RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Johnston County >> Eason Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
North Carolina


The Commemorative Quarter for North Carolina







Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Eason Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Eason Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Eason Cemetery. We've listed the following cemeteries based on their distance, with the closest first.

  • Archer Lodge
    (4 miles [6.4 km] to the west)
    • Jump to our Gazetteer entry for Archer Lodge
    • Archer Lodge is located in Johnston County
    • Population from the 2020 Census: 5,322 people
    • Archer Lodge has also been known as:
    • Archer
  • Rogers Crossroads
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Rogers Crossroads have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rogers Crossroads
    • Rogers Crossroads is located in Nash County
  • Wilson's Mills
    (8 miles [12.9 km] to the southwest)
    • Jump to our Gazetteer entry for Wilson's Mills
    • Wilson's Mills is located in Johnston County
    • Population from the 2020 Census: 2,847 people
  • Middlesex
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Middlesex have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Middlesex
    • Middlesex is located in Nash County
    • Population from the 2020 Census: 834 people
  • Wendell
    (8 miles [12.9 km] to the northwest)
  • Micro
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Micro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Micro
    • Micro is located in Johnston County
    • Population from the 2020 Census: 553 people
  • Beulahtown
    (9 miles [14.5 km] to the southeast)
    • Jump to our Gazetteer entry for Beulahtown
    • Beulahtown is located in Johnston County
  • Eagle Rock
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Eagle Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eagle Rock
    • Eagle Rock is located in Wake County
  • Shotwell
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Shotwell have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shotwell
    • Shotwell is located in Wake County
  • Zebulon
    (9 miles [14.5 km] to the north)
  • Clayton
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Clayton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clayton
    • Clayton is located in Johnston County
    • Population from the 2020 Census: 26,458 people
    • Jump to TripAdvisor's Tourism page for Clayton <3>
  • Selma
    (10 miles [16.1 km] to the south)
    • Jump to our Gazetteer entry for Selma
    • Selma is located in Johnston County
    • Population from the 2020 Census: 7,323 people
    • Jump to TripAdvisor's Tourism page for Selma <3>
  • Redwood Village
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Redwood Village have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Redwood Village
    • Redwood Village is located in Johnston County
  • Kenly
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Kenly have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kenly
    • Kenly is located in Johnston County
    • Population from the 2020 Census: 1,624 people
    • Jump to TripAdvisor's Tourism page for Kenly <3>
  • Murraytown
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Murraytown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Murraytown
    • Murraytown is located in Nash County
  • West Smithfield
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for West Smithfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Smithfield
    • West Smithfield is located in Johnston County
  • Fairfield
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairfield
    • Fairfield is located in Johnston County
  • Bailey
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bailey
    • Bailey is located in Nash County
    • Population from the 2020 Census: 569 people
    • Jump to TripAdvisor's Tourism page for Bailey <3>
  • Union Hope
    (11 miles [17.7 km] to the north)
    • Jump to our Gazetteer entry for Union Hope
    • Union Hope is located in Nash County
  • Smithfield
    (12 miles [19.3 km] to the south)
  • Pine Level
    (12 miles [19.3 km] to the south)
  • Rocky Cross
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Rocky Cross have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rocky Cross
    • Rocky Cross is located in Nash County
  • Sims
    (13 miles [20.9 km] to the east)
  • Mount Pleasant
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Mount Pleasant have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Pleasant
    • Mount Pleasant is located in Nash County
  • Samaria
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Samaria have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Samaria
    • Samaria is located in Nash County
  • Knightdale
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Knightdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Knightdale
    • Knightdale is located in Wake County
    • Population from the 2020 Census: 18,122 people
    • Jump to TripAdvisor's Tourism page for Knightdale <3>

The official website for Johnston County: www.co.johnston.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Eason Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.6887, Longitude: -78.2866    
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 06 Apr 2024