|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Grimes Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Grimes Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Grimes Cemetery. We've listed the following communities based on their distance, with the closest first.
- Tar Heel
(2 miles [3.2 km] to the west)
- White Oak
(3 miles [4.8 km] to the northeast)
- Dublin
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dublin
- Dublin is located in Bladen County
- Population from the 2020 Census: 328 people
- Ruskin
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for Ruskin
- Ruskin is located in Bladen County
- Yorick
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for Yorick
- Yorick is located in Bladen County
- Jerome
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Jerome. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Jerome
- Jerome is located in Bladen County
- Elizabethtown
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elizabethtown
- Elizabethtown is located in Bladen County
- Population from the 2020 Census: 3,378 people
- Jump to TripAdvisor's Tourism page for Elizabethtown <2>
- Butters
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Butters have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butters
- Butters is located in Bladen County
- Bladenboro
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bladenboro
- Bladenboro is located in Bladen County
- Population from the 2020 Census: 1,697 people
- Jump to TripAdvisor's Tourism page for Bladenboro <2>
- Rozier Siding ‑ Historic
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Rozier Siding. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rozier Siding
- Rozier Siding is located in Robeson County
- Barker Ten Mile
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Allenton
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Allenton
- Allenton is located in Robeson County
- Mount Olive
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Bladen County
- Saint Pauls
(13 miles [20.9 km] to the northwest)
- Abbottsburg
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Abbottsburg
- Abbottsburg is located in Bladen County
- Lumberton
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Lumberton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <2>
- White Lake
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Lake
- White Lake is located in Bladen County
- Population from the 2020 Census: 742 people
- Jump to TripAdvisor's Tourism page for White Lake <2>
- Saddletree
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Saddletree
- Saddletree is located in Robeson County
- Clarkton
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkton
- Clarkton is located in Bladen County
- Population from the 2020 Census: 741 people
- Jump to TripAdvisor's Tourism page for Clarkton <2>
- Ardulusa
(19 miles [30.6 km] to the northwest)
- Jump to our Gazetteer entry for Ardulusa
- Ardulusa is located in Cumberland County
- Parkton
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <2>
- Rex
(19 miles [30.6 km] to the northwest)
- Jump to our Gazetteer entry for Rex
- Rex is located in Robeson County
- Rennert
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Rennert have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rennert
- Rennert is located in Robeson County
- Population from the 2020 Census: 373 people
- Judson
(19 miles [30.6 km] to the north)
- Jump to our Gazetteer entry for Judson
- Judson is located in Cumberland County
- Lowe
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Lowe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowe
- Lowe is located in Robeson County
- Mount Olive
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Columbus County
- Rico
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Rico
- Rico is located in Columbus County
- Garland
(20 miles [32.2 km] to the east)
- McDaniels
(20 miles [32.2 km] to the northeast)
- Jump to our Gazetteer entry for McDaniels
- McDaniels is located in Sampson County
- Hope Mills
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Hope Mills. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hope Mills
- Hope Mills is located in Cumberland County
- Population from the 2020 Census: 15,848 people
- Jump to TripAdvisor's Tourism page for Hope Mills <2>
- Autryville
(20 miles [32.2 km] to the north)
- Jump to our Gazetteer entry for Autryville
- Autryville is located in Sampson County
- Population from the 2020 Census: 191 people
- Stedman
(20 miles [32.2 km] to the north)
Off-the-Road Links ...
The official website for Bladen County: www.bladeninfo.net/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Grimes Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.7213, Longitude: -78.7542 In this case, the coordinates for the Grimes Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|