & Wayne.

Below are the counties that are near Hayne. For each of these counties, we show a sample of those communities that are closest to Hayne:

  • Sampson County     (The home county of Hayne)
    • The following are listed by their distance from Hayne, with the one closest to Hayne listed first.
    • Autryville
      (3 miles [4.8 km] to the northwest)
      • Jump to our Gazetteer entry for Autryville
      • Autryville is located in Sampson County
      • Population from the 2020 Census: 191 people
    • Roseboro
      (4 miles [6.4 km] to the east)
    • Salemburg
      (5 miles [8 km] to the northeast)
    • Snow Hill
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Snow Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Snow Hill
      • Snow Hill is located in Sampson County
    • Rebel City
      (7 miles [11.3 km] to the north)
      • Jump to our Gazetteer entry for Rebel City
      • Rebel City is located in Sampson County
    • Concord
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Concord
      • Concord is located in Sampson County
    • Bonnetsville
      (10 miles [16.1 km] to the east)
      • Jump to our Gazetteer entry for Bonnetsville
      • Bonnetsville is located in Sampson County
    • Reynolds Crossroads
      (10 miles [16.1 km] to the northeast)
      • Jump to our Gazetteer entry for Reynolds Crossroads
      • Reynolds Crossroads is located in Sampson County
    • McDaniels
      (10 miles [16.1 km] to the southeast)
      • Jump to our Gazetteer entry for McDaniels
      • McDaniels is located in Sampson County
    • Beaman Crossroads
      (13 miles [20.9 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Beaman Crossroads. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Beaman Crossroads
      • Beaman Crossroads is located in Sampson County
    • Beulah
      (14 miles [22.5 km] to the east)
      • Jump to our Gazetteer entry for Beulah
      • Beulah is located in Sampson County
    • Clinton
      (15 miles [24.1 km] to the east)
    • Spiveys Corner
      (15 miles [24.1 km] to the north)
      • Jump to our Gazetteer entry for Spiveys Corner
      • Spiveys Corner is located in Sampson County
  • Bladen County
    • The following are listed by their distance from Hayne, with the one closest to Hayne listed first.
    • Jerome
      (12 miles [19.3 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Jerome. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Jerome
      • Jerome is located in Bladen County
    • White Oak
      (17 miles [27.4 km] to the south)
    • Ruskin
      (19 miles [30.6 km] to the south)
      • Jump to our Gazetteer entry for Ruskin
      • Ruskin is located in Bladen County
    • Tar Heel
      (20 miles [32.2 km] to the southwest)
    • Yorick
      (21 miles [33.8 km] to the south)
      • Jump to our Gazetteer entry for Yorick
      • Yorick is located in Bladen County
    • Dublin
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dublin
      • Dublin is located in Bladen County
      • Population from the 2020 Census: 328 people
    • White Lake
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Lake
      • White Lake is located in Bladen County
      • Population from the 2020 Census: 742 people
      • Jump to TripAdvisor's Tourism page for White Lake <1>
    • Elizabethtown
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elizabethtown
      • Elizabethtown is located in Bladen County
      • Population from the 2020 Census: 3,378 people
      • Jump to TripAdvisor's Tourism page for Elizabethtown <1>
    • Mount Olive
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Olive
      • Mount Olive is located in Bladen County
  • Cumberland County
    • The following are listed by their distance from Hayne, with the one closest to Hayne listed first.
    • Stedman
      (6 miles [9.7 km] to the west)
    • Judson
      (12 miles [19.3 km] to the west)
      • Jump to our Gazetteer entry for Judson
      • Judson is located in Cumberland County
    • Vander
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Vander have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vander
      • Vander is located in Cumberland County
    • Eastover
      (13 miles [20.9 km] to the northwest)
      • Jump to our Gazetteer entry for Eastover
      • Eastover is located in Cumberland County
      • Estimated population in 2015: 3,677 people
    • Falcon
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Falcon have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Falcon
      • Falcon is located in Cumberland County
      • Population from the 2020 Census: 250 people
