|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Kracker Station in the Atlas, the following communities of the 1890's would have been found near the current location of Kracker Station. The following communities are listed based on their distance, with the one closest to Kracker Station listed first.
- Pulaski
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Pulaski have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pulaski
- Pulaski is located in Scott County
- Morton
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Morton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morton
- Morton is located in Scott County
- Population from the 2020 Census: 3,522 people
- Jump to TripAdvisor's Tourism page for Morton <3>
- Polkville
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Polkville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Polkville
- Polkville is located in Smith County
- Population from the 2020 Census: 819 people
- Pelahatchie
(7 miles [11.3 km] to the west)
- Lynwood ‑ Historic
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Lynwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynwood
- Lynwood is located in Rankin County
- Trenton
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Trenton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trenton
- Trenton is located in Smith County
- Raworth
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Raworth
- Raworth is located in Scott County
- Daniel
(10 miles [16.1 km] to the south)
- Jump to our Gazetteer entry for Daniel
- Daniel is located in Smith County
- Homewood
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Homewood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Homewood
- Homewood is located in Scott County
- Burns
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Burns. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Burns
- Burns is located in Smith County
- Rankin
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Rankin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rankin
- Rankin is located in Rankin County
- Johns
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Johns have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johns
- Johns is located in Rankin County
- Gunn
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Gunn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gunn
- Gunn is located in Smith County
- Forest
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Forest. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Forest
- Forest is located in Scott County
- Population from the 2020 Census: 5,483 people
- Jump to TripAdvisor's Tourism page for Forest <3>
- Dobson ‑ Historic
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Dobson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dobson
- Dobson is located in Rankin County
- Puckett
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Puckett have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Puckett
- Puckett is located in Rankin County
- Population from the 2020 Census: 346 people
- Norris
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Norris have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norris
- Norris is located in Scott County
- Shongelo
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Shongelo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shongelo
- Shongelo is located in Smith County
- Beach
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Beach. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Beach
- Beach is located in Scott County
- Hillsboro
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Hillsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillsboro
- Hillsboro is located in Scott County
- Cato
(17 miles [27.4 km] to the southwest)
- Jump to our Gazetteer entry for Cato
- Cato is located in Rankin County
- Eureka
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Eureka have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eureka
- Eureka is located in Rankin County
- Lillian
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Lillian have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lillian
- Lillian is located in Scott County
- Harperville
(18 miles [29 km] to the northeast)
- Jump to our Gazetteer entry for Harperville
- Harperville is located in Scott County
- Goshen Springs
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Goshen Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goshen Springs
- Goshen Springs is located in Rankin County
- Fannin
(18 miles [29 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Fannin. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Fannin
- Fannin is located in Rankin County
- Brandon
(18 miles [29 km] to the west)
Off-the-Road Links ...
The official website for State of Mississippi: https://www.ms.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Kracker Station, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|