Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that East Lake had a population of 39 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from East Lake, with the one closest to East Lake listed first.
- Buffalo City
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Buffalo City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo City
- Buffalo City is located in Dare County
- Fort Landing
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for Fort Landing
- Fort Landing is located in Tyrrell County
- Mashoes
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Mashoes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mashoes
- Mashoes is located in Dare County
- Manns Harbor
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Manns Harbor. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Manns Harbor
- Manns Harbor is located in Dare County
- Jump to TripAdvisor's Tourism page for Manns Harbor <4>
- Gum Neck
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Gum Neck have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Neck
- Gum Neck is located in Tyrrell County
- Columbia
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Columbia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbia
- Columbia is located in Tyrrell County
- Population from the 2020 Census: 752 people
- Jump to TripAdvisor's Tourism page for Columbia <4>
- Manteo
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Manteo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manteo
- Manteo is located in Dare County
- Population from the 2020 Census: 1,468 people
- Jump to TripAdvisor's Tourism page for Manteo <4>
- Colington
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Colington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colington
- Colington is located in Dare County
- Harbinger
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Harbinger have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harbinger
- Harbinger is located in Currituck County
- Jump to TripAdvisor's Tourism page for Harbinger <4>
- Stumpy Point
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Stumpy Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stumpy Point
- Stumpy Point is located in Dare County
- Wanchese
(18 miles [29 km] to the east)
- Nags Head
(19 miles [30.6 km] to the east)
- Jarvisburg
(22 miles [35.4 km] to the north)
- Weeksville
(24 miles [38.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Weeksville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Weeksville
- Weeksville is located in Pasquotank County
- Old Trap
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Old Trap have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Trap
- Old Trap is located in Camden County
- Creswell
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Creswell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Creswell
- Creswell is located in Washington County
- Population from the 2020 Census: 232 people
- Jump to TripAdvisor's Tourism page for Creswell <4>
- Engelhard
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Engelhard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Engelhard
- Engelhard is located in Hyde County
- Jump to TripAdvisor's Tourism page for Engelhard <4>
- Shiloh
(27 miles [43.5 km] to the north)
- Jump to our Gazetteer entry for Shiloh
- Shiloh is located in Camden County
- Poplar Branch
(27 miles [43.5 km] to the north)
- Nixonton
(27 miles [43.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Nixonton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nixonton
- Nixonton is located in Pasquotank County
- Scuppernong
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Scuppernong have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scuppernong
- Scuppernong is located in Washington County
- Fairfield
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Hyde County
- Jump to TripAdvisor's Tourism page for Fairfield <4>
- Middletown
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Middletown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middletown
- Middletown is located in Hyde County
- Lake Landing
(29 miles [46.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Lake Landing. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lake Landing
- Lake Landing is located in Hyde County
- Burgess
(29 miles [46.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Burgess. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Burgess
- Burgess is located in Perquimans County
Off-the-Road Links ...
The official website for Dare County: www.co.dare.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about East Lake, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |