Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Bryant Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Bryant Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Bryant Cemetery. We've listed the following communities based on their distance, with the closest first.
- Bladenboro
(4 miles [6.4 km] to the south)- Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bladenboro
- Bladenboro is located in Bladen County
- Population from the 2020 Census: 1,697 people
- Jump to TripAdvisor's Tourism page for Bladenboro <3>
- Dublin
(4 miles [6.4 km] to the northeast) - Butters
(5 miles [8 km] to the southwest) - Abbottsburg
(6 miles [9.7 km] to the southeast)- Jump to our Gazetteer entry for Abbottsburg
- Abbottsburg is located in Bladen County
- Yorick
(8 miles [12.9 km] to the northeast)- Jump to our Gazetteer entry for Yorick
- Yorick is located in Bladen County
- Allenton
(8 miles [12.9 km] to the west)- Jump to our Gazetteer entry for Allenton
- Allenton is located in Robeson County
- Clarkton
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkton
- Clarkton is located in Bladen County
- Population from the 2020 Census: 741 people
- Jump to TripAdvisor's Tourism page for Clarkton <3>
- Elizabethtown
(9 miles [14.5 km] to the east)- Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elizabethtown
- Elizabethtown is located in Bladen County
- Population from the 2020 Census: 3,378 people
- Jump to TripAdvisor's Tourism page for Elizabethtown <3>
- Ruskin
(9 miles [14.5 km] to the northeast)- Jump to our Gazetteer entry for Ruskin
- Ruskin is located in Bladen County
- Tar Heel
(9 miles [14.5 km] to the north)- Jump to our Gazetteer entry for Tar Heel
- Tar Heel is located in Bladen County
- Population from the 2020 Census: 115 people
- Jump to TripAdvisor's Tourism page for Tar Heel <3>
- Mount Olive
(10 miles [16.1 km] to the east)- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Bladen County
- Mount Olive
(11 miles [17.7 km] to the south)- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Columbus County
- White Oak
(11 miles [17.7 km] to the north)- Jump to our Gazetteer entry for White Oak
- White Oak is located in Bladen County
- Jump to TripAdvisor's Tourism page for White Oak <3>
- Rico
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Rico
- Rico is located in Columbus County
- Barker Ten Mile
(13 miles [20.9 km] to the northwest)- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Lumberton
(13 miles [20.9 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Lumberton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
- Boardman
(14 miles [22.5 km] to the southwest) - Evergreen
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Evergreen
- Evergreen is located in Columbus County
- White Lake
(15 miles [24.1 km] to the east)- Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Lake
- White Lake is located in Bladen County
- Population from the 2020 Census: 742 people
- Jump to TripAdvisor's Tourism page for White Lake <3>
- Orrum
(16 miles [25.7 km] to the southwest) - Jerome
(16 miles [25.7 km] to the north) - Rozier Siding ‑ Historic
(16 miles [25.7 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Rozier Siding. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rozier Siding
- Rozier Siding is located in Robeson County
- Proctorville
(17 miles [27.4 km] to the southwest)- Note: The GPS coordinates that we are using for Proctorville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Proctorville
- Proctorville is located in Robeson County
- Population from the 2020 Census: 119 people
- Rosindale
(17 miles [27.4 km] to the southeast) - Saddletree
(17 miles [27.4 km] to the northwest)- Jump to our Gazetteer entry for Saddletree
- Saddletree is located in Robeson County
Off-the-Road Links ...
The official website for Bladen County: www.bladeninfo.net/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Bryant Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.5960, Longitude: -78.7697 In this case, the coordinates for the Bryant Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |