|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the McGill Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the McGill Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the McGill Cemetery. We've listed the following communities based on their distance, with the closest first.
- Elizabethtown
(2 miles [3.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elizabethtown
- Elizabethtown is located in Bladen County
- Population from the 2020 Census: 3,378 people
- Jump to TripAdvisor's Tourism page for Elizabethtown <3>
- Mount Olive
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Bladen County
- Yorick
(4 miles [6.4 km] to the north)
- Jump to our Gazetteer entry for Yorick
- Yorick is located in Bladen County
- Dublin
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dublin
- Dublin is located in Bladen County
- Population from the 2020 Census: 328 people
- Abbottsburg
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Abbottsburg
- Abbottsburg is located in Bladen County
- Ruskin
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for Ruskin
- Ruskin is located in Bladen County
- Clarkton
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkton
- Clarkton is located in Bladen County
- Population from the 2020 Census: 741 people
- Jump to TripAdvisor's Tourism page for Clarkton <3>
- White Lake
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Lake
- White Lake is located in Bladen County
- Population from the 2020 Census: 742 people
- Jump to TripAdvisor's Tourism page for White Lake <3>
- Bladenboro
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bladenboro
- Bladenboro is located in Bladen County
- Population from the 2020 Census: 1,697 people
- Jump to TripAdvisor's Tourism page for Bladenboro <3>
- White Oak
(10 miles [16.1 km] to the north)
- Rico
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Rico
- Rico is located in Columbus County
- Butters
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Butters have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butters
- Butters is located in Bladen County
- Rosindale
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Rosindale. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rosindale
- Rosindale is located in Bladen County
- Tar Heel
(12 miles [19.3 km] to the northwest)
- Ammon
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Ammon
- Ammon is located in Bladen County
- Mount Olive
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Columbus County
- Council
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Council have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Council
- Council is located in Bladen County
- Allenton
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Allenton
- Allenton is located in Robeson County
- Jerome
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Jerome. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Jerome
- Jerome is located in Bladen County
- Whiteville
(18 miles [29 km] to the south)
- Evergreen
(19 miles [30.6 km] to the southwest)
- Jump to our Gazetteer entry for Evergreen
- Evergreen is located in Columbus County
- Hallsboro
(19 miles [30.6 km] to the south)
- Jump to our Gazetteer entry for Hallsboro
- Hallsboro is located in Columbus County
- Tomahawk
(19 miles [30.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Tomahawk. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Tomahawk
- Tomahawk is located in Sampson County
- Garland
(19 miles [30.6 km] to the northeast)
- Boardman
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Boardman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boardman
- Boardman is located in Columbus County
- Population from the 2020 Census: 152 people
- Redbug
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Redbug
- Redbug is located in Columbus County
- Kelly
(20 miles [32.2 km] to the southeast)
- Jump to our Gazetteer entry for Kelly
- Kelly is located in Bladen County
- Kerr
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Kerr. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Kerr
- Kerr is located in Sampson County
- Barker Ten Mile
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Lumberton
(20 miles [32.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Lumberton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the McGill Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.6032, Longitude: -78.6422 In this case, the coordinates for the McGill Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|