    • Wade
      (15 miles [24.1 km] to the northwest)
      • Jump to our Gazetteer entry for Wade
      • Wade is located in Cumberland County
      • Population from the 2020 Census: 588 people
      • Jump to TripAdvisor's Tourism page for Wade <1>
    • Williams Village
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Williams Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williams Village
      • Williams Village is located in Cumberland County
    • Godwin
      (17 miles [27.4 km] to the north)
    • Fayetteville
      (17 miles [27.4 km] to the west)
    • Holly Springs
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Holly Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Holly Springs
      • Holly Springs is located in Cumberland County
    • Ardulusa
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Ardulusa
      • Ardulusa is located in Cumberland County
    • Highland Village
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Highland Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Highland Village
      • Highland Village is located in Cumberland County
    • Hope Mills
      (20 miles [32.2 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Hope Mills. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hope Mills
      • Hope Mills is located in Cumberland County
      • Population from the 2020 Census: 15,848 people
      • Jump to TripAdvisor's Tourism page for Hope Mills <1>
  • Duplin County
    • The following are listed by their distance from Hayne, with the one closest to Hayne listed first.
    • Baltic
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Baltic have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baltic
      • Baltic is located in Duplin County
    • Bowdens
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Bowdens have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bowdens
      • Bowdens is located in Duplin County
    • Faison
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Faison have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Faison
      • Faison is located in Duplin County
      • Population from the 2020 Census: 959 people
      • Jump to TripAdvisor's Tourism page for Faison <1>
    • Concord
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Concord
      • Concord is located in Duplin County
    • Warsaw
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Warsaw
      • Warsaw is located in Duplin County
      • Population from the 2020 Census: 3,084 people
      • Jump to TripAdvisor's Tourism page for Warsaw <1>
    • Harrells
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Harrells have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrells
      • Harrells is located in Duplin County
      • Population from the 2020 Census: 191 people
    • Brices Crossroads
      (29 miles [46.7 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Brices Crossroads. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Brices Crossroads
      • Brices Crossroads is located in Duplin County
    • Carroll
      (29 miles [46.7 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Carroll. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Carroll
      • Carroll is located in Duplin County
    • Calypso
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Calypso have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Calypso
      • Calypso is located in Duplin County
      • Population from the 2020 Census: 528 people
    • Magnolia
      (30 miles [48.3 km] to the east)
      • Jump to our Gazetteer entry for Magnolia
      • Magnolia is located in Duplin County
      • Population from the 2020 Census: 951 people
  • Harnett County
    • The following are listed by their distance from Hayne, with the one closest to Hayne listed first.
    • Averasboro ‑ Historic
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Averasboro
      • Averasboro is located in Harnett County
    • Dunn
      (22 miles [35.4 km] to the north)
      • Jump to our Gazetteer entry for Dunn
      • Dunn is located in Harnett County
      • Population from the 2020 Census: 9,684 people
      • Jump to TripAdvisor's Tourism page for Dunn <1>
    • Grove Park
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Grove Park have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grove Park
      • Grove Park is located in Harnett County
    • Lakeside Village
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Lakeside Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lakeside Village
      • Lakeside Village is located in Harnett County
    • Westhaven
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Westhaven have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Westhaven
      • Westhaven is located in Harnett County
    • Fonville
      (23 miles [37 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Fonville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Fonville
      • Fonville is located in Harnett County
    • Erwin
      (24 miles [38.6 km] to the north)
      • Jump to our Gazetteer entry for Erwin
      • Erwin is located in Harnett County
      • Population from the 2020 Census: 5,202 people
      • Jump to TripAdvisor's Tourism page for Erwin <1>
    • Walkertown
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Walkertown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walkertown
      • Walkertown is located in Harnett County
    • Bunnlevel
      (25 miles [40.2 km] to the northwest)
      • Jump to our Gazetteer entry for Bunnlevel
      • Bunnlevel is located in Harnett County
    • Turlington
      (26 miles [41.8 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Turlington. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Turlington
      • Turlington is located in Harnett County
    • Anderson Creek
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Anderson Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anderson Creek
      • Anderson Creek is located in Harnett County
    • Harnett
      (27 miles [43.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Harnett. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Harnett
      • Harnett is located in Harnett County
    • Twin Lakes
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Twin Lakes have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Twin Lakes
      • Twin Lakes is located in Harnett County
  • Hoke County
    • Rockfish
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Rockfish have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rockfish
      • Rockfish is located in Hoke County
  • Johnston County
    • The following are listed by their distance from Hayne, with the one closest to Hayne listed first.
    • McKoy
      (20 miles [32.2 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for McKoy. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for McKoy
      • McKoy is located in Johnston County
    • Peacocks Crossroads
      (24 miles [38.6 km] to the north)
      • Jump to our Gazetteer entry for Peacocks Crossroads
      • Peacocks Crossroads is located in Johnston County
    • Harper
      (26 miles [41.8 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Harper. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Harper
      • Harper is located in Johnston County
    • Benson
      (27 miles [43.5 km] to the north)
    • Allens Crossroads
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Allens Crossroads
      • Allens Crossroads is located in Johnston County
    • Bentonville
      (30 miles [48.3 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Bentonville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bentonville
      • Bentonville is located in Johnston County
  • Robeson County
    • The following are listed by their distance from Hayne, with the one closest to Hayne listed first.
    • Saint Pauls
      (24 miles [38.6 km] to the southwest)
    • Parkton
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parkton
      • Parkton is located in Robeson County
      • Population from the 2020 Census: 430 people
      • Jump to TripAdvisor's Tourism page for Parkton <1>
    • Rozier Siding ‑ Historic
      (26 miles [41.8 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Rozier Siding. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Rozier Siding
      • Rozier Siding is located in Robeson County
    • Rex
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for Rex
      • Rex is located in Robeson County
    • Lumber Bridge
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for Lumber Bridge have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lumber Bridge
      • Lumber Bridge is located in Robeson County
      • Population from the 2020 Census: 87 people
    • Barker Ten Mile
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Barker Ten Mile
      • Barker Ten Mile is located in Robeson County
    • Rennert
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Rennert have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rennert
      • Rennert is located in Robeson County
      • Population from the 2020 Census: 373 people
    • Saddletree
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Saddletree
      • Saddletree is located in Robeson County

