Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Craig Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Craig Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Craig Cemetery. We've listed the following communities based on their distance, with the closest first.
- Craig
(Less than 2 miles to the southeast)
- Mid Canon
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for Mid Canon
- Mid Canon is located in Cascade County
- Wolf Creek
(6 miles [9.7 km] to the southwest)
- Dearborn Crossing ‑ Historic
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Dearborn Crossing. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Dearborn Crossing
- Dearborn Crossing is located in Lewis and Clark County
- Dearborn Crossing has also been known as:
- Dearborn City
- Dearborn
- Cascade
(18 miles [29 km] to the northeast)
- Canyon Creek
(23 miles [37 km] to the southwest)
- Silver City
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver City
- Silver City is located in Lewis and Clark County
- Marysville ‑ Historic
(27 miles [43.5 km] to the southwest)
- Millegan
(28 miles [45.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Millegan. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Millegan
- Millegan is located in Cascade County
- Simms
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Simms have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Simms
- Simms is located in Cascade County
- Jump to TripAdvisor's Tourism page for Simms <2>
- Atlantic City ‑ Historic
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Atlantic City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atlantic City
- Atlantic City is located in Lewis and Clark County
- Birdseye
(29 miles [46.7 km] to the south)
- Jump to our Gazetteer entry for Birdseye
- Birdseye is located in Lewis and Clark County
Off-the-Road Links ...
The official website for Lewis and Clark County: www.co.lewis-clark.mt.us/
The official website for State of Montana: https://mt.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Craig Cemetery. The point we use is located at these GPS coordinates - Latitude: 47.0777, Longitude: -111.9689 In this case, the coordinates for the Craig Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |