RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Dare County >> Buffalo City >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that in 1895, Buffalo City had a post office and no railroad service.

The following communities are listed based on their distance from Buffalo City, with the one closest to Buffalo City listed first.

  • East Lake
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for East Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Lake
    • East Lake is located in Dare County
  • Manns Harbor
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for Manns Harbor have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Manns Harbor
    • Manns Harbor is located in Dare County
    • Jump to TripAdvisor's Tourism page for Manns Harbor <3>
  • Mashoes
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Mashoes have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mashoes
    • Mashoes is located in Dare County
  • Fort Landing
    (10 miles [16.1 km] to the northwest)
    • Jump to our Gazetteer entry for Fort Landing
    • Fort Landing is located in Tyrrell County
  • Gum Neck
    (14 miles [22.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Gum Neck have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gum Neck
    • Gum Neck is located in Tyrrell County
  • Stumpy Point
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Stumpy Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stumpy Point
    • Stumpy Point is located in Dare County
  • Manteo
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Manteo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Manteo
    • Manteo is located in Dare County
    • Population from the 2020 Census: 1,468 people
    • Jump to TripAdvisor's Tourism page for Manteo <3>
  • Wanchese
    (15 miles [24.1 km] to the east)
    • Note: The GPS coordinates that we are using for Wanchese have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wanchese
    • Wanchese is located in Dare County
    • Jump to TripAdvisor's Tourism page for Wanchese <3>
  • Colington
    (16 miles [25.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Colington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Colington
    • Colington is located in Dare County
  • Nags Head
    (18 miles [29 km] to the northeast)
  • Harbinger
    (18 miles [29 km] to the north)
    • Note: The GPS coordinates that we are using for Harbinger have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harbinger
    • Harbinger is located in Currituck County
    • Jump to TripAdvisor's Tourism page for Harbinger <3>
  • Columbia
    (19 miles [30.6 km] to the west)
    • Note: The GPS coordinates that we are using for Columbia have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Columbia
    • Columbia is located in Tyrrell County
    • Population from the 2020 Census: 752 people
    • Jump to TripAdvisor's Tourism page for Columbia <3>
  • Engelhard
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Engelhard have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Engelhard
    • Engelhard is located in Hyde County
    • Jump to TripAdvisor's Tourism page for Engelhard <3>
  • Middletown
    (25 miles [40.2 km] to the south)
    • Note: The GPS coordinates that we are using for Middletown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Middletown
    • Middletown is located in Hyde County
  • Jarvisburg
    (25 miles [40.2 km] to the north)
  • Lake Landing
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Lake Landing have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Landing
    • Lake Landing is located in Hyde County
  • Creswell
    (26 miles [41.8 km] to the west)
    • Note: The GPS coordinates that we are using for Creswell have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Creswell
    • Creswell is located in Washington County
    • Population from the 2020 Census: 232 people
    • Jump to TripAdvisor's Tourism page for Creswell <3>
  • Fairfield
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairfield
    • Fairfield is located in Hyde County
    • Jump to TripAdvisor's Tourism page for Fairfield <3>
  • Old Trap
    (28 miles [45.1 km] to the north)
    • Note: The GPS coordinates that we are using for Old Trap have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Trap
    • Old Trap is located in Camden County
  • Weeksville
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Weeksville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Weeksville
    • Weeksville is located in Pasquotank County

The official website for Dare County: www.co.dare.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Buffalo City, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024