|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Sago in the Atlas, the following communities of the 1890's would have been found near the current location of Sago. The following communities are listed based on their distance, with the one closest to Sago listed first.
- Grace
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Grace have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grace
- Grace is located in Issaquena County
- Nitta Yuma
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for Nitta Yuma
- Nitta Yuma is located in Sharkey County
- Panther Burn
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for Panther Burn
- Panther Burn is located in Sharkey County
- Lorenzen
(5 miles [8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Lorenzen. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lorenzen
- Lorenzen is located in Sharkey County
- Percy
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Percy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Percy
- Percy is located in Washington County
- Hampton
(5 miles [8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hampton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hampton
- Hampton is located in Washington County
- Mont Helena
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Mont Helena. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mont Helena
- Mont Helena is located in Sharkey County
- Anguilla
(6 miles [9.7 km] to the southeast)
- Glen Allan
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Glen Allan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen Allan
- Glen Allan is located in Washington County
- Riverside Junction
(7 miles [11.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Riverside Junction. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Riverside Junction
- Riverside Junction is located in Sharkey County
- Rolling Fork
(8 miles [12.9 km] to the south)
- Overby
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Overby. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Overby
- Overby is located in Washington County
- Erwin
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Erwin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Erwin
- Erwin is located in Washington County
- Hollandale
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Hollandale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hollandale
- Hollandale is located in Washington County
- Population from the 2020 Census: 2,242 people
- Jump to TripAdvisor's Tourism page for Hollandale <4>
- Egremont
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Egremont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Egremont
- Egremont is located in Sharkey County
- Auter
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Auter. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Auter
- Auter is located in Sharkey County
- Warsaw
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warsaw
- Warsaw is located in Washington County
- Longwood
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Longwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Longwood
- Longwood is located in Washington County
- Chatham
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Chatham have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chatham
- Chatham is located in Washington County
- Mayersville
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Mayersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mayersville
- Mayersville is located in Issaquena County
- Population from the 2020 Census: 517 people
- Murphy
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Murphy. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Murphy
- Murphy is located in Washington County
- James
(14 miles [22.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for James. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for James
- James is located in Washington County
- Lake Washington ‑ Historic
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Lake Washington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Washington
- Lake Washington is located in Washington County
- Benham ‑ Historic
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Benham have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benham
- Benham is located in East Carroll Parish (LA)
- Cary
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Cary have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cary
- Cary is located in Sharkey County
- Population from the 2020 Census: 264 people
- Avon
(15 miles [24.1 km] to the northwest)
- Jump to our Gazetteer entry for Avon
- Avon is located in Washington County
- Sterling ‑ Historic
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Sterling have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sterling
- Sterling is located in Chicot County (AR)
Off-the-Road Links ...
The official website for State of Mississippi: https://www.ms.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Sago, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|