RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Buncombe County >> Alexander >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Alexander. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Alexander.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Alexander - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 41 communities listed:

  • Arden
    (17 miles [27.4 km] to the southeast)
  • Asheville
    (8 miles [12.9 km] to the southeast)
  • Barnardsville
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Barnardsville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Barnardsville
    • Barnardsville is located in Buncombe County
    • Jump to TripAdvisor's Tourism page for Barnardsville <2>
  • Bat Cave
    (26 miles [41.8 km] to the southeast)
  • Black Mountain
    (18 miles [29 km] to the east)
    • Note: The GPS coordinates that we are using for Black Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Black Mountain
    • Black Mountain is located in Buncombe County
    • Population from the 2020 Census: 8,256 people
    • Jump to TripAdvisor's Tourism page for Black Mountain <2>
  • Burnsville
    (24 miles [38.6 km] to the northeast)
  • Candler
    (11 miles [17.7 km] to the south)
  • Canton
    (15 miles [24.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Canton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Canton
    • Canton is located in Haywood County
    • Population from the 2020 Census: 4,369 people
    • Jump to TripAdvisor's Tourism page for Canton <2>
  • Chimney Rock
    (28 miles [45.1 km] to the southeast)
  • Clyde
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Clyde have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clyde
    • Clyde is located in Haywood County
    • Population from the 2020 Census: 1,308 people
    • Jump to TripAdvisor's Tourism page for Clyde <2>
  • Del Rio
    (26 miles [41.8 km] to the northwest)
  • Enka
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Enka have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Enka
    • Enka is located in Buncombe County
    • Jump to TripAdvisor's Tourism page for Enka <2>
  • Etowah
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Etowah have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Etowah
    • Etowah is located in Henderson County
    • Jump to TripAdvisor's Tourism page for Etowah <2>
  • Fairview
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairview
    • Fairview is located in Buncombe County
    • Jump to TripAdvisor's Tourism page for Fairview <2>
  • Fletcher
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Fletcher have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fletcher
    • Fletcher is located in Henderson County
    • Population from the 2020 Census: 8,439 people
    • Jump to TripAdvisor's Tourism page for Fletcher <2>
  • Gerton
    (22 miles [35.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Gerton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gerton
    • Gerton is located in Henderson County
    • Jump to TripAdvisor's Tourism page for Gerton <2>
  • Green Mountain
    (29 miles [46.7 km] to the northeast)
  • Hartford
    (29 miles [46.7 km] to the west)
  • Hendersonville
    (28 miles [45.1 km] to the south)
  • Horse Shoe
    (24 miles [38.6 km] to the south)
  • Hot Springs
    (17 miles [27.4 km] to the northwest)
  • Lake Junaluska
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lake Junaluska have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Junaluska
    • Lake Junaluska is located in Haywood County
    • Jump to TripAdvisor's Tourism page for Lake Junaluska <2>
  • Lake Lure
    (30 miles [48.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Lake Lure have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Lure
    • Lake Lure is located in Rutherford County
    • Population from the 2020 Census: 1,153 people
    • Jump to TripAdvisor's Tourism page for Lake Lure <2>
  • Laurel Park
    (27 miles [43.5 km] to the south)
    • Note: The GPS coordinates that we are using for Laurel Park have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Laurel Park
    • Laurel Park is located in Henderson County
    • Population from the 2020 Census: 2,339 people
    • Jump to TripAdvisor's Tourism page for Laurel Park <2>
  • Leicester
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Leicester have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leicester
    • Leicester is located in Buncombe County
    • Jump to TripAdvisor's Tourism page for Leicester <2>
  • Maggie Valley
    (28 miles [45.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Maggie Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maggie Valley
    • Maggie Valley is located in Haywood County
    • Population from the 2020 Census: 1,258 people
    • Jump to TripAdvisor's Tourism page for Maggie Valley <2>
  • Mars Hill
    (10 miles [16.1 km] to the northeast)
  • Marshall
    (7 miles [11.3 km] to the north)
  • Micaville
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Micaville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Micaville
    • Micaville is located in Yancey County
    • Jump to TripAdvisor's Tourism page for Micaville <2>
  • Mills River
    (21 miles [33.8 km] to the south)
  • Montreat
    (19 miles [30.6 km] to the east)
    • Note: The GPS coordinates that we are using for Montreat have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montreat
    • Montreat is located in Buncombe County
    • Population from the 2020 Census: 939 people
    • Jump to TripAdvisor's Tourism page for Montreat <2>
  • Mountain Home
    (24 miles [38.6 km] to the south)
    • Note: The GPS coordinates that we are using for Mountain Home have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mountain Home
    • Mountain Home is located in Henderson County
    • Jump to TripAdvisor's Tourism page for Mountain Home <2>
  • Old Fort
    (26 miles [41.8 km] to the east)
    • Note: The GPS coordinates that we are using for Old Fort have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Fort
    • Old Fort is located in McDowell County
    • Population from the 2020 Census: 924 people
    • Jump to TripAdvisor's Tourism page for Old Fort <2>
  • Penrose
    (29 miles [46.7 km] to the south)
    • Note: The GPS coordinates that we are using for Penrose have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Penrose
    • Penrose is located in Transylvania County
    • Jump to TripAdvisor's Tourism page for Penrose <2>
  • Pisgah Forest
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Pisgah Forest have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pisgah Forest
    • Pisgah Forest is located in Transylvania County
    • Jump to TripAdvisor's Tourism page for Pisgah Forest <2>
  • Ridgecrest
    (20 miles [32.2 km] to the east)
  • Skyland
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Skyland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Skyland
    • Skyland is located in Buncombe County
    • Jump to TripAdvisor's Tourism page for Skyland <2>
  • Swannanoa
    (15 miles [24.1 km] to the southeast)
  • Waynesville
    (25 miles [40.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Waynesville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Waynesville
    • Waynesville is located in Haywood County
    • Population from the 2020 Census: 10,557 people
    • Jump to TripAdvisor's Tourism page for Waynesville <2>
  • Weaverville
    (4 miles [6.4 km] to the east)
  • Woodfin
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Woodfin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodfin
    • Woodfin is located in Buncombe County
    • Population from the 2020 Census: 6,679 people
    • Jump to TripAdvisor's Tourism page for Woodfin <2>

Unfortunately, we don't know of an official website for Alexander. If you can help, please contact us through our Feedback Page.

The official website for Buncombe County: www.buncombecounty.org/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Alexander) to Point B.Our distance measurements begin at a specific point in Alexander. The point we use is located at these GPS coordinates - Latitude: 35.6985, Longitude: -82.6382    
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024