For an expanded list of the communities that are closest to Hayne, see our County-by-County Page for Hayne.

Cemeteries Near Hayne ...

Below are cemeteries that are in the vicinity of Hayne.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Hayne covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Hayne, with the one closest to Hayne listed first.

  • Butler Cemetery
    (Less than 2 miles to the northwest)
    • Jump to our Gazetteer entry for the Butler Cemetery
    • Note: The GPS coordinates that we are using for the Butler Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Johnson Cemetery
    (2 miles [3.2 km] to the northwest)
  • Alderson Parker Family Center
    (3 miles [4.8 km] to the east)
  • Autry - Averitt Family Cemetery
    (3 miles [4.8 km] to the north)
  • Home Cemetery
    (3 miles [4.8 km] to the northwest)
    • Jump to our Gazetteer entry for the Home Cemetery
    • Note: The GPS coordinates that we are using for the Home Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Hollywood Cemetery
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for the Hollywood Cemetery
    • Note: The GPS coordinates that we are using for the Hollywood Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Sunrise Cemetery
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for the Sunrise Cemetery
    • Note: The GPS coordinates that we are using for the Sunrise Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Spell Cemetery
    (4 miles [6.4 km] to the northeast)
    • Jump to our Gazetteer entry for the Spell Cemetery
    • Note: The GPS coordinates that we are using for the Spell Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Halls Cemetery
    (4 miles [6.4 km] to the north)
    • Jump to our Gazetteer entry for the Halls Cemetery
    • Note: The GPS coordinates that we are using for the Halls Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • McCall Cemetery
    (5 miles [8 km] to the northwest)
    • Jump to our Gazetteer entry for the McCall Cemetery
    • Note: The GPS coordinates that we are using for the McCall Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Hall Cemetery
    (6 miles [9.7 km] to the northwest)
    • Jump to our Gazetteer entry for the Hall Cemetery
    • Note: The GPS coordinates that we are using for the Hall Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Fisher Cemetery
    (6 miles [9.7 km] to the northwest)
    • Jump to our Gazetteer entry for the Fisher Cemetery
    • Note: The GPS coordinates that we are using for the Fisher Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Continue List   (212 more) ...
    • Autry Cemetery
      (8 miles [12.9 km] to the north)
    • Maxwell Cemetery
      (8 miles [12.9 km] to the northwest)
      • Jump to our Gazetteer entry for the Maxwell Cemetery
      • Note: The GPS coordinates that we are using for the Maxwell Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Williams Cemetery
      (8 miles [12.9 km] to the north)
      • Jump to our Gazetteer entry for the Williams Cemetery
      • Note: The GPS coordinates that we are using for the Williams Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that in 1895, Hayne had a post office and no railroad service.

These communities are listed based on their distance from Hayne, with the one closest to Hayne listed first.

  • Autryville
    (3 miles [4.8 km] to the northwest)
    • Jump to our Gazetteer entry for Autryville
    • Autryville is located in Sampson County
    • Population from the 2020 Census: 191 people
  • Roseboro
    (4 miles [6.4 km] to the east)
  • Stedman
    (6 miles [9.7 km] to the west)
  • Huntley
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Huntley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Huntley
    • Huntley is located in Sampson County
  • Clement
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Clement have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clement
    • Clement is located in Sampson County
  • Cedar Creek
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Cedar Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Creek
    • Cedar Creek is located in Cumberland County
  • Jerome
    (12 miles [19.3 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Jerome. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Jerome
    • Jerome is located in Bladen County
  • Ammon
    (12 miles [19.3 km] to the south)
    • Note: The GPS coordinates that we are using for Ammon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ammon
    • Ammon is located in Bladen County
  • Parkersburg
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Parkersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Parkersburg
    • Parkersburg is located in Sampson County
  • Vander
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Vander have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vander
    • Vander is located in Cumberland County
  • Beaman Crossroads
    (13 miles [20.9 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Beaman Crossroads. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Beaman Crossroads
    • Beaman Crossroads is located in Sampson County
  • Mingo
    (14 miles [22.5 km] to the north)
    • Note: The GPS coordinates that we are using for Mingo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mingo
    • Mingo is located in Sampson County
  • Continue List   (16 more) ...
    • Grays Creek
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Grays Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grays Creek
      • Grays Creek is located in Cumberland County
    • Clinton
      (15 miles [24.1 km] to the east)
    • Wade
      (15 miles [24.1 km] to the northwest)
      • Jump to our Gazetteer entry for Wade
      • Wade is located in Cumberland County
      • Population from the 2020 Census: 588 people
      • Jump to TripAdvisor's Tourism page for Wade <1>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Hayne. See our List of 1890's Communities around Hayne.

Newspapers Published in Hayne ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 66 newspapers that have been published in the area around Hayne.

Although we're unaware of any newspapers that were published in the immediate area of Hayne, there are papers which were published within 17 miles [27.4 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Hayne.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Hayne:

Unfortunately, we don't know of a website for Hayne. If you can help, please contact us through our Feedback Page.

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hayne, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Hayne) to Point B.Our distance measurements begin at a specific point in Hayne. The point we use is located at these GPS coordinates - Latitude: 34.9810, Longitude: -78.5900       In this case, the coordinates for Hayne have